| Project/Area Number |
07555027
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (A)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 試験 |
|---|
| Research Field |
Materials/Mechanics of materials
|
|---|
| Research Institution | Tokyo institute of technology |
|---|
Principal Investigator |
SHIBUYA Toshikazu Tokyo Institute of Technology, Faculty of Eng., Professor, 工学部, 教授 (60016417)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
NOTOMI Mitsuo Tokyo Institute of Technology, Faculty of Eng., Associate Rese., 工学部, 助手 (70218288)
INOUE Hirotsugu Tokyo Institute of Technology, Faculty of Eng., Associate Prof., 工学部, 助教授 (90193606)
KAWAKAMI Takashi Toshiba CO., Research center, Chief researcher, 研究開発センター, 主任研究員
KISHIMOTO Kikuo Tokyo Institute of Technology, Faculty of Eng., Professor, 工学部, 教授 (30111652)
|
|---|
| Project Period (FY) |
1995 – 1996
|
| Project Status |
Completed (Fiscal Year 1996)
|
| Budget Amount *help |
¥9,000,000 (Direct Cost: ¥9,000,000)
Fiscal Year 1996: ¥4,000,000 (Direct Cost: ¥4,000,000)
Fiscal Year 1995: ¥5,000,000 (Direct Cost: ¥5,000,000)
|
|---|
| Keywords | Contact stress problem / Intelligent adided system / Design / Network / Database |
|---|
| Research Abstract |
The intelligent aided system for the estimation of contact stress on designing a machine is developed. This system can be used by a man who design the machine has the contact parts, e.g.bearing, gear and connecting pipe. This system is based on the information of analytical contact stress which is investigated by this researchers and includes the intelligent database of several kinds of contact conditions. the parts of this system are as follows ; (1) the network application : this part plays the role making the open system on the Internet. (2) the engine of contact stress analysis : this part processes the contact stress analysis. Because we may use the mathematical equation processing software, the system becomes sophisticated. (3) the database : this part reserves the information of our contact stress invstigations. (4) the linker application : this part connects the each parts. CGI is used between the network application and the engine of contact stress analysis and between the network application and the database. The Applescript is applied for the control of contacting between other parts. (5) the front-end interface : this part plays the role to ocnnect a user to this system. This part is constructed using the Hypertext format. Thus, it is convenient to access the documents using the Internet. Furthermore, this system can be opened on the Internet and easily used by a designer even if he is not an expert.
|
