Management of Collaborative Research Works within the Bulk Nanostructure Metals Project

• Project Area: Bulk Nanostructured Metals -New Metallurgy of Novel Structural Materials
• Project/Area Number: 22102001
• Research Category: Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
• Allocation Type: Single-year Grants
• Review Section: Science and Engineering
• Research Institution: Kyoto University
• Principal Investigator: TSUJI Nobuhiro 京都大学, 工学(系)研究科(研究院), 教授 (30263213)
• Co-Investigator(Kenkyū-buntansha): HORITA Zenji 九州大学, 工学(系)研究科(研究院), 教授 (20173643) ; OGATA Narinobu 大阪大学, 基礎工学研究科, 教授 (20273584) ; SHIMOKAWA Tomotsugu 金沢大学, 機械工学系, 教授 (40361977) ; KATO Masaharu 東京工業大学, 総合理工学研究科(研究院), 教授 (50161120) ; YANAGIMOTO Jun 東京大学, 生産技術研究所, 教授 (90220194)
• Project Period (FY): 2010-04-01 – 2016-03-31
• Project Status: Completed (Fiscal Year 2015)
• Budget Amount: ¥43,550,000 (Direct Cost: ¥33,500,000、Indirect Cost: ¥10,050,000); Fiscal Year 2015: ¥3,900,000 (Direct Cost: ¥3,000,000、Indirect Cost: ¥900,000); Fiscal Year 2014: ¥7,670,000 (Direct Cost: ¥5,900,000、Indirect Cost: ¥1,770,000); Fiscal Year 2013: ¥7,020,000 (Direct Cost: ¥5,400,000、Indirect Cost: ¥1,620,000); Fiscal Year 2012: ¥12,350,000 (Direct Cost: ¥9,500,000、Indirect Cost: ¥2,850,000); Fiscal Year 2011: ¥6,370,000 (Direct Cost: ¥4,900,000、Indirect Cost: ¥1,470,000); Fiscal Year 2010: ¥6,240,000 (Direct Cost: ¥4,800,000、Indirect Cost: ¥1,440,000)
• Keywords: 構造・機能材料 / 社会基盤構造材料 / バルクナノメタル / 力学特性 / 転位 / 粒界 / 強度 / 延性 / 構造用金属材料 / ナノ結晶 / 超微細粒 / 結晶粒界 / 連携 / 成果発信 / 共通試料

Outline of Annual Research Achievements

新学術領域研究「バルクナノメタル　～常識を覆す新しい構造材料の科学」は、平成22年度に採択され、バルクナノメタルに関する研究を５年間集中的に行なった。バルクナノメタル（Bulk Nanostructured Metals）とは、マトリクスを構成する結晶粒の平均粒径が１μm以下である金属系多結晶バルク材と定義され、従来粒径材とは大きく異なる特異な特性を種々示す。本課題は、バルクナノメタル新学術領域の優れた研究成果を終了後の１年間で取りまとめ総括するとともに、確かな記録として整備した上で学会・社会に成果発信することを目的とした。
バルクナノメタル新学術領域の総括班メンバー６名（領域代表者と各計画研究の研究代表者）により構成された本課題では、それぞれ役割分担を行って、平成27年度に以下の取りまとめと総括を実施した。
(1)研究成果の電子アーカイブ化：プロジェクトから生まれた研究成果（学術雑誌論文、国際会議論文、国内・国際会議発表、解説・総説論文、著書、特許、受賞など）をリストとして取りまとめ、論文PDFまたはそれらへのリンクとともに電子アーカイブ化した。
(2)成果の情報発信：ニュースレター最終版を2015年8月に発行し、印刷版及び電子版を関係者に配布した。(3)国際ワークショップの開催：2015年8月3日～8月5日に、京都大学楽友会館でバルクナノメタル国際ワークショップを開催し、成果を海外研究者に示すとともに、活発かつ有益な討論を行った。
(4)2015年度に実施されたバルクナノメタル新学術領域の事後評価対応を行い、A評価を受けた。

Research Progress Status

27年度が最終年度であるため、記入しない。

Strategy for Future Research Activity

27年度が最終年度であるため、記入しない。

Research Products

• [Int'l Joint Research] デンマーク工科大学(デンマーク)
• [Int'l Joint Research] ルンド工科大学(スウェーデン)
• [Int'l Joint Research] インド工科大学ハイデラバード校(インド)
• [Int'l Joint Research] 清華大学(中国)
• [Journal Article] “Ductility Sensitivity to Stacking Fault Energy and Grain Size in Cu-Al Alloys (2016)
  • Author(s): Yanzhong Tian, Akinobu Shibata, Zhefeng Zhang and Nobuhiro Tsuji
  • Journal Title: Materials Research Letters Volume: 4 Issue: 2 Pages: 112-117
  • DOI: 10.1080/21663831.2015.1136969
  • Peer Reviewed / Open Access / Int'l Joint Research / Acknowledgement Compliant
• [Journal Article] Ultrafine Ferrite Formation through Cold-Rolling and Annealing of Low-Carbon Dual-Phase Steel (2015)
  • Author(s): Yoshitaka Okitsu, Naoki Takata and Nobuhiro Tsuji
  • Journal Title: Materials Science and Technology Volume: 31 Issue: 6 Pages: 745-754
  • DOI: 10.1179/1743284714y.0000000660
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Recrystallization behavior of CoCrCuFeNi high-entropy alloy (2015)
  • Author(s): Nokeun Park, Ikuto Watanabe, Daisuke Terada, Y. Yokoyama, Peter Liaw, and Nobuhiro Tsuji
  • Journal Title: Metall. Mater. Trans. A Volume: 46 Issue: 4 Pages: 1481-1487
  • DOI: 10.1007/s11661-014-2594-5
  • NAID: 120005657908
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes (2015)
  • Author(s): Y.Z. Tian, L.J. Zhao, S. Chen, A. Shibata, Z.F. Zhang, N.Tsuji
  • Journal Title: Scientific Reports Volume: 5 Pages: 16707-16707
  • DOI: 10.1016/j.msea.2015.11.017
  • NAID: 120005672575
  • Peer Reviewed / Open Access / Int'l Joint Research / Acknowledgement Compliant
• [Journal Article] Cold Formability of AZ31 Wrought Magnesium Alloy Undergoing Semisolid Spheroidization Treatment (2015)
  • Author(s): Y.Meng, S. Fukushima, S.Sugiyama and J.Yanagimoto
  • Journal Title: Materials Science and Engineering A Volume: 624 Pages: 148-156
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Atomic-scale intergranular crack-tip plasticity in tilt grain boundaries acting as an effective dislocation source (2015)
  • Author(s): T. Shimokawa and T. Tsuboi
  • Journal Title: Acta Mater. Volume: 87 Pages: 233-247
  • DOI: 10.1016/j.actamat.2015.01.002
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF Steel (2014)
  • Author(s): S. Gao, M. Chen, M. Joshi, A. Shibata, N. Tsuji
  • Journal Title: MATERIALS TRANSACTIONS Volume: 55 Issue: 1 Pages: 73-77
  • DOI: 10.2320/matertrans.MA201317
  • NAID: 130004825139
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Nanograin formation of GaAs by high-pressure torsion (2014)
  • Author(s): Y. Ikoma, Y. Ejiri, K. Hayano, K. Saito, Q. Guo and Z. Horita
  • Journal Title: Philosophical Magazine Letters Volume: 94 Issue: 1 Pages: 1-8
  • DOI: 10.1080/09500839.2013.852265
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Effects of Temperature and Strain Rate on Plastic Deformation of Ultrafine-Grained Copper Prepared by Equal-Channel Angular Pressing (2014)
  • Author(s): S. Okubo, H. Abe, Y. Miyajima, T. Fujii, S. Onaka, and M. Kato
  • Journal Title: MATERIALS TRANSACTIONS Volume: 55 Issue: 10 Pages: 1525-1530
  • DOI: 10.2320/matertrans.M2014172
  • NAID: 130004678159
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Influence of Competition between Intragranular Dislocation Nucleation and Intergranular Slip Transfer on Mechanical Properties of Ultrafine-Grained Metals (2014)
  • Author(s): T. Tsuru, Y. Aoyagi, Y. Kaji and T. Shimokawa
  • Journal Title: Journal of the Japan Institute of Metals and Materials Volume: 78 Issue: 1 Pages: 45-51
  • DOI: 10.2320/jinstmet.J2013039
  • NAID: 130004786447
  • ISSN: 0021-4876, 1880-6880, 2433-7501
  • Peer Reviewed
• [Journal Article] Fully Recrystallized Nanostrueture Fabricated without Severe Plastic Deformation in High-Mn Austenitic Steel (2013)
  • Author(s): R. Saha
  • Journal Title: Scripta Materialia Volume: 68 Issue: 10 Pages: 813-816
  • DOI: 10.1016/j.scriptamat.2013.01.038
  • Peer Reviewed
• [Journal Article] Entropic Effect on Creep in Nanocrystalline Metals (2013)
  • Author(s): Y. J. Wang, A. Ishii and S. Ogata
  • Journal Title: Acta Materialia Volume: 61 Issue: 10 Pages: 3886-3886
  • DOI: 10.1016/j.actamat.2013.03.026
  • Peer Reviewed
• [Journal Article] High-Pressure Torsion for Enhanced Atomic Diffusion and Promoting Solid-State Reactions in Aluminum-Copper System (2013)
  • Author(s): K. Oh-ishi, K. Edalati, H. S. Kim, K. Hono and Z. Horita
  • Journal Title: Acta Materialia Volume: 61 Issue: 9 Pages: 3482-3489
  • DOI: 10.1016/j.actamat.2013.02.042
  • NAID: 120005227405
  • Peer Reviewed
• [Journal Article] Cross-Sectional Distributions of Mechanical Properties of Fine Cu–Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending (2013)
  • Author(s): J. Tokutomi, K. Hanazaki, N. Tsuji, J. Yanagimoto
  • Journal Title: MATERIALS TRANSACTIONS Volume: 54 Issue: 9 Pages: 1634-1641
  • DOI: 10.2320/matertrans.MH201323
  • NAID: 10031194648
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Effects of Si on mechanical properties and microstructure evolution in ultrafinegrained Cu-Si alloys processed by accumulative roll bonding (2013)
  • Author(s): Y. Miyajima, H. Abe, T. Fujii, S. Onaka and M. Kato
  • Journal Title: Acta Materialia Volume: 61 Issue: 5 Pages: 1537-1544
  • DOI: 10.1016/j.actamat.2012.11.031
  • Peer Reviewed
• [Journal Article] アルミニウムの巨大ひずみ加工に伴う超微細粒組織の形成機構 (2012)
  • Author(s): 辻 伸泰
  • Journal Title: 軽金属 Volume: 62 Pages: 392-397
  • NAID: 10031160134
  • Peer Reviewed
• [Journal Article] Possibilities to Manage Both High Strength and Good Ductility in Nanostructured Metals (2012)
  • Author(s): N.Tsuji
  • Journal Title: Proc. of the 33rd Riso Int. Symp. on Mater. Sci.: Nanometals #8211; Status and Perspective Volume: 33 Pages: 143-160
  • Peer Reviewed
• [Journal Article] Comparative Analysis of Plastic Flow and Grain Refinement in Pure Aluminium Subjected to Simple Shear-Based Severe Plastic Deformation Processing (2012)
  • Author(s): D.Orlov, Y.Todaka, M.Umemoto, Y.Beygelzimer, N.Tsuji
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 17-25
  • DOI: 10.2320/matertrans.MD201113
  • NAID: 130004454818
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Microstructural Evolution during ARB Process of Al–0.2 mass% Sc Alloy Containing Al₃Sc Precipitates in Starting Structures (2012)
  • Author(s): E.Borhani, H.Jafarian, D.Terada, H.Adachi, N.Tsuji
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 72-80
  • DOI: 10.2320/matertrans.MD201125
  • NAID: 130004454823
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Novel Process for Fabricating Ultrafine Grained Copper Wire Having High Tensile Ductility and High Electric Conductivity (2012)
  • Author(s): K.Hanazaki, J.Tokutomi, I.Yanagimoto, N.Tsuji
  • Journal Title: Mater.Sci.Eng.A Volume: 534 Pages: 720-723
  • DOI: 10.1016/j.msea.2011.12.030
  • Peer Reviewed
• [Journal Article] Effect of Deformation Temperature on Microstructure Evolution in ARB Processed Ultralow Carbon IF Steel (2012)
  • Author(s): N.Kamikawa, N.Tsuji
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 30-37
  • DOI: 10.2320/matertrans.MD201115
  • NAID: 130004454821
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu–Sn Alloy Manufactured by Continuous Draw Bending (2012)
  • Author(s): J.Tokutomi, K.Hanazaki, N.Tsuji, I.Yanagimoto
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 116-122
  • DOI: 10.2320/matertrans.MD201114
  • NAID: 130004454828
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Dynamic Deformation Behavior of Ultrafine Grained Iron Produced by Accumulative Roll Bonding and Annealing (2011)
  • Author(s): Y.Okitsu, N.Takata, N.Tsuji
  • Journal Title: Scripta Mater Volume: 64 Issue: 9 Pages: 896-899
  • DOI: 10.1016/j.scriptamat.2011.01.026
  • Peer Reviewed
• [Journal Article] Effects of Si Addition on Mechanical Properties of Copper Severely Deformed by Accumulative Roll-Bonding (2011)
  • Author(s): T.Kunimine, T.Fujii, S.Onaka, N.Tsuji, M.Kato
  • Journal Title: J.Mater.Sci. Volume: 46 Issue: 12 Pages: 4290-4295
  • DOI: 10.1007/s10853-010-5235-4
  • Peer Reviewed
• [Journal Article] Continuous Bending-Drawing Process to Manufacture the Ultrafine Copper Wire with Excellent Electrical and Mechanical Pronperties (2011)
  • Author(s): J.Yanagimoto, J.Tokutomi, K.Hanazaki, N.Tsuji
  • Journal Title: CIRP Annals Manufacturing Technology Volume: 60 Issue: 1 Pages: 279-282
  • DOI: 10.1016/j.cirp.2011.03.148
  • Peer Reviewed
• [Journal Article] Effect of Initial Microstructure on Ultrafine Grain Formation through Warm Deformation in Medium Carbon Steels (2011)
  • Author(s): K.Hase, N.Tsuji
  • Journal Title: Scripta Mater Volume: 65 Issue: 5 Pages: 404-407
  • DOI: 10.1016/j.scriptamat.2011.05.018
  • Peer Reviewed
• [Journal Article] Effect of Initial Grain Size on the Evolution of {001}<100> Texture in Severely Deformed and Annealed High Purity Nickel (2011)
  • Author(s): P.P.Bhattacharjee, N.Tsuji, R.K.Ray
  • Journal Title: Metall.Mater.Trans.A Volume: 9 Issue: 9 Pages: 2769-2780
  • DOI: 10.1007/s11661-011-0674-3
  • Peer Reviewed
• [Journal Article] Processing of Nanostructured Metals and Alloys via Plastic Deformation (2010)
  • Author(s): Yuntian Zhu, Ruslan Z.Valiev, Terrence G.Langdon, Nobuhiro Tsuji, Ke Lu
  • Journal Title: MRS Bulletin Volume: 35 Pages: 977-981
  • Peer Reviewed
• [Journal Article] 巨大ひずみ加工による純チタンの結晶粒超微細化 (2010)
  • Author(s): 辻伸泰、寺田大将、北原弘基、井上誠哉
  • Journal Title: チタン Volume: 58 Pages: 140-144
  • NAID: 40017113345
  • Peer Reviewed
• [Journal Article] 巨大ひずみ加工により作製された超微細粒Al合金からの時効析出 (2010)
  • Author(s): 辻伸泰、寺田大将、中川恵友、金谷輝人
  • Journal Title: まてりあ Volume: 49 Pages: 305-306
  • NAID: 10026872738
  • Peer Reviewed
• [Presentation] Effect of Grain Size Distribution on Discontinuous Yielding in Ultrafine Grained Metals (2015)
  • Author(s): N.Tsuji, D.Terada, H.Houda and S.Gao
  • Organizer: 2015 MRS Fall Meeting
  • Place of Presentation: 米国、ボストン
  • Year and Date: 2015-11-29
  • Int'l Joint Research / Invited
• [Presentation] Unique Mechanical Properties of Ultrafine Grained Metals (2015)
  • Author(s): N.Tsuji
  • Organizer: International Symposium for 50 Years of Materials Research in Erlangen at The Institute I
  • Place of Presentation: ドイツ、 Friedrich-Alexander University Erlangen-Nuerunberg
  • Year and Date: 2015-10-27
  • Int'l Joint Research / Invited
• [Presentation] Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization (2015)
  • Author(s): Myeong-Heom Park, Alinobu Shibata and Nobuhiro Tsuji
  • Organizer: 36th Riso International Symposium on Materials Science: Effects of Deformation Induced Structural Variations on Annealing Mechanisms
  • Place of Presentation: デンマーク、Roskilde
  • Year and Date: 2015-09-07
  • Int'l Joint Research
• [Presentation] Achievements in Bulk Nanostructured Metals Project (2015)
  • Author(s): N.Tsuji
  • Organizer: GSAM 2015
  • Place of Presentation: 福岡
  • Year and Date: 2015-09-04
  • Int'l Joint Research / Invited
• [Presentation] Strain Localization during Tensile Test of IF Steel with Various Grain Size (2015)
  • Author(s): S.Gao, M.Chen, A.Shibata, N.Kamikawa and N.Tsuji
  • Organizer: ICSMA 17
  • Place of Presentation: チェコ、Bruno
  • Year and Date: 2015-08-10
  • Int'l Joint Research
• [Presentation] Adaptive-boost molecular dynamics simulation of thermally activated motions of crystal imperfections (2014)
  • Author(s): S.Ogata, A.Ishii, Y-.J. Wang
  • Organizer: The 9th General Meeting of ACCMS-VO
  • Place of Presentation: Okinawa, Japan
  • Year and Date: 2014-12-19 – 2014-12-21
  • Invited
• [Presentation] Atomic simulation of the role of the interface on mechanical properties of pearlite steel (2014)
  • Author(s): T.Shimokawa
  • Organizer: The 4th International symposium on steel science &#8211; ISSS2014
  • Place of Presentation: 京都
  • Year and Date: 2014-11-03 – 2014-11-06
  • Invited
• [Presentation] 強間強せん断変形および圧縮変形によるミクロ・ナノ組織変化の物理シミュ レーション (2014)
  • Author(s): 林 妗諭、杉山澄雄、柳本 潤
  • Organizer: 第65回塑性加工連合講演会
  • Place of Presentation: 岡山大学 津島キャンパス
  • Year and Date: 2014-10-11 – 2014-11-13
• [Presentation] UFG-Ni の焼鈍に伴うビッカース硬さおよび蓄積エネルギーの変化と組織の関係 (2014)
  • Author(s): 宮嶋 陽司，上田 太郎，足立 大樹，藤居 俊之，尾中 晋，加藤 雅
  • Organizer: 日本金属学会秋季講演大会
  • Place of Presentation: 名古屋大学
  • Year and Date: 2014-09-24 – 2014-09-26
• [Presentation] Possibilities of Nanostructured Metals as Advanced Structural Ma (2014)
  • Author(s): N.Tsuji
  • Organizer: The 2nd V4-JST Workshop on Advanced Materials
  • Place of Presentation: Warsaw, Poland
  • Year and Date: 2014-09-17 – 2014-09-18
  • Invited
• [Presentation] Production of Bulk Nanostructured Materials with Enhanced Functionality Using High-Pressure Torsion (2014)
  • Author(s): Zenji Horita
  • Organizer: XII International Conference on Nanostructured Materials (NANO 2014)
  • Place of Presentation: Lomonosov Moscow State University, Moscow, Russia
  • Year and Date: 2014-07-13 – 2014-07-18
  • Invited
• [Presentation] Possibilities of Nanostructured Steels (2013)
  • Author(s): Nobuhiro Tsuji, Daisuke Terada, Akinobu Shibata and Nokeun Park
  • Organizer: The 5th Baosteel Biennial Academic Conference
  • Place of Presentation: Shanghai, China
  • Invited
• [Presentation] 力学計算から見た変形の素過程 (2013)
  • Author(s): 尾方成信
  • Organizer: 日本金属学会秋期大会
  • Place of Presentation: 金沢大学
  • Invited
• [Presentation] Ultrafine-Grained Structures and Superplasticity after Processing by Severe Plastic Deformation (2013)
  • Author(s): Zenji Horita
  • Organizer: International Symposium on Strength of Fine Grained Materials &#8211; 60 years of Hall-Petch
  • Place of Presentation: 東京大学
  • Invited
• [Presentation] 超微細低炭素鋼の強靭化 (2013)
  • Author(s): 井上忠信, C. Wang, Q. Hai
  • Organizer: 日本金属学会2013年秋期（第153回）講演大会
  • Place of Presentation: 金沢大学
  • Invited
• [Presentation] A dislocation model for deformation of ultrafine-grained crystals: effect of grain size, temperature and strain rate (2013)
  • Author(s): M. Kato
  • Organizer: International Symposium on Strength of Fine Grained Materials - 60 years of Hall-Petch
  • Place of Presentation: 東京大学
  • Invited
• [Presentation] A multiscale approach for investigation the ductility of pearlitic steel (2013)
  • Author(s): T. Shimokawa, M. Tanaka, K. Higashida and T. Ohashi
  • Organizer: KIM-JIM Symposium (in JIM Annual Fall Meeting)
  • Place of Presentation: 金沢大学
  • Invited
• [Presentation] 巨大ひずみ加工あるいは強加工を必要としないプロセスによるバルクナノメタルの創製 (2012)
  • Author(s): 辻 伸泰
  • Organizer: 粉体粉末冶金協会 平成24年度秋期大会
  • Place of Presentation: 粉体粉末冶金協会 平成24年度秋期大会
  • Year and Date: 2012-11-22
  • Invited
• [Presentation] Fundamental Understanding on Unique Mechanical Properties of Bulk Nanostructured Metals (2012)
  • Author(s): N. Tsuji
  • Organizer: International Workshop on Bulk Nanostructured Metals
  • Place of Presentation: 京都大学
  • Year and Date: 2012-09-26
  • Invited
• [Presentation] Fabrication of Bulk Nanostructured Metals by Severe Plastic Deformation or by Processes without Severe Plastic Deformation (2012)
  • Author(s): Nobuhiro Tsuji
  • Organizer: Int. Conf. on Advanced Materials Processing Technology
  • Place of Presentation: Wollongong, Australia
  • Year and Date: 2012-09-24
  • Invited
• [Presentation] Unique Mechanical Properties of Bulk Nanostructured Metals (2012)
  • Author(s): Nobuhiro Tsuji
  • Organizer: Int. Conf. on Strength of Metals and Alloys
  • Place of Presentation: Bangalore, India
  • Year and Date: 2012-08-20
  • Invited
• [Presentation] アルミニウムの巨大ひずみ加工による超微細粒組織の形成におよぼす温度と歪み速度の影響 (2012)
  • Author(s): 辻 伸泰
  • Organizer: 軽金属学会春期講演大会
  • Place of Presentation: 九州大学伊都キャンパス
  • Year and Date: 2012-05-19
  • Invited
• [Presentation] Possibilities to Manage Both Strength and Ductility in Bulk Nanostructured Steels (2011)
  • Author(s): N.Tsuji
  • Organizer: Int.Symp.on Material Science and Innovation for Sustainable Society
  • Place of Presentation: ホテル阪急エキスポパーク(大阪府)(招待講演)
  • Year and Date: 2011-11-28
• [Presentation] Acceleration of Grain Refinement by Repeating Severe Plastic Deformation and Phase Transformation in Fe-Ni-C Alloys (2011)
  • Author(s): N.Tsuji, T.Maekawa, D.Terada, N.Takata
  • Organizer: Thermec 2011 : Severe Plastic Deformation
  • Place of Presentation: ケベック(カナダ)(招待講演)
  • Year and Date: 2011-08-04
• [Presentation] バルクナノメタルの特異な力学特性:転位運動に対する粒界の役割 (2011)
  • Author(s): 辻伸泰
  • Organizer: 第1回マルチスケールマテリアルモデリングシンポジウム
  • Place of Presentation: 大阪大学コンベンションセンター
  • Year and Date: 2011-05-23
• [Presentation] Possibilities to Manage Both Strength and Ductility in Nanostructured Steels (2011)
  • Author(s): N.Tsuji
  • Organizer: Seminar at Seoul National University
  • Place of Presentation: ソウル(韓国)(招待講演)
• [Presentation] Macro-, Meso- and Nano-scale Analysis of Deformation Behaviors in Nano-structured or Hetero-structured Metallic Materials (2011)
  • Author(s): N.Tsuji
  • Organizer: The 4th Int.Workshop on Materials Behavior at Micro- and Nano-Scale
  • Place of Presentation: 西安(中国)(招待講演)
• [Presentation] バルクナノメタル:常識を覆す構造用金属材料 (2010)
  • Author(s): 辻伸泰
  • Organizer: 京都産学公連携フォーラム2010
  • Place of Presentation: 京都工業会館(招待講演)
  • Year and Date: 2010-11-12
• [Presentation] 常識を覆す新しい社会基盤材料としてのバルクナノメタルの可能性 (2010)
  • Author(s): 辻伸泰
  • Organizer: 日本鉄鋼協会・日本金属学会関西支部 材料開発研究会 平成22年度第1回研究会「社会基盤材料の新展開」
  • Place of Presentation: クリエイション・コア東大阪(招待講演)
  • Year and Date: 2010-09-15
• [Presentation] 常識を覆す新しい構造材料としてのバルクナノメタル～実験により得られた興味深い力学挙動と計算に期待するもの (2010)
  • Author(s): 辻伸泰
  • Organizer: 金研シンポジウム「計算材料科学の展望:次世代スパコンによる飛躍を目指して」
  • Place of Presentation: 東北大学金属材料研究所(招待講演)
  • Year and Date: 2010-07-26
• [Presentation] Role of Grain Boundaries in Mechanical Properties of Bulk Nanostructured Metals (2010)
  • Author(s): Nobuhiro Tsuji
  • Organizer: Int.Conf.on Intergranular and Interphase Boundaries in Materials (iib 2010)
  • Place of Presentation: 鳥羽(招待講演)
  • Year and Date: 2010-07-02
• [Presentation] バルクナノメタルの特異な力学特性と組織 (2010)
  • Author(s): 辻伸泰
  • Organizer: 日本金属学会・鉄鋼協会中四国支部
  • Place of Presentation: 岡山理科大学(招待講演)
  • Year and Date: 2010-06-18
• [Book] 鉄の事典 (2014)
  • Author(s): 辻 伸泰
  • Total Pages: 1000
  • Publisher: 朝倉書店
• [Book] “In situ Studies with Photons, Neutrons and Electron Scattering”, Editor: T.Kannengiesser, S.S.Babu, Y.Komizo and A.J.Ramire “In situ observations of microstructural evolution during annealing or deformation in an electro-deposited fine-grained iron” (2014)
  • Author(s): Y.H. Su, Y. Tomota, S. Harjo, J. Suzuki, Y. Adachi
  • Publisher: Springer
• [Book] Advanced Materials in Automotive Engineering (2012)
  • Author(s): Y. Okitsu
  • Total Pages: 800
  • Publisher: Woodhead Publishers, Cambridge, UK
• [Book] New Methods of Damage and Failure Analysis of Structural Parts (2012)
  • Author(s): S.Yamasaki
  • Total Pages: 650
  • Publisher: Vydavatelstv#237; V#352;B-TU Ostrava, Ostrava, Czech Republic
• [Book] Nanostructured Metals and Alloys : Processing, microstructure, mechanical properties and applications (2011)
  • Author(s): N.Tsuji
  • Total Pages: 840
  • Publisher: Woodhead Publishing Ltd
• [Book] 「鉄鋼材料の加工硬化特性への新たな要求と基礎研究-加工硬化研究の最前線」第1章加工硬化基礎 (2011)
  • Author(s): 辻伸泰
  • Total Pages: 8
  • Publisher: (社)日本鉄鋼協会
• [Book] Advanced Steels The Recent Scenario in Steel Science and Technology (2011)
  • Author(s): N.Tsuji
  • Total Pages: 511
  • Publisher: Springer-Verlag Berlin Heidelberg and Metallurgical Industry Press
• [Book] Nanostructured Metals and Alloys : Processing, microstructure, mechanical properties and applications (2011)
  • Author(s): Edited by Sung H.Whang Chapter 2 : N.Tsuji
  • Total Pages: 840
  • Publisher: oodhead Publishing Ltd., Oxford-Cambridge-Philadelphia-New Delhi
• [Remarks] バルクナノメタル ～常識を覆す新しい構造材料の科学
  • URL: http://www.bnm.mtl.kyoto-u.ac.jp
• [Remarks] バルクナノメタル ～常識を覆す新しい構造材料の科学
  • URL: http://www.bnm.mtl.kyoto-u.ac.jp
• [Remarks] バルクナノメタル ～常識を覆す新しい構造材料の科学
  • URL: http://www.bnm.mtl.kyoto-u.ac.jp
• [Remarks] Local energy and local stress from
  • URL: http://iopscience.iop.org/0953-8984/labtalk-article/54070
• [Remarks]
  • URL: http://www.bnm.mtl.kyoto-u.ac.jp/
• [Remarks]
  • URL: http://www.bnm.mtl.kyoto-u.ac.jp/
• [Patent(Industrial Property Rights)] 金属材料及び金属材料の製造方法 (2013)
  • Inventor(s): 飴山惠、山口理、S・クマール バジパイ、S・チ ョンチャロエン
  • Industrial Property Rights Holder: 学校法人立命館
  • Industrial Property Rights Type: 特許
  • Industrial Property Number: 2013-180022
  • Filing Date: 2013-08-30
• [Funded Workshop] The 2nd International Workshop on Bulk Nanostructure Metals (2015)
  • Place of Presentation: 京都大学楽友会館
  • Year and Date: 2015-08-03