Physical and Numerical Simulations on the Formation of Bulk-nanostructured Metals

• Project Area: Bulk Nanostructured Metals -New Metallurgy of Novel Structural Materials
• Project/Area Number: 22102005
• Research Category: Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
• Allocation Type: Single-year Grants
• Review Section: Science and Engineering
• Research Institution: The University of Tokyo
• Principal Investigator: YANAGIMOTO Jun 東京大学, 生産技術研究所, 教授 (90220194)
• Co-Investigator(Kenkyū-buntansha): INOUE Tadanobu 独立行政法人物質, 材料研究機構・元素戦略材料センター, グループリーダー (90354274) ; TSUCHIDA Noriyuki 兵庫県立大学, 工学研究科, 准教授 (90382259) ; YANAGIDA Akira 東京電機大学, 工学部, 准教授 (20432065)
• Project Period (FY): 2010-04-01 – 2015-03-31
• Project Status: Completed (Fiscal Year 2014)
• Budget Amount: ¥165,230,000 (Direct Cost: ¥127,100,000、Indirect Cost: ¥38,130,000); Fiscal Year 2014: ¥26,000,000 (Direct Cost: ¥20,000,000、Indirect Cost: ¥6,000,000); Fiscal Year 2013: ¥28,340,000 (Direct Cost: ¥21,800,000、Indirect Cost: ¥6,540,000); Fiscal Year 2012: ¥31,850,000 (Direct Cost: ¥24,500,000、Indirect Cost: ¥7,350,000); Fiscal Year 2011: ¥42,640,000 (Direct Cost: ¥32,800,000、Indirect Cost: ¥9,840,000); Fiscal Year 2010: ¥36,400,000 (Direct Cost: ¥28,000,000、Indirect Cost: ¥8,400,000)
• Keywords: 金属組織制御 / ナノ構造 / バルク材料 / 強ひずみ加工 / 材料強度 / 数値シミュレーション / 物理シミュレーション / 材料試験

Outline of Final Research Achievements

Knowledge on the effect of the degree of deformation and deformation mode to the formation of bulk-nanostructured metal is essential for the understanding of the mechanism on the formation of bulk-nanostructured metals. This research revealed the formation of bulk-nanostructure metals through thermos-mechanical processing including transformation and the kinetic properties of formed metal by physical and numerical simulations.

Research Products

• [Journal Article] Cold Formability of AZ31 Wrought Magnesium Alloy Undergoing Semisolid Spheroidization Treatment (2015)
  • Author(s): Y.Meng, S. Fukushima, S.Sugiyama and J.Yanagimoto
  • Journal Title: Materials Science and Engineering Volume: Vol.624 Pages: 148-156
  • DOI: 10.1016/j.msea.2014.11.083
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Separation Technology of Tramp Elements in Aluminium Alloy Scrap by Semisolid Processing (2015)
  • Author(s): Thet Thet Cho, Y. Meng, S. Sugiyama and J. Yanagimoto
  • Journal Title: International Journal of Precision Engineering and Manufacturing Volume: Vol. 16 Issue: 1 Pages: 177-183
  • DOI: 10.1007/s12541-015-0023-3
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Effect of Strain Rate on True Stress-True Strain Relationship of Ultrafine-grained Ferrite-Cementite Steels up to the Plastic Deformation Limit (2015)
  • Author(s): N.Tsuchida, H.Nakano, T.Okamoto and T.Inoue
  • Journal Title: Mater. Sci. Eng Volume: A, 626 Pages: 441-448
  • DOI: 10.1016/j.msea.2014.12.080
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Effects of Forming Conditions on Homogeneity of Microstructure and Mechanical Properties of A6061 Aluminum Alloy Manufactured by Time-Dependent Rheoforging on a Mechanical Servo Press (2014)
  • Author(s): Y.Meng, S.Sugiyama, J.Tan and J.Yanagimoto
  • Journal Title: Journal of Materials Processing Technology Volume: Vol.214 Issue: 12 Pages: 3037-3047
  • DOI: 10.1016/j.jmatprotec.2014.07.014
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Microstructure of Cr–V–Mo Steel Processed by Recrystallization and Partial Melting and Its Effect on Mechanical Properties (2014)
  • Author(s): Y.Meng, S.Sugiyama and J.Yanagimoto
  • Journal Title: MATERIALS TRANSACTIONS Volume: 55 Issue: 6 Pages: 921-929
  • DOI: 10.2320/matertrans.M2013398
  • NAID: 130004455316
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Refinement of Cast Cr-V-Mo Steel by Using Recrystallization and Partial Melting Method and Post Heat Treatments (2014)
  • Author(s): Y.Meng, S.Sugiyama and J.Yanagimoto
  • Journal Title: Procedia Engineering Volume: Vol.81 Pages: 1571-1576
  • DOI: 10.1016/j.proeng.2014.10.192
  • Peer Reviewed / Acknowledgement Compliant
• [Journal Article] Influence of Carbon Content on Toughening in Ultrafine Elongated Grain Structure Steels (2014)
  • Author(s): 木村勇次、井上忠信
  • Journal Title: Tetsu-to-Hagane Volume: 100 Issue: 9 Pages: 1104-1113
  • DOI: 10.2355/tetsutohagane.100.1104
  • NAID: 130004685495
  • ISSN: 0021-1575, 1883-2954
  • Peer Reviewed / Open Access / Acknowledgement Compliant
• [Journal Article] Advanced Researches on Ultrafine-grained Metals by Plastic Deformation (2014)
  • Author(s): 井上忠信
  • Journal Title: Journal of the Japan Society for Technology of Plasticity Volume: 55 Issue: 647 Pages: 1063-1067
  • DOI: 10.9773/sosei.55.1063
  • NAID: 130004787534
  • ISSN: 0038-1586, 1882-0166
  • Peer Reviewed / Open Access
• [Journal Article] Stress-Strain Curves of Steels (2014)
  • Author(s): 土田紀之、ステファヌス・ハルヨ、大貫貴久、友田 陽
  • Journal Title: Tetsu-to-Hagane Volume: 100 Issue: 10 Pages: 1191-1206
  • DOI: 10.2355/tetsutohagane.100.1191
  • NAID: 130004696826
  • ISSN: 0021-1575, 1883-2954
  • Peer Reviewed / Open Access
• [Journal Article] Effects of Temperature and Strain Rate on Tensile Properties in a Lean Duplex Stainless Steel (2013)
  • Author(s): N.Tsuchida, T.Kawahata, E.Ishimaru and A.Takahashi
  • Journal Title: Tetsu-to-Hagane Volume: 99 Issue: 8 Pages: 517-523
  • DOI: 10.2355/tetsutohagane.99.517
  • NAID: 130003372557
  • ISSN: 0021-1575, 1883-2954
  • Peer Reviewed / Open Access / Acknowledgement Compliant
• [Journal Article] Numerical Simulation of Ultrafine Grain Generation in Super Short Interval Multi-pass Rolling Process (2013)
  • Author(s): S. Fukushim, K. Miyata, M. Etou A. Yanagida, J. Yanagimoto
  • Journal Title: Journal of the Japan Society for Technology of Plasticity Volume: 54 Pages: 148-152
  • NAID: 10031139523
  • Peer Reviewed
• [Journal Article] Controlled Semisolid Forging of Aluminium Alloys Using Mechanical Servo Press to Manufacture Products with Homo- and Heterogeneous Microstructures (2013)
  • Author(s): J. Yanagimoto, Jian-Bo Tan, S. Sugiyama, Y. Meng
  • Journal Title: MATERIALS TRANSACTIONS Volume: 54 Issue: 7 Pages: 1149-1154
  • DOI: 10.2320/matertrans.M2013098
  • NAID: 10031183660
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Cross-Sectional Distributions of Mechanical Properties of Fine Cu–Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending (2013)
  • Author(s): J. Tokutomi, K. Hanazaki, N. Tsuji, J. Yanagimoto
  • Journal Title: MATERIALS TRANSACTIONS Volume: 54 Issue: 9 Pages: 1634-1641
  • DOI: 10.2320/matertrans.MH201323
  • NAID: 10031194648
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Experiments on and Finite Element Analyses of the Tilting of Fine Steel Wire in Roller Die Drawing (2013)
  • Author(s): M. Asakawa, H. Shigeta, A. Shimizu, I. Tirtom, J. Yanagimoto
  • Journal Title: ISIJ International Volume: 53 Issue: 10 Pages: 1850-1857
  • DOI: 10.2355/isijinternational.53.1850
  • NAID: 130003383810
  • ISSN: 0915-1559, 1347-5460
  • Peer Reviewed
• [Journal Article] Effects of Heat Treatment on Microstructure and Mechanical Properties of Cr-Effects of Heat Treatment on Microstructure and Mechanical Properties of Cr-V-Mo Steel Processed by Recrystallization and Partial Melting Method (2013)
  • Author(s): Y. Meng, S. Sugiyama , J. Yanagimoto
  • Journal Title: Journal of Materials Processing Technology Volume: 214 Issue: 01 Pages: 87-96
  • DOI: 10.4149/km_2013_1_83
  • Peer Reviewed
• [Journal Article] Finite element simulation of accumulative roll-bonding process (2013)
  • Author(s): T. Inoue, A. Yanagida, J. Yanagimoto
  • Journal Title: Materials Letters Volume: 106 Pages: 37-40
  • DOI: 10.1016/j.matlet.2013.04.093
  • Peer Reviewed
• [Journal Article] Effect of initial notch orientation on fracture toughness in fail-safe steel (2013)
  • Author(s): T. Inoue, A. Yanagida, J. Yanagimoto
  • Journal Title: Journal of Materials Ssience Volume: 48 Issue: 13 Pages: 4766-4772
  • DOI: 10.1007/s10853-012-6874-4
  • Peer Reviewed
• [Journal Article] Delaminating Crack Paths in Ultrafine, Elongated Ferritic Steel (2013)
  • Author(s): C. Wang, Q. Hai, T. Inoue
  • Journal Title: ISIJ International Volume: 53 Issue: 12 Pages: 2272-2274
  • DOI: 10.2355/isijinternational.53.2272
  • NAID: 130003392822
  • ISSN: 0915-1559, 1347-5460
  • Peer Reviewed
• [Journal Article] 超微細粒組織を活用した低炭素鋼の強靭化 (2013)
  • Author(s): 井上忠信、木村勇次
  • Journal Title: 日本機械学会論文集A編 Volume: 79 Pages: 1226-1238
  • NAID: 130003374713
  • Peer Reviewed
• [Journal Article] Effect of Ferrite Grain Size on Estimated True Stress-True Strain Relationships up to the Plastic Deformation Limit in Low Carbon Ferrite-Cementite Steels (2013)
  • Author(s): N.Tsuchida, T.Inoue and H.Nakano
  • Journal Title: Journal of Materials Research Volume: 28 Issue: 16 Pages: 2171-2179
  • DOI: 10.1557/jmr.2013.221
  • Peer Reviewed
• [Journal Article] Effects of Temperature and Strain Rate on TRIP Effect in SUS301L Metastable Austenitic Stainless Steel (2013)
  • Author(s): N.Tsuchida, Y.Yamaguchi, Y.Takagi, R.Ueji
  • Journal Title: ISIJ International Volume: 53 Issue: 10 Pages: 1881-1887
  • DOI: 10.2355/isijinternational.53.1881
  • NAID: 130003383814
  • ISSN: 0915-1559, 1347-5460
  • Peer Reviewed
• [Journal Article] Role of Stress-induced Martensitic Transformation in TRIP Effect of Metastable Austenitic Steels (2013)
  • Author(s): N.Tsuchida, S.Kawabata, K.Fukaura , R.Ueji
  • Journal Title: J. Alloys and Compounds Volume: 577(Supplement 1) Pages: S525-S527
  • DOI: 10.1016/j.jallcom.2011.11.071
  • Peer Reviewed
• [Journal Article] 0.2C-1.2Si-1.5Mn鋼のTRIP効果におよぼすひずみ速度の影響 (2013)
  • Author(s): 土田紀之、尾﨑渓香
  • Journal Title: 鉄と鋼 Volume: 99 Pages: 524-531
  • Peer Reviewed
• [Journal Article] Effects of Predeformation and Semi-solid Processing on Microstructure and Mechanical Properties of Cr-V-Mo Steel (2013)
  • Author(s): Y. Meng
  • Journal Title: Journal of Materials Processing Technology Volume: 213 Issue: 3 Pages: 426-433
  • DOI: 10.1016/j.jmatprotec.2012.09.021
  • Peer Reviewed
• [Journal Article] Microstructural Evolution during RAP Process and Deformation Behavior of Semi-Solid SKD61 Tool Steel (2012)
  • Author(s): Y. Meng
  • Journal Title: Journal of Materials Processing Technology Volume: 212 Issue: 8 Pages: 1731-1741
  • DOI: 10.1016/j.jmatprotec.2012.04.003
  • Peer Reviewed
• [Journal Article] Change in Mechanical Properties of Fine Copper Wire Manufactured by Continuous Rotary Draw Bending Process (2012)
  • Author(s): J. Tokutomi
  • Journal Title: Journal of Materials Processing Technology Volume: 212 Issue: 11 Pages: 2505-2513
  • DOI: 10.1016/j.jmatprotec.2012.06.008
  • Peer Reviewed
• [Journal Article] Shape effect of ultrafine-grained structure on static fracture toughness in low-alloy steel (2012)
  • Author(s): T.Inoue, Y.Kimura, S.Ochiai
  • Journal Title: Science and Technology of Advanced Materials Volume: 13 Issue: 3 Pages: 035005-035005
  • DOI: 10.1088/1468-6996/13/3/035005
  • Peer Reviewed
• [Journal Article] 様々な金属材料を用いた断続引張試験とBridgmanの式による破断直前までの真の応力-ひずみ関係の推算 (2012)
  • Author(s): 土田紀之
  • Journal Title: J. Japan Inst. Metals Volume: 76 Pages: 579-586
  • NAID: 10031121207
  • Peer Reviewed
• [Journal Article] Simulation of Texture Evolution during ECAE Using Crystal Plasticity Finite Element Method with Representative Element (2012)
  • Author(s): A. Yanagida
  • Journal Title: Steel Research International Special Issue Volume: ICTP2012 Pages: 1127-1130
  • Peer Reviewed
• [Journal Article] Interrupt Shearing Test for Evaluating Effect of Large Shear Deformation on Evolution of Microstructure into Ultrafine Grains (2012)
  • Author(s): J.Yanagimoto, S.Sugiyama, S.Kawando, A.Yanagida
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 2-7
  • DOI: 10.2320/matertrans.MD201119
  • NAID: 130004454840
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu–Sn Alloy Manufactured by Continuous Draw Bending (2012)
  • Author(s): J.Tokutomi, K.Hanazaki, N.Tsuji, I.Yanagimoto
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 116-122
  • DOI: 10.2320/matertrans.MD201114
  • NAID: 130004454828
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Significant Change in Mechanical Properties of Deep Drawn Ultrafine Grained Copper Wire by Additional Deformation (2012)
  • Author(s): K.Hanazaki, J.Tokutomi, J.Yanagimoto, N.Tsuji
  • Journal Title: Materials Science and Engineering A Volume: VOL.534 Pages: 720-723
  • Peer Reviewed
• [Journal Article] Estimations of the True Stress and True Strain until Just before Fracture by the Stepwise Tensile Test and Bridgman Equation for Various Metals and Alloys (2012)
  • Author(s): N.Tsuchida, T.Inoue, K.Enami
  • Journal Title: MATERIALS TRANSACTIONS Volume: 53 Issue: 1 Pages: 133-139
  • DOI: 10.2320/matertrans.MD201112
  • NAID: 130004454816
  • ISSN: 1345-9678, 1347-5320
  • Peer Reviewed
• [Journal Article] Ferrite Transformation Kinetics of Severely Hot-Deformed Austenite (2012)
  • Author(s): A.Yanagida, J.Liu, J.Yanagimoto
  • Journal Title: Materials Science Forum Volume: VOL.706-709 Pages: 1562-1567
  • Peer Reviewed
• [Journal Article] Continuous Bending-Drawing Process to Manufacture the Ultrafine Copper Wire with Excellent Electrical and Mechanical Pronperties (2011)
  • Author(s): J.Yanagimoto, J.Tokutomi, K.Hanazaki, N.Tsuji
  • Journal Title: CIRP Annals Manufacturing Technology Volume: 60 Issue: 1 Pages: 279-282
  • DOI: 10.1016/j.cirp.2011.03.148
  • Peer Reviewed
• [Journal Article] Static fracture toughness of fail-safe steel (2011)
  • Author(s): T.Inoue, Y.Kimura, S.Ochiai
  • Journal Title: SCRIPTA MATERIALIA Volume: VOL.65 Issue: 6 Pages: 552-555
  • DOI: 10.1016/j.scriptamat.2011.06.025
  • Peer Reviewed
• [Journal Article] Dual-Phase鋼の応力-ひずみ曲線におよぼす温度とひずか速度の影響とKocks-Meckingモデルによる定式化 (2011)
  • Author(s): 土田紀之、井崎栄政、田中知幸、深浦健三
  • Journal Title: 鉄と鋼 Volume: 97巻 Pages: 201-208
  • Peer Reviewed
• [Journal Article] Static Tensile Deformation Behaviors of an Fe-30Mn-3Al-3Si TWIP Steel studied by in-situ Neutron Diffraction (2011)
  • Author(s): N.Tsuchida, R.Ueji, F.Yin, Y.Tomota
  • Journal Title: Journal of Iron and Steel Research International Volume: VOL.18 Pages: 178-182
  • Peer Reviewed
• [Journal Article] 準安定オーステナイト糸ステンレス鋼SUS301LのTRIP効果におよぼすひずみ速度の影響 (2011)
  • Author(s): 高木勝規、上路林太郎、水口隆、土田紀之
  • Journal Title: 鉄と鋼 Volume: 97巻 Pages: 450-456
  • Peer Reviewed
• [Journal Article] 加工プロセスによる組織微細化と材料の強靭化 (2011)
  • Author(s): 井上忠信、木村勇次
  • Journal Title: 金属 Volume: 81巻 Pages: 641-648
  • Peer Reviewed
• [Journal Article] 強靭性材料に関する研究～強くて壊れにくいフェールセーフ鋼を目指して～ (2011)
  • Author(s): 井上忠信、木村勇次
  • Journal Title: MATERIAL STAGE Volume: 11巻 Pages: 58-61
  • Peer Reviewed
• [Journal Article] Bending-Drawing Process to Manufacture the Ultrafine Copper Wire with Excellent Electrical and Mechanical Properties (2011)
  • Author(s): J.Yanagimoto, J.Tokutomi, K.Hanazaki, N.Tsuji
  • Journal Title: Annals of the CIRP manufacturing technology Volume: 60-1(in press(掲載確定))
  • Peer Reviewed
• [Journal Article] Stress-Induced Martensitic Transformation Behaviors at Various Temperatures and Their TRIP Effects in SUS304 Metastable Austenitic Stainless Steel (2011)
  • Author(s): N.Tsuchida, Y.Morimoto, T.Tonan, Y.Shibata, K.Fukaura, R.Ueji
  • Journal Title: ISIJ International Volume: 51 Pages: 124-129
  • NAID: 10028268949
  • Peer Reviewed
• [Journal Article] Effect of Ti Addition on Tensile Properties of C-Mn Steels Subjected to ECAE and Heat Treatment (2010)
  • Author(s): A.Yanagida, K.Okazaki, K.Ishikawa, A.Azushima
  • Journal Title: Steel Research International Volume: 81 Pages: 462-465
  • Peer Reviewed
• [Presentation] Microstructure Evolution of Carbon Steel by Hot Equal Channel Angular Extrusion (2014)
  • Author(s): A. Yanagida, R. Aoki, S. Ishikawa and M. Kobayashi
  • Organizer: ICTP 2014
  • Place of Presentation: Nagoya Congress Center
  • Year and Date: 2014-10-19 – 2014-10-24
• [Presentation] 熱間強せん断変形および圧縮変形によるミクロ・ナノ組織変化の物理シミュレーション (2014)
  • Author(s): 林 ジン諭、杉山澄雄、柳本 潤
  • Organizer: 第65回塑性加工連合講演会
  • Place of Presentation: 岡山大学 津島キャンパス
  • Year and Date: 2014-10-11 – 2014-10-13
• [Presentation] Purification of Aluminium Alloy by Semisolid Processing (2014)
  • Author(s): Thet Thet Cho、杉山澄雄、柳本 潤
  • Organizer: 第65回塑性加工連合講演会
  • Place of Presentation: 岡山大学 津島キャンパス
  • Year and Date: 2014-10-11 – 2014-10-13
• [Presentation] 超微細フェライト-セメンタイト鋼の真応力-ひずみ関係におよぼすひずみ速度の影響 (2014)
  • Author(s): 中野晴香、岡本拓也、土田紀之、井上忠信
  • Organizer: 日本鉄鋼協会第168回秋季講演大会
  • Place of Presentation: 名古屋大学
  • Year and Date: 2014-09-24 – 2014-09-26
• [Presentation] 超微細フェライト-セメンタイト鋼の塑性加工限界までの真応力-ひずみ関係におよぼすセメンタイト体積率の影響 (2014)
  • Author(s): 上野秀平、土田紀之、鳥塚史郎、井上忠信
  • Organizer: 日本鉄鋼協会第168回秋季講演大会
  • Place of Presentation: 名古屋大学
  • Year and Date: 2014-09-24 – 2014-09-26
• [Presentation] Effects of Post Heat Treatment on Microstructure and Mechanical Properties of RAP-Processed Cr-V-Mo Steel (2014)
  • Author(s): Y. Meng, S.Sugiyama and J.Yanagimoto
  • Organizer: 13th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2014)
  • Place of Presentation: The German University of Technology in Oman
  • Year and Date: 2014-09-15 – 2014-09-17
• [Presentation] フェールセーフ設計された材料の強靭化（第３報 1800MPaクラス級低合金鋼の強度，靭性の異方性） (2014)
  • Author(s): 井上忠信、木村勇次
  • Organizer: 日本機械学会M&M2014材料力学カンファレンス
  • Place of Presentation: 福島大学
  • Year and Date: 2014-07-19 – 2014-07-21
• [Presentation] Purification and Densification of Aluminium Alloy Scraps by using the Backward Extrusion Method in Semisolid Processing (2014)
  • Author(s): Thet Thet Cho、杉山澄雄、柳本 潤
  • Organizer: 平成26年度塑性加工春季講演会
  • Place of Presentation: 研究交流センター つくば国際会議場
  • Year and Date: 2014-06-06 – 2014-06-08
• [Presentation] マルチパス熱間ECAE加工による低炭素鋼の特性変化 (2014)
  • Author(s): 青木 亮、小林 正尭、柳田 明
  • Organizer: 塑性加工春季講演会
  • Place of Presentation: つくば国際会議場
  • Year and Date: 2014-06-06 – 2014-06-08
• [Presentation] 温間テンプフォームで作製した超微細繊維状結晶粒組織鋼の遅れ破壊特性 (2014)
  • Author(s): 木村勇次、井上忠信
  • Organizer: 第77回日本熱処理技術協会講演大会
  • Place of Presentation: 東工大
  • Year and Date: 2014-06-02 – 2014-06-03
• [Presentation] 超微細低炭素鋼の強靭化 (2013)
  • Author(s): 井上忠信
  • Organizer: 日本金属学会2013年秋期（第153回）講演大会,日本金属学会
  • Place of Presentation: 金沢大学
  • Invited
• [Presentation] 棒圧延による微細粒金属材料の創成と今後の展開 (2013)
  • Author(s): 井上忠信
  • Organizer: 第75回伸線技術分科会,日本塑性加工学会
  • Place of Presentation: 関西大学
  • Invited
• [Presentation] 高プロ・凝固組織形成フォーラム、創形創質 (2013)
  • Author(s): 井上忠信
  • Organizer: 板工学フォーラム合同講演会, 日本鉄鋼協会
  • Place of Presentation: 東京電機大学
  • Invited
• [Presentation] Observation on the Crack Propagation in Ferritic Steel with Ultrafine, Elongated Grain Structures (2013)
  • Author(s): T.Inoue
  • Organizer: Proceedings of the 9th International Conference on Fracture & Strength of Solids (FEOFS2013)
  • Place of Presentation: Ramada Hotel in Jeju Island, Korea
• [Presentation] Effect of Ferrite Grain Size on Local Elongation in a Low Carbon Steel (2013)
  • Author(s): T.Inoue
  • Organizer: Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-8)
  • Place of Presentation: Hilton Waikoloa Village, Waikoloa, Hawaii
• [Presentation] Neutron Diffraction Measurement during Stress Induced Phase Transformation (2013)
  • Author(s): N.Tsuchida
  • Organizer: THERMEC2013
  • Place of Presentation: Las Vegas U.S.A.
• [Presentation] 強せん断変形による内部組織変化の物理シミュレーション（第4報） (2013)
  • Author(s): J. Lin
  • Organizer: 平成25年度塑性加工春季講演会
  • Place of Presentation: ウインクあいち・大同大学
• [Presentation] 強せん断変形によるバルクナノメタル創製の物理シミュレーション (2013)
  • Author(s): J. Lin
  • Organizer: 日本金属学会2013年度秋期大会
  • Place of Presentation: 京都大学
• [Presentation] RAP処理したCr-V-Mo鋼の組織と機械的性質に及ぼす熱間塑性加工の影響 (2013)
  • Author(s): 孟 毅
  • Organizer: 第64回塑性加工連合講演会
  • Place of Presentation: 大阪大学 吹田キャンパス
• [Presentation] 熱間強せん断変形および圧縮変形によるミクロ・ナノ組織変化の物理シミュレーション (2013)
  • Author(s): J. Lin
  • Organizer: 第64回塑性加工連合講演会
  • Place of Presentation: 大阪大学 吹田キャンパス
• [Presentation] フェールセーフ設計された材料の強靭化（第２報 1800MPaクラス級低合金鋼の強度―衝撃特性バランス） (2013)
  • Author(s): 井上忠信
  • Organizer: M&M2013材料力学カンファレンス
  • Place of Presentation: 岐阜大学
• [Presentation] 結晶粒の形態と方位を制御した強靭な低合金鋼の破壊挙動解明 (2013)
  • Author(s): 井上忠信
  • Organizer: 信頼性・破壊力学合同シンポジウム
  • Place of Presentation: 阿蘇ファームランド
• [Presentation] フェライト-セメンタイト鋼の塑性加工限界までの真応力-ひずみ関係におよぼすセメンタイト体積率とフェライト粒径の影響 (2013)
  • Author(s): 上野秀平
  • Organizer: 日本鉄鋼協会・日本金属学会 関西支部 材料開発研究会 ポスターセッション
  • Place of Presentation: 関西大学
• [Presentation] SUS316L鋼の引張特性におよぼす試験温度の影響とTRIP/TWIP効果 (2013)
  • Author(s): 富田光希
  • Organizer: 日本鉄鋼協会・日本金属学会 関西支部 材料開発研究会 ポスターセッション
  • Place of Presentation: 関西大学
• [Presentation] 強加工による鉄鋼材料の微細粒化 (2013)
  • Author(s): 柳田 明
  • Organizer: 第53回塑性加工フォーラム
  • Place of Presentation: 東京電機大学 東京千住キャンパス
• [Presentation] 炭素量の異なる超微細フェライト-セメンタイト鋼の静的引張特性と塑性加工限界 (2012)
  • Author(s): 上野秀平
  • Organizer: 日本鉄鋼協会・日本金属学会 関西支部 材料開発研究会ポスターセッション（優秀プレゼンテーション賞受賞）
  • Place of Presentation: 関西大学
  • Year and Date: 2012-12-21
• [Presentation] 炭素鋼より作製したフェライト-セメンタイト鋼の局所伸びにおよぼす結晶粒径の影響 (2012)
  • Author(s): 中野晴香
  • Organizer: 日本鉄鋼協会・日本金属学会 関西支部 材料開発研究会 ポスターセッション
  • Place of Presentation: 関西大学
  • Year and Date: 2012-12-21
• [Presentation] オーステナイト鋼の塑性加工限界までの真応力-ひずみ関係におよぼす強化機構の影響 (2012)
  • Author(s): 三好崇夫
  • Organizer: 日本鉄鋼協会・日本金属学会 関西支部 材料開発研究会 ポスターセッション
  • Place of Presentation: 関西大学
  • Year and Date: 2012-12-21
• [Presentation] 溝ロール圧延による微細粒鋼創成とその破壊特性 (2012)
  • Author(s): 井上忠信
  • Organizer: (社)日本塑性加工学会 圧延工学分科会 第112回研究会
  • Place of Presentation: 物質・材料研究機構 千現エリア
  • Year and Date: 2012-11-29
  • Invited
• [Presentation] Influence of Subsequent Heat Treatment on Microstructure and Mechanical Properties of RAP-Processed Cr-V-Mo Steel (2012)
  • Author(s): Y. Meng
  • Organizer: The Proceeding of the 63nd Japanese Joint Conference for the Technology of Plasticity
  • Place of Presentation: Kitakyushu, JAPAN
  • Year and Date: 2012-11-04
• [Presentation] 超微細フェライト―セメンタイト組織鋼のシャルピー衝撃特性 (2012)
  • Author(s): 井上忠信
  • Organizer: 第63回塑性加工連合講演会
  • Place of Presentation: Kitakyushu, JAPAN
  • Year and Date: 2012-11-04
• [Presentation] 熱間ECAE加工による低炭素鋼の組織変化(マルチスケールシミュレーションのための基礎データの確立 - 3 ) (2012)
  • Author(s): 柳田 明
  • Organizer: 第63回塑性加工連合講演会
  • Place of Presentation: Kitakyushu, JAPAN
  • Year and Date: 2012-11-04
• [Presentation] Effect of Recrystallization and Partial Melting Method on Microstructural Evolution of SKD61 Tool Steel in Semi-solid State (2012)
  • Author(s): Y. Meng
  • Organizer: Solid State Phenomena, Vol. 192-193, pp.209-214.
  • Place of Presentation: Cape Town，South Africa
  • Year and Date: 2012-10-08
• [Presentation] 加工ひずみ制御によるバルクナノメタル創製の有限要素シミュレーション －ARB加工によるひずみの定量化（第１報）－ (2012)
  • Author(s): 井上忠信
  • Organizer: 日本金属学会2012年度秋期大会
  • Place of Presentation: 愛媛大学
  • Year and Date: 2012-09-17
• [Presentation] 省資源型二相ステンレス鋼の静的引張特性と中性子線・放射光実験による考察 (2012)
  • Author(s): 土田紀之
  • Organizer: 日本鉄鋼協会第164回秋季講演大会
  • Place of Presentation: 愛媛大学
  • Year and Date: 2012-09-17
• [Presentation] 結晶塑性有限要素法によるECAE加工時の集合組織発展予測 (2012)
  • Author(s): 柳田 明
  • Organizer: 日本機械学会2012年度年次大会
  • Place of Presentation: 金沢市
  • Year and Date: 2012-09-09
• [Presentation] Physical and Numerical Simulation for Evaluating the Effect of Large Shear Deformation on the Evolution of Microstructure (2012)
  • Author(s): J. Yanagimoto
  • Organizer: Proceedings of the International Workshop on Bulk Nanostructured Metals, pp.21-25
  • Place of Presentation: Kyoto, JAPAN
  • Year and Date: 2012-06-26
  • Invited
• [Presentation] Effect of Carbon Content on Estimated True Stress-True Strain Relationships up until the Plastic Deformation Limit in Ultrafine-Grained Ferrite-Cementite Steels (2012)
  • Author(s): N.Tsuchida
  • Organizer: Proceedings of International Workshop on Bulk Nanostructured Metals, p.93-96
  • Place of Presentation: Kyoto, JAPAN
  • Year and Date: 2012-06-26
• [Presentation] Simulation of Texture Evolution during Equal Cannel Angular Extrusion Using Crystal Plasticity Finite Element Method (2012)
  • Author(s): A. Yanagida
  • Organizer: Proceedings of International Workshop on Bulk Nanostructured Metals, pp. 89-92
  • Place of Presentation: Kyoto, JAPAN
  • Year and Date: 2012-06-26
• [Presentation] Physical Simulation on the Effect of Large Shear Deformation on the Evolution of Microstructure (2012)
  • Author(s): J. Yanagimoto
  • Organizer: The Proceedings of the 2012 Japanese Spring Conference for the Technology of Plasticity
  • Place of Presentation: Komatsu, JAPAN
  • Year and Date: 2012-06-07
• [Presentation] Influence of Heating Strategies of RAP Method on Microstructure and Mechanical Properties of Semi-Solid SKD61 Tool Steel (2012)
  • Author(s): Y. Meng
  • Organizer: The Proceedings of the 2012 Japanese Spring Conference for the Technology of Plasticity
  • Place of Presentation: Komatsu, JAPAN
  • Year and Date: 2012-06-07
• [Presentation] Parameter Optimization for Ultrafine Grain Formation by Computational Simulation (2012)
  • Author(s): T. Ismail
  • Organizer: The Proceeding of the 63nd Japanese Joint Conference for the Technology of Plasticity
  • Place of Presentation: Kitakyushu, JAPAN
  • Year and Date: 2012-06-07
• [Presentation] The Cross-sectional Distributions of Mechanical Properties of the Fine Copper Wire Manufactured by Continuous Rotary Draw Bending Process (2012)
  • Author(s): J. Tokutomi
  • Organizer: The Proceeding of the 63nd Japanese Joint Conference for the Technology of Plasticity
  • Place of Presentation: Kitakyushu, JAPAN
  • Year and Date: 2012-06-07
• [Presentation] バルクナノメタルの塑性変形限界に至るまでの真の応力-ひずみ関係 (2011)
  • Author(s): 土田紀之
  • Organizer: 日本金属学会2011年秋期講演大会
  • Place of Presentation: 沖縄カルチャーリゾートフェストーネ(沖縄県)(招待講演)
  • Year and Date: 2011-11-08
• [Presentation] Physical Simulation on the Effect of Large Shear Deformation on the Evolution of Microstruchure (2011)
  • Author(s): J.Yanagimoto, S.Kawanao, H.Mao
  • Organizer: The Proceeding of the 62nd Japanese Joint Conference for the Technology of Plasticity
  • Place of Presentation: ホテル日航豊橋(愛知県)
  • Year and Date: 2011-10-29
• [Presentation] 代表要素を用いた結晶塑性有限要素法によるECAE加工集合組織解析(マルチスケールシミュレーションための基礎データの確立-1) (2011)
  • Author(s): 柳田明、小豆島明
  • Organizer: 62回塑性加工連合講演会
  • Place of Presentation: ホテル日航豊橋(愛知県)
  • Year and Date: 2011-10-27
• [Presentation] フリーモーションECAE加工装置の提案と開発(マルチスケールシミュレーションための基礎データの確立-2) (2011)
  • Author(s): 柳田明
  • Organizer: 62回塑性加工連合講演会
  • Place of Presentation: ホテル日航豊橋(愛知県)
  • Year and Date: 2011-10-27
• [Presentation] Groove Design for Efficiently Creating Ultrafine-grained Steel Bar by Finite Element Simulation (2011)
  • Author(s): T.Inoue
  • Organizer: Proc.10th International Conference on Technology of Plasticity
  • Place of Presentation: Aachen, Germany
  • Year and Date: 2011-09-28
• [Presentation] Simulation for Microstructural Evolution and Deformation Resistance of Nb Microalloyed Steels during Hot Rolling (2011)
  • Author(s): M.Kihara, K.Ohara, J.Yanagimoto
  • Organizer: Steel Research International Special Edition : 10th International Conference on Technology of Plasticity
  • Place of Presentation: Aachen, Germany
  • Year and Date: 2011-09-26
• [Presentation] その場中性子回折実験による省資源型二相ステンレス鋼の静的引張特性の考察 (2011)
  • Author(s): 河畑太治、土田紀之、石丸詠一朗、高橋明彦
  • Organizer: 日本鉄鋼協会第162回秋季講演大会学生ポスターセッション
  • Place of Presentation: 大阪大学吹田キャンパス(大阪府)
  • Year and Date: 2011-09-20
• [Presentation] Role of Stress-Induced Martensitic Transformation in TRIP Effect of Metastable Austenitic Steels (2011)
  • Author(s): N.Tsuchida, S.Kawabata, K.Fukaura, R.Ueji
  • Organizer: International Conference on Martensitic transformations (ICOMAT2011)
  • Place of Presentation: 千里阪急ホテル(大阪府)
  • Year and Date: 2011-09-05
• [Presentation] Ferrite Transformation Kinetics of Severely Hot-Deformed Austenite (2011)
  • Author(s): A.Yanagida, T.Liu, J.Yanagimoto
  • Organizer: International Conference on Process and Manufacturing of Advanced Materials
  • Place of Presentation: Quebec City, Canada(Invited)
  • Year and Date: 2011-08-04
• [Presentation] Physical Simulation on the Evolution of Microstructure after Severe Shear Deformation (2011)
  • Author(s): J.Yanagimoto, S.Kawando
  • Organizer: Collected Abstracts of 2011 Autumn Meeting of The Japan Institute of Metals
  • Place of Presentation: 沖縄コンベンションセンター(沖縄県)
  • Year and Date: 2011-07-09
• [Presentation] Physical Simulation on the Effect of Large Shear Deformation on The Evolution of Microstructure (2011)
  • Author(s): J.Yanagimoto, S.Sugiyama, S.Kawando
  • Organizer: The Proceedings of The 2011 Japanese Spring Conference for The Technology of Plasticity
  • Place of Presentation: 早稲田大学西早稲田キャンパス(東京都)
  • Year and Date: 2011-05-29
• [Presentation] その場中性回折実験による省資源型二相ステンレス鋼の静的引張特性の考察 (2010)
  • Author(s): 河畑太治、土田紀之、石丸詠一朗
  • Organizer: 日本鉄鋼協会・日本金属学会関西支部 材料開発研究会 学生ポスターセッション
  • Place of Presentation: 大阪大学
  • Year and Date: 2010-12-14
• [Presentation] 準安定オーステナイト鋼のTRIP効果に及ぼすNi当量の影響 (2010)
  • Author(s): 川端沙耶、土田紀之、深浦健三
  • Organizer: 日本鉄鋼協会・日本金属学会関西支部 材料開発研究会 学生ポスターセッション
  • Place of Presentation: 大阪大学
  • Year and Date: 2010-12-14
• [Presentation] Optimum Pass Design of Bar Rolling for Producing Bulk Ultrafine-grained Steel by Numerical Simulation (2010)
  • Author(s): T.Inoue
  • Organizer: Materials Science Forum on The 7th Pacific Rim International Conference on Advanced Materials and Processing(PRICM 7)
  • Place of Presentation: Cairns, Australia
  • Year and Date: 2010-08-03
• [Presentation] Macro-micro Combined Texture Evolution Model for Hot Strip with High Reduction Rolling (2010)
  • Author(s): T.Morimoto, J.Yanagimoto, F.Yoshida, Y.Kasumoto, O.Akisue
  • Organizer: Proceeding of the 10th International Conference on Steel Rolling
  • Place of Presentation: Beijing, China
• [Presentation] Material Data for the Analysis of Microstructural Evolution in the Hot Forming of SKD61 Steel (2010)
  • Author(s): M.Soltanpour, J.Yanagimoto
  • Organizer: The Proceeding of the 61th Japanese Joint Conference for the Technology of Plasticity
  • Place of Presentation: Yamagata, Japan
• [Presentation] 超微細繊維状結晶粒組織を有する低炭素鋼の衝撃特性 (2010)
  • Author(s): 井上忠信、木村勇次、殷福星、津崎兼彰、落合庄治郎
  • Organizer: 第23回計算力学講演会
  • Place of Presentation: 北見工業大学
• [Book] 強くて壊れにくい“強靭鋼”の開発 (2012)
  • Author(s): 井上忠信
  • Total Pages: 4
  • Publisher: MATERIAL STAGE Vol.12 (2012), No.6, pp.58-61
• [Book] しくみ図解『金属加工が一番わかる』製造業の基礎が身につく金属加工の方法 (2011)
  • Author(s): 井上忠信
  • Publisher: 技術評論社
• [Book] "Finite element analysis", Editor : David Moratal, SCIYO, Croatia, (2010), pp.589-610. Chapter 24 :"Strain Variations on Rolling Condition in Accumulative Roll-bonding by Finite Element Analysis" (2010)
  • Author(s): T.Inoue
  • Total Pages: 688
  • Publisher: SCIYO, Croatia.