• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

DEVELOPMENT OF IN SITU ELECTRIC MEASUREMENT OF VULCANIZAION OF RUBBER

Research Project

Project/Area Number 08555175
Research Category

Grant-in-Aid for Scientific Research (B)

Allocation TypeSingle-year Grants
Section試験
Research Field Material processing/treatments
Research InstitutionKURUNE NATIONAL COLLEGE OF TECHNOLOGY

Principal Investigator

MORI Tetsuo  KURUNE NATIONAL COLLEGE OF TECHNOLOGY,DEPARTMENT OF INDUSTRIAL CHEMISTRY PROFESSOR, 工業化学科, 教授 (10037963)

Co-Investigator(Kenkyū-buntansha) TSUDA Yusuke  KURUME NATIONAL COLLEGE OF TECHNOLOGY,DEPARTMENT OF INDUSTRIAL CHEMISTRY ASSOCIA, 工業化学科, 助教授 (30270367)
TOH Michiharu  KURUNE NATIONAL COLLEGE OF TECHNOLOGY,DEPARTMENT OF INDUSTRIAL CHEMISTRY PROFESS, 工業化学科, 教授 (70037927)
Project Period (FY) 1996
Project Status Completed (Fiscal Year 1996)
Budget Amount *help
¥2,300,000 (Direct Cost: ¥2,300,000)
Fiscal Year 1996: ¥2,300,000 (Direct Cost: ¥2,300,000)
KeywordsRubber / Vulcanization / Cure Curve / Dielectric Loss Tangent / Cure Meter
Research Abstract

Vulcanization of NBR rubber was carried out in a compression mold equipped with two electrodes for the electric measurement. Progress of vulcanization at the temperature of 130゚, 140゚, 150゚, 160゚ and 170゚C was followed by the measurement of dielectric loss tangent (tandelta) and electric current applying alternating voltage.
Both of the tandelta and electric current-cure time curves showed a striking resemblance to the torque-cure time curve, which is widely used as a cure curve. That is, the time when the vulcanization is complete (t_<100>) and the apparent activation energy for vulcanization (E_a) obtained from the temperature dependence of t_<100> agreed with those from torquecure time curves obtained by a conventional rheometer.
Tandelta and electric current for the NBR composites without sulfur and accelerators increased gradually with time.
The cure time dependence of effective crosslink density showed good correlation with tandelta, electric current-cure time curves.
The result of electric measurement was discussed considering the rebber coumpounds as dielectric compounds comprised of parallel circuit of condenser (C) and resitance (R).

Report

(2 results)
  • 1996 Annual Research Report   Final Research Report Summary
  • Research Products

    (6 results)

All Other

All Publications (6 results)

  • [Publications] 権藤豊彦: "誘電正接および電流測定による加硫の進行状態のin situ測定" 日本ゴム協会誌. 69巻10号. 708-710 (1996)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1996 Final Research Report Summary
  • [Publications] 権藤豊彦: "ゴムの加硫過程の電気的即時測定" 高分子論文集. 54巻5号. (1997)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1996 Final Research Report Summary
  • [Publications] Toyohiko GONDOH,Tetsuo MORI,Michiharu TOH,Satoko FUJIE,Daisaburo OKAI: "In Situ Dielectric Loss Tangent and Electric Current Measurement of Vulcanization Process" Nippon Gomu Kyokaishi. Vol.69. 708-710 (1996)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1996 Final Research Report Summary
  • [Publications] Toyohiko GONDOH,Seiji ETOH,Yukiko MATSUOKA,Michiharu TOH,Tetsuo MORI,Daisaburo OKAI: "In Situ Electric Mearsurement of Vulcanization Process of Rubber" Kobunshi Ronbunshu. Vol.54 (in press). (1997)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1996 Final Research Report Summary
  • [Publications] 権藤豊彦: "誘電正接および電流測定による加硫の進行状態のin situ測定" 日本ゴム協会誌. 69巻10号. 708-710 (1996)

    • Related Report
      1996 Annual Research Report
  • [Publications] 権藤豊彦: "ゴムの加硫過程の電気的即時測定" 高分子論文集. 54巻5号. (1997)

    • Related Report
      1996 Annual Research Report

URL: 

Published: 1996-04-01   Modified: 2016-04-21  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi