| Project/Area Number |
04555058
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
機械力学・制御工学
|
|---|
| Research Institution | GIFU NATIONAL COLLEGE OF TECHNOLOGY |
|---|
Principal Investigator |
INABA Seiki GIFU NATIONAL COLLEGE OF TECHNOLOGY,ASSOCIATE PROFESSOR, 電気工学科, 助教授 (30110183)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
HANE Kazuhiro TOHOKU UNIVERSITY,FACULTY OF ENGINEERING,PROFESSOR, 工学部, 教授 (50164893)
奥田 健一 岐阜工業高等専門学校, 電気工学科, 助手 (10214058)
|
|---|
| Project Period (FY) |
1992 – 1994
|
| Project Status |
Completed (Fiscal Year 1994)
|
| Budget Amount *help |
¥2,100,000 (Direct Cost: ¥2,100,000)
Fiscal Year 1994: ¥400,000 (Direct Cost: ¥400,000)
Fiscal Year 1993: ¥600,000 (Direct Cost: ¥600,000)
Fiscal Year 1992: ¥1,100,000 (Direct Cost: ¥1,100,000)
|
|---|
| Keywords | Micromachining / Microsensor / Optical Sensor / Optical Fiber / Laser Diode / Photothermal Effect / Microcantilever / Liquid Density |
|---|
| Research Abstract |
In order to develop an optical sensor for liquid density, following studies have been carried out.
1) Resonance characteristics of a microcantilever vibrated photothermally was observed in water first. The resonance frequency decreased considerably compared with that in vacuum because of the reaction force from water. The theoretical analysis on resonance frequency was also performed.
2) It was cleared experimentally and theoretically that the resonance frequency depended on the liquid density.
3) The resonance sharpness Q in liquid was rather smaller than that in vacuum because of the viscosity drag force from liquid. It was believed than the optical sensing for liquid viscosity was possible using the photothermal vibration in liquid.
4) It was very difficult to irradiate the microcantilever in liquid efficiently with the near-infrared radiation of the laser diode. In order to develop the practical sensors, the microcantilever which was attaced directly to an optical fiber was fabricated from a quartz core by etching a clad layr from the fiber tip. Optical systems were very simple compared with previous ones, and stable resonance characteristics were obtained.
|
