| Project/Area Number |
10044173
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B).
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
社会システム工学
|
|---|
| Research Institution | Ashikaga Institute of Technology |
|---|
Principal Investigator |
YOKOTA Takao (1999-2000) Ashikaga Institute of Tech., School of Engg., Professor, 工学部, 教授 (70048916)
玄 光男 (1998) 足利工業大学, 工学部, 教授 (20095003)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MURATA Tadahiko Ashikaga Institute of Tech., School of Engg., Assistant Professor, 工学部, 講師 (30296082)
TSUJIMURA Yasuhiro Ashikaga Institute of Tech., School of Engg., Associate Professor, 工学部, 助教授 (80240977)
GEN Mitsuo Ashikaga Institute of Tech., School of Engg., Professor, 工学部, 教授 (20095003)
IDA Kenichi Maebashi Institute of Tech., School of Engg., Professor, 工学部, 教授 (60137700)
YAMAZAKI Genji Tokyo Metropolitan Institute of Tech., School of Engg., Professor, 工学部, 教授 (80100387)
横田 孝雄 足利工業大学, 工学部, 教授 (70048916)
WOLFF Ronald カリフォルニア大学バークレ校, 工学部, 教授
OREN Samuel カリフォルニア大学バークレ校, 工学部, 教授
SUER Gursel プエルトリコ大学, 工学部, 助教授
VAZQUEZ Ramo プエルトリコ大学, 工学部, 教授
NORMAN Bryan ピッツバーグ大学, 工学部, 講師
SMITH Alice ピッツバーグ大学, 工学部, 助教授
|
|---|
| Project Period (FY) |
1998 – 2000
|
| Project Status |
Completed (Fiscal Year 2000)
|
| Budget Amount *help |
¥6,900,000 (Direct Cost: ¥6,900,000)
Fiscal Year 2000: ¥2,200,000 (Direct Cost: ¥2,200,000)
Fiscal Year 1999: ¥2,200,000 (Direct Cost: ¥2,200,000)
Fiscal Year 1998: ¥2,500,000 (Direct Cost: ¥2,500,000)
|
|---|
| Keywords | Manufacturing Technique / Genetic Algorithm / Neural Network / Intelligent Manufacturing / Mathematical Programming / Scheduling / Optimal Design / Meta-heuristic |
|---|
| Research Abstract |
The purpose of this cooperative research project is to develop intelligent manufacturing techniques, which are for production scheduling, process planing, optimal facility locating, design and control of manufacturing cells, feature recognition from CAD data, design of manufacturing information network, and so on using Artificial Intelligent (AI) techniques such as Genetic Algorithm (GA), Neural Network (NN). We needed the research term of three years to accomplish the above purpose.
In the first year (1998), we investigated basic manufacturing techniques for multi-product manufacturing systems and developed some models for such systems. And fundamental mechanisms and properties of AI techniques, such as GA and NN, were investigated. Further, we applied GA and NN for basic scheduling problems, such as Job-shop Scheduling Problem (JSP) to verify the performances the techniques.
In the second year (1999), we developed some solution methods based on GA and NN for production scheduling problems, process planing problems, optimal facility location problems, design and control problems of manufacturing cells, feature recognition from CAD data, design of manufacturing information network. And evaluated the solution methods developed through many test problems to verify efficiencies of the methods.
In the last year (2000), we applied the AI-based methods for real-wold size problems of production scheduling, process planing, optimal facility locating, design and control of manufacturing cells, feature recognition from CAD data, design of manufacturing information network to finally evaluate the developed methods. And we made final report of this cooperative research project.
|
