| Project/Area Number |
01460107
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
機械要素
|
|---|
| Research Institution | Tokyo Institute of Technology |
|---|
Principal Investigator |
TSUKADA Tadao Tokyo Institute of Technology, Faculty of Engineering, Professor, 工学部, 教授 (00016437)
|
|---|
| Project Period (FY) |
1989 – 1990
|
| Project Status |
Completed (Fiscal Year 1990)
|
| Budget Amount *help |
¥6,100,000 (Direct Cost: ¥6,100,000)
Fiscal Year 1990: ¥1,700,000 (Direct Cost: ¥1,700,000)
Fiscal Year 1989: ¥4,400,000 (Direct Cost: ¥4,400,000)
|
|---|
| Keywords | Spline function / Free-surface / From / Measurement / Three-dimensional measurement |
|---|
| Research Abstract |
This research program aimed to develop the measuring instrument for free-surface and data processing system of massive form-data. The main results are as follows.
(1) Development of Three-Dimensional From Measuring System
The developed system consists of three-dimensional instrument, control device and computer system. The stylus to measure free-surface are set automatically. The table to set specimen is supported by air-bearings and positioned in accuracy of 0.1mum.
The orientation of specimen is corrected by Fuzzyーcontrol program. This Fuzzy-control program is executed by in-process. By this process, the preparatory plan is very simplified.
(2) Development of Algorithm to Compress Massive Data of Free-Surface
The measured data have noise signals and errors caused by discrete data. To remote these errors, this project developed the new algorithm to fit the three-dimensional spline function by optimization method. From this method, the data quantity to reproduce a free-surface is reduced to 40-60% of measured data quantity.
|
