| Project/Area Number |
08650528
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
土木材料・力学一般
|
|---|
| Research Institution | YOKOHAMA NATIONAL UNIVERSITY |
|---|
Principal Investigator |
TSUBAKI Tatsuya Yokohama National University, Faculty of Engineering, Professor, 工学部, 教授 (40134902)
|
|---|
| Project Period (FY) |
1996 – 1997
|
| Project Status |
Completed (Fiscal Year 1997)
|
| Budget Amount *help |
¥2,300,000 (Direct Cost: ¥2,300,000)
Fiscal Year 1997: ¥1,000,000 (Direct Cost: ¥1,000,000)
Fiscal Year 1996: ¥1,300,000 (Direct Cost: ¥1,300,000)
|
|---|
| Keywords | Steel Fiber Renforced Concrete / mechanical Property / Structural Analysis / Constitutive Law / Parallel Computation / Modeling |
|---|
| Research Abstract |
In case of modeling the constitutive relationship of fiber reinforced material, it is imporant to know the nonlinear bond behavior between fiber and matrix. The objective of this study is to obtain basic data to develop a general constitutive relationship based on the bond behavior of each steel fiber embedded in high strength steel fiber reinforced concrete (SFRC). The summary of this study is shown as follows.
1. Experiment on deformational property of SFRC :
The behavior of steel fiber subject to uniaxial tension and shear was investigated with fiber type (straight, hooked and anchored fibers) and fiber angle (0,30,45,60 degrees) as parameters. The effect of fiber type and fiber angle on the force-displacement relationship was clarified.
2. Modeling of deformational property of steel fiber :
The force-displacement relationships of steel fiber under uniaxial tension and shear were modeled by the multilinear model.
3. Development of simulation method for fiber reinforced material :
It was confirmed that an analysis method suitable for parallel computation can be developed by combining the simulation method using microstructural unit elements with the domain decomposition method.
|
