• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Thermodynamic Database for Alloy Semiconductor Systems.

Research Project

Project/Area Number 09044124
Research Category

Grant-in-Aid for international Scientific Research

Allocation TypeSingle-year Grants
SectionJoint Research
Research Field Structural/Functional materials
Research InstitutionTohoku University

Principal Investigator

ISHIDA Kiyohito  Grad.School of Eng., Dept.of Materials Sci., Professor, 大学院・工学研究科, 教授 (20151368)

Co-Investigator(Kenkyū-buntansha) HILLERT Mats  スウェーデン王立工科大学, 名誉教授
ANSARA Ibrah  仏国ドメイン大学, 化学熱力学研究所, 所長
OHNUMA Ikuo  Grad.School of Eng., Dept.of Materials Sci., Research Associate, 大学院・工学研究科, 助手 (20250714)
OHTANI Hiroshi  Center for Interdisciplinary Research, Associate Professor, 学際科学研究センター, 助教授 (70176923)
KAINUMA Ryosuke  Grad.School of Eng., Dept.of Materials Sci., Associate Professor, 大学院・工学研究科, 助教授 (20202004)
IBRAHIM Nicolas Ansara  Thermodynamic Lab., Domaine Univ., Head of Lab.
MATS Hillert  Dept.of Materials Sci.& Eng., The Royal Institute of Technology, Professor emeri
Project Period (FY) 1997 – 1998
Project Status Completed (Fiscal Year 1998)
Budget Amount *help
¥4,900,000 (Direct Cost: ¥4,900,000)
Fiscal Year 1998: ¥2,400,000 (Direct Cost: ¥2,400,000)
Fiscal Year 1997: ¥2,500,000 (Direct Cost: ¥2,500,000)
KeywordsIII-V compound semiconductor / phase diagram / thermodynamic database / opto-electronics / liquid phase epitaxy / vapor phase epitaxy / phase equilibria / strain energy / CALPHAD
Research Abstract

III-V compound semiconductors (III=AI, Ga, In : V=P, As, Sb) have various outstanding properties which can not be obtained by Si semiconductor. Furthermore, mixture of these compounds which is called as III-V crystal alloy semiconductor gives possibilities to control its physical properties arbitrarily such as the band gap energy and the lattice constant by its composition. Therefore, III-V crystal alloy semiconductors are of great significance for opto-electronics and high-speed devices. In order to realize the desirable properties, i.e., to create the crystal alloy with appropriate composition by Liquid Phase Epitaxy (LPE) method under the condition of near phase equilibria, phase diagrams are indispensable for controlling their microstructures and compositions. However, it was reported that a thin epitaxial layer on a substrate exhibited completely different phase equilibria from those of bulk materials, for instance, deviation of equilibrium composition, formation of unexpected pha … More ses and so on. In this research, thermodynamic analysis on the phase equilibria of III-V crystal alloy semiconductor was carried out based on the thermodynamic data and experimental results. Then, thermodynamic database has been established for calculating the phase equilibria of both bulk and thin layer materials.
Gibbs energies of the liquid phase and the compound are described by the sub-regular solution approximation and the two-sublattice model respectively. The strain energy was taken into account for calculating the stability of a thin epitaxial layer grown on a substrate.
Thermodynamic parameters of eleven ternary systems have been evaluated and thermodynamic database for III-V alloy semiconductors has been constructed with or without taking account of a strain energy between a epitaxial layer and a substrate. The effect of the strain energy which is caused from the epitaxy between a crystal layer and a substrate can be seen, for instance, when a GaAs-GaSb crystal alloy is grown epitaxially on the (100) plane of lnP substrate. According to the result of calculations, unexpected homogeneous phase appears when its thickness is him and its composition is 5 lmol% GaAs which corresponds to the lattice matching composition. This is in good agreement with the experimental result of LPE by Quillec et al. The results of calculations for various combinations between thin layers and substrates show that phase stability of an epitaxial layer depends on the lattice constant and the crystal orientation of the substrate and on the thickness of the epitaxial layer. Less

Report

(3 results)
  • 1998 Annual Research Report   Final Research Report Summary
  • 1997 Annual Research Report
  • Research Products

    (8 results)

All Other

All Publications (8 results)

  • [Publications] H.Ohtani: "Application of the CALPHAD method to materials design." Thermochimica Acta. 3598. 207-216 (1997)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] H.Ohtani: "Computational Materials Design" Springer-Verlag(発表予定), (1999)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] H.Ohtani: "Application of the CALPHAD method to materials design." Thermochimica Acta. 3598. 207-216 (1997)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] H.Ohtani: "CALPHAD Approach to Materials Design." Computational Materials Design.(Springer-Verlag). (in press). (1999)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] H.Ohtani: "Application of the CALPHAD method to materials design." Thermochimica Acta. 3598. 207-216 (1997)

    • Related Report
      1998 Annual Research Report
  • [Publications] H.Ohtani: "Computational Materials Design" Spinger-Verlag(発表予定), (1999)

    • Related Report
      1998 Annual Research Report
  • [Publications] H. Ohtani: "Application of the CALPHAD method to material design" Thermo chimica Acta. 3598. 207-216 (1997)

    • Related Report
      1997 Annual Research Report
  • [Publications] H. Ohtani: "Computational Materials Design" Springer-Verlag(発表予定), (1998)

    • Related Report
      1997 Annual Research Report

URL: 

Published: 1997-04-01   Modified: 2016-04-21  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi