Formal Representation of Machining Process and Systematizing of Machining Feature Model
| Project/Area Number |
10450052
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
機械工作・生産工学
|
|---|
| Research Institution | HOKKAIDO UNIVERSITY |
|---|
Principal Investigator |
KISHINAMI Takeshi Hokkaido Univ., Grad. School of Eng., Prof., 大学院・工学研究科, 教授 (30001796)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TANAKA Fumiki Hokkaido Univ., Grad. School of Eng., Inst., 大学院・工学研究科, 助手 (30207138)
KANAI Satoshi Hokkaido Univ., Grad. School of Eng., Asso. Prof., 大学院・工学研究科, 助教授 (90194878)
|
|---|
| Project Period (FY) |
1998 – 1999
|
| Project Status |
Completed (Fiscal Year 1999)
|
| Budget Amount *help |
¥8,000,000 (Direct Cost: ¥8,000,000)
Fiscal Year 1999: ¥1,200,000 (Direct Cost: ¥1,200,000)
Fiscal Year 1998: ¥6,800,000 (Direct Cost: ¥6,800,000)
|
|---|
| Keywords | Form Shaping Function / Machining Process Model / Machining Feature Model / Operation Planning / Process Model / Process Planning / EXPRESS / IDEFO / IDEF0 |
|---|
| Research Abstract |
This research deals with feature models of a machining operation and machined shapes for single cutting edge machining, which correspond directly to the machining process model. The feature model of the machining operation is proposed from the viewpoint of the dimension of a macro cutting tool, the dimension of feed motion, and the number of enveloping constraints. The feature model of the machined shape is also proposed from the viewpoint of the removal volume, the machined surface, and the surface texture. The linkage between both feature models is accomplished by the concept of a working tool. The working tool consists of the swept macro tool, the envelope of the swept macro tool, and the working edge. We proposed the abstract model of the machining process and the abstract model of operation planning which may represent the linear equations. We also pointed out that there are only 15 types of machining operations.
|
Report
(3 results)
Research Products
(3 results)
