• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Study of manufacturing system to flexibly suit aged workers' skill and health

Research Project

Project/Area Number 09650150
Research Category

Grant-in-Aid for Scientific Research (C)

Allocation TypeSingle-year Grants
Section一般
Research Field 機械工作・生産工学
Research InstitutionSETSUNAN UNIVERSITY

Principal Investigator

KAWANO Tsuneo  SETSUNAN UNIVERSITY,Industrial and Systems Engineering, Associate Professor, 工学部, 助教授 (90152983)

Co-Investigator(Kenkyū-buntansha) HASHIMOTO H  SETSUNAN UNIVERSITY,Mechanical Engineering, Associate Professor, 工学部, 助教授 (60180840)
NISHIDA Shuzo  SETSUNAN UNIVERSITY,Industrial and Systems Engineering, Professor, 工学部, 教授 (20100563)
Project Period (FY) 1997 – 1998
Project Status Completed (Fiscal Year 1998)
Budget Amount *help
¥3,300,000 (Direct Cost: ¥3,300,000)
Fiscal Year 1998: ¥1,100,000 (Direct Cost: ¥1,100,000)
Fiscal Year 1997: ¥2,200,000 (Direct Cost: ¥2,200,000)
Keywordsaged worker / technical skill / health / somatometry / physical load / physiological burden / mental burden / manufacturing system
Research Abstract

The purpose of the study is to establish a design methodology of the manufacturing system to flexibly suit aged workers' skill and health. First, their characteristics were surveyed, secondly, some experiments were carried out to establish the evaluation methods for the skill and health. The results are as follows :
(1)As a result of an experiment in the material handling conducted for fifty five elderly male and female subjects including young people, the physical functions were declined due to aging, but the increase in the technical skill was seen at the middle age.
(2)Human body dynamography to visualize the human body joint torque and a human interface to manipulate the computer manikin were developed for the individual evaluation of muscloskeletal load.
(3)Vital reactions in blood pressure, EMG, and breath pattern were measured in typing operation and microscopic task. It was found that the physiological time series data trended to be stable along with learning.
(4)Fatigue in work operations, physiological burden, and mental burden were chosen as the factors which hurted the health. As a result of some experiments in heavy work with hand and mental work, skin blood flow on the tip of thumb and blood pressure were found to change depending on the factors.
(5)Skin blood flow was taken as an index of health, and an experiment was carried out to investigate the relationship between skin blood flow and work operation. As a result, it was found that expanding and constructing motion of elbow joint with angular acceleration raised skin blood flow efficiently.
The results of the study give many hints to the concept for design methods of manufacturing system to flexibly suit aged workers' skill and health.

Report

(3 results)
  • 1998 Annual Research Report   Final Research Report Summary
  • 1997 Annual Research Report
  • Research Products

    (41 results)

All Other

All Publications (41 results)

  • [Publications] 西田修三ほか: "マイクロマシンの遠隔操作における移動タスクと人間の空間認知モデル形成に関する研究" 精密工学会誌. 64. 221-225 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫: "高齢者に優しい生産システムの現状と動向" CIM化情報. 69. 1-2 (1997)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫: "技術・技能の伝承の現状と問題点" 機械の研究. 51. 7-15 (1999)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫: "高齢化社会における生産システムの諸問題" 日本機械学会. No.97 46〜56. 16-23 (1997)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫ほか: "工具を把持した上肢動的作業負荷の評価に関する研究(第2報)-皮膚血流量と作業負荷の関連-" 1997年度精密工学会秋季大会講演論文集. 1. 157 (1997)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 西田修三ほか: "生体反応の変化から見た作業熟達過程の解明に関する研究" 1997年度精密工学会秋季大会講演論文集. 1. 160 (1997)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫ほか: "工具を把持した上肢動的作業負荷の評価に関する研究(第3報)-客観的評価の一手法-" 1998年度精密工学会春季大会講演論文集. 1. 582 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 西田修三ほか: "微細作業シミュレータによる作業熟達過程の解明に関する研究" 1998年度精密工学会春季大会講演論文集. 1. 581 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫: "技術・技能の伝承と高齢化問題" 日本機械学会講演論文集. No.948-1. 9-23-9-24 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫ほか: "コンピュータマネキンのための人体骨格型入力装置の開発" 精密工学会1998年度関西地方講演論文集. 1. 79-80 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫ほか: "健康指向型作業設計に関する研究-運動の速度・加速度と皮膚血流量の関連-" 1998年度精密工学会秋季大会講演論文集. 1. 404 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 西田修三ほか: "微細作業シミュレータによる微細作業分析と作業時間" 1998年度精密工学会秋季大会講演論文集. 1. 403 (1998)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫ほか: "工具を把持した上肢動的作業負荷の評価に関する研究(第4報)-皮膚血流のバリエーションによる評価-" 1999年度精密工学会春季大会講演論文集. 1. (1999)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 川野常夫: "技術・技能伝承の現状と課題" 日本機械学会関西支部講演論文集. 1. (1999)

    • Description
      「研究成果報告書概要(和文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Shuzo NISHIDA,Tsuneo KAWANO,Masaharu HASHIMOTO et al: "Guiding Tasks and Formation of Cognitive Models of Space Configuration in Remote Control of a Micromachine" Journal of the Japan Society for Precision Engineering. Vol.64, No.2. 221-225 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Tsuneo KAWANO: "Current Status and Some Problems of Skill and Technique Tradition" Science of Machine. Vol.51, No.1. 7-15 (1999)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Tsuneo KAWANO: "Problems of Manufacturing System" The Japan Society of Mechanical Engineers. No.97-46-56. 16-23 (1997)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Tsuneo KAWANO,Shuzo NISHIDA,Masaharu HASHIMOTO et al: "Evaluation of Dynamic Work Load at Arm during Work with Hand Tool (2nd Report) -Relationship between Skin Blood Flow and Work Load-" Autumn Meeting of the Japan Society for Precision Engineering in 1997. 157 (1997)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Tsuneo KAWANO,Shuzo NISHIDA,Masaharu HASHIMOTO et al: "Evaluation of Dynamic Work Load at Arm during Work with Hand Tool (3nd Report) -An Objective Evaluation Method-" Spring Meeting of the Japan Society for Precision Engineering in 1998. 528 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Shuzo NISHIDA,Tsuneo KAWANO,Masaharu HASHIMOTO et al: "Study of Technical Skill Learning Processes in Micro-Manipulation using Simulator" Spring Meeting of the Japan Society for Precision Engineering in 1998. 581 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] Tsuneo KAWANO,shuzo NISHIDA,Masaharu HASHIMOTO et al.: "Study of Health Oriented Work Design-Relationship between Motion Velocity/Acceleration and Skin Blood Flow-" Antumn Meeting of the Japan Society for Precision Engineering in 1998. 404 (1998)

    • Description
      「研究成果報告書概要(欧文)」より
    • Related Report
      1998 Final Research Report Summary
  • [Publications] 西田修三ほか: "マイクロマシンの遠隔操作における移動タスクと人間の空間認知モデル形成に関する研究" 精密工学会誌. 64. 221-225 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫: "高齢者に優しい生産システムの現状と動向" CIM化情報. 69. 1-2 (1997)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫: "技術・技能の伝承の現状と問題点" 機械の研究. 51. 7-15 (1999)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫: "高齢化社会における生産システムの諸問題" 日本機械学会. No.97,46〜56. 16-23 (1997)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫ほか: "工具を把持した上肢動的作業負荷の評価に関する研究(第2報)-皮膚血流量と作業負荷の関連-" 1997年度精密工学会秋季大会講演論文集. 1. 157 (1997)

    • Related Report
      1998 Annual Research Report
  • [Publications] 西田修三ほか: "生体反応の変化から見た作業熟達過程の解明に関する研究" 1997年度精密工学会秋季大会講演論文集. 1. 160 (1997)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫ほか: "工具を把持した上肢動的作業負荷の評価に関する研究(第3報)-客観的評価の一手法-" 1998年度精密工学会春季大会講演論文集. 1. 582 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 西田修三ほか: "微細作業シミュレータによる作業熟達過程の解明に関する研究" 1998年度精密工学会春季大会講演論文集. 1. 581 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫: "技術・技能の伝承と高齢化問題" 日本機械学会講演論文集. No.948-1. 9-23-9-24 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫ほか: "コンピュータマネキンのための人体骨格型入力装置の開発" 精密工学会1998年度関西地方講演論文集. 1. 79-80 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫ほか: "健康指向型作業設計に関する研究-運動の速度・加速度と皮膚血流量の関連-" 1998年度精密工学会秋季大会講演論文集. 1. 404 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 西田修三ほか: "微細作業シミュレータによる微細作業分析と作業時間" 1998年度精密工学会秋季大会講演論文集. 1. 403 (1998)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫ほか: "工具を把持した上肢動的作業負荷の評価に関する研究(第4報)-皮膚血流のバソモーションによる評価-" 1999年度精密工学会春季大会講演論文集. 1. (1999)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫: "技術・技能伝承の現状と課題" 日本機械学会関西支部講演論文集. 1. (1999)

    • Related Report
      1998 Annual Research Report
  • [Publications] 川野常夫: "工具を把持した上肢動的作業負荷の評価に関する研究(第2報)" 1997年度精密工学会秋季大会学術講演会講演論文集. 1. p.157 (1997)

    • Related Report
      1997 Annual Research Report
  • [Publications] 西田修三: "生体反応の変化から見た作業熟達過程の解明に関する研究" 1997年度精密工学会秋季大会学術講演会講演論文集. 1. p.160 (1997)

    • Related Report
      1997 Annual Research Report
  • [Publications] 橋本正治: "イリュージョンコントロールを用いた位置覚ディスプレイに関する研究" 1997年度精密工学会秋季大会学術講演会講演論文集. 1. p.156 (1997)

    • Related Report
      1997 Annual Research Report
  • [Publications] 川野常夫: "工具を把持した上肢動的作業負荷の評価に関する研究(第3報)" 1998年度精密工学会春季大会学術講演会講演論文集. 1. (1998)

    • Related Report
      1997 Annual Research Report
  • [Publications] 西田修三: "微細作業シミュレータによる作業熟達過程の解明に関する研究" 1998年度精密工学会春季大会学術講演会講演論文集. 1. (1998)

    • Related Report
      1997 Annual Research Report
  • [Publications] 川野常夫: "技術・技能の伝承と高齢化問題" 日本機械学会関西支部第73期定時総会講演会論文集. 1. (1998)

    • Related Report
      1997 Annual Research Report

URL: 

Published: 1997-04-01   Modified: 2016-04-21  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi