| Project/Area Number |
06452159
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
機械工作・生産工学
|
|---|
| Research Institution | Nagoya University |
|---|
Principal Investigator |
YAMAUCHI Katsumi Nagoya University, School of Engineering, Professor, 工学部, 教授 (40023056)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
NAKAMOTO Takeshi Nagoya University, School of Engineering, Associate Professor, 工学部, 講師 (30198262)
|
|---|
| Project Period (FY) |
1994 – 1995
|
| Project Status |
Completed (Fiscal Year 1995)
|
| Budget Amount *help |
¥7,500,000 (Direct Cost: ¥7,500,000)
Fiscal Year 1995: ¥1,400,000 (Direct Cost: ¥1,400,000)
Fiscal Year 1994: ¥6,100,000 (Direct Cost: ¥6,100,000)
|
|---|
| Keywords | Micro Part / UV Photopolymer / Focused Laser Beam / High Aspect Ratio / Three Dimensional Part / Beam Writing / Absorption of Light |
|---|
| Research Abstract |
This research work deals with the development of a simple and practical method for manufacturing micro mechanical parts. In this method, high aspect ratio (height/width) polymer structures and stacked three dimensional polymer structures are produced using a direct focused UV laser beam writing on the surface of liquid photopolymer. The irradiated portion of the photopolymer is solidified and it becomes a polymer structure. At first, the solidified shapes of the polymer are examined both theoretically and experimentally. Next, the optimum conditions to produce high aspect ratio and stacked three dimensional micro polymer structures are verified. At last, examples of structures are produced by using these conditions such as micro gear and micro bent pipe.
|
