| Project/Area Number |
04045013
|
|---|
| Research Category |
Grant-in-Aid for international Scientific Research
|
| Allocation Type | Single-year Grants |
|---|
| Section | University-to-University Cooperative Research |
|---|
| Research Institution | Tohoku University |
|---|
Principal Investigator |
KATO Masana Faculty of Engineering, Tohoku University, Professor, 工学部, 教授 (60005262)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
秦 大同 重慶大学, 機械伝動国家重点実験室, 助教授
韋 雲隆 重慶大学, 機械伝動国家重点実験室, 教授
張 光輝 重慶大学, 機械伝動国家重点実験室, 教授
雷 聞宇 重慶大学, 工学院, 教授
とう 鋼 (〓 鋼) 東北大学, 工学部, 助手 (90237040)
SHIBATA Katsuhisa Faculty of Engineering, Tohoku University, Research Associate, 工学部, 助手 (20196421)
INOUE Katsumi Faculty of Engineering, Tohoku University, Associate Professor, 工学部, 助教授 (90005554)
QIN Datong Stat Key Lab of Mechanical Transmission, Chongqing, Associate Professor
WEI Yunlong Stat key Lab of Mechanical Transmission, Chongqing University, Professor
ZHANG Guanghui Stat Key Lab of Mechanical Transmission, Chongqing University, Professor
DENG Gang Faculty of Engineering, Tohoku University, Research Associate
LEI Wenyu School of Engineering, Chongqing University, Professor
こう 道香 重慶大学, 機械伝動国家重点実験室, 講師
廖 小雲 重慶大学, 機械伝動国家重点実験室, 助手
石 曉輝 重慶大学, 機械伝動国家重点実験室, 講師
曹 興進 重慶大学, 機械伝動国家重点実験室, 講師
雷 雲宇 重慶大学, 工学院, 教授
|
|---|
| Project Period (FY) |
1992 – 1994
|
| Project Status |
Completed (Fiscal Year 1994)
|
| Budget Amount *help |
¥8,500,000 (Direct Cost: ¥8,500,000)
Fiscal Year 1994: ¥2,700,000 (Direct Cost: ¥2,700,000)
Fiscal Year 1993: ¥2,900,000 (Direct Cost: ¥2,900,000)
Fiscal Year 1992: ¥2,900,000 (Direct Cost: ¥2,900,000)
|
|---|
| Keywords | Gear / Worm Gearing / Bevel Gear / Power Transmission / Contact Problem / Fatigue / Load Carrying Capacity / Assembly Interference / Fracture Mechanics / Vibration |
|---|
| Research Abstract |
This cooperative project deals with a wide range of basic researches of power transmission and gearing. The satisfactory results are obtained in these three years under the efforts by many researchers of Tohoku University of Japan and Chongqing University of China, and the academic exchanges and friendship of the scholars of two countries are promoted as well. The research topics are summarized briefly below.
1) Load Carrying Capacity of Hourglass worm Gearing
The loaded contact situations of worm gearing are examined considering the profile precision and assembly errors. A measurement method for tooth profile of worm and wheel is presented, and a new kind of hourglass worm gearing with a higher load carrying capacity is developed to have a local surface contact condition.
2) Interference Problems in Spiral Bevel Gears
The phenomena of interference in the spiral bevel gears are analyzed. A computer code for justifying if the interference occurs or not is developed, which is helpful in gear
… More
dimension design.
3) The Strength Evaluation Based Fracture Mechanics
A new tooth bending strength evaluation method is presented based on fracture mechanics. The effects of surface conditions such as roughness, machining flaws, non-martensitic layr and shot-peening to the bending strength become possible to be evaluated with the initial crack length. The bending strength can be determined by comparing the limit of initial crack lenght with the threshold crack length, which is a function of hardness.
4) Lubrication of Gearing
The scoring resistance of gearing is evaluated with the initial temperature which is a main composite of the flash temperature index. The definition of the initial temperature is made clear and an experimental formula for the initial temperature is presented.
5) The Vibration of Gear Box
The sound radiation of a single stage gear box was described. The radiated sound power was measured with sound intensity method and calculated by Boundary Element Method. This research makes it possible to estimate the sound radiation of a gear box in designing procedure. Less
|
