| Project/Area Number |
11650138
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
機械工作・生産工学
|
|---|
| Research Institution | Keio University |
|---|
Principal Investigator |
AOYAMA Hideki Keio University, Faculty of Science and Technology, Associate Professor, 理工学部, 助教授 (40149894)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MATSUOKA Yoshiyuki Keio University, Faculty of Science and Technology, Associate Professor, 理工学部, 助教授 (20286636)
|
|---|
| Project Period (FY) |
1999 – 2000
|
| Project Status |
Completed (Fiscal Year 2000)
|
| Budget Amount *help |
¥3,500,000 (Direct Cost: ¥3,500,000)
Fiscal Year 2000: ¥1,100,000 (Direct Cost: ¥1,100,000)
Fiscal Year 1999: ¥2,400,000 (Direct Cost: ¥2,400,000)
|
|---|
| Keywords | style design / feeling (Kansei) / Kansei Language / modeling / high quality surface |
|---|
| Research Abstract |
The followings are the objectives of this research :
(1) Analysis and extraction of language (Kansei Language) which represents the style design in human feeling.
(2) Development of an assisting system for style design which is driven by Kansei Language
(3) Development of a constructing system of the high quality style-form
The results of this study are as follows :
(1) Language which means the feeling for the style form is extracted and defined as Kansei Language.
(2) The form-parameters determining the form which are controlled by the Kansei Language are derived.
(3) The concept design of an assisting system for the style design which executes the form-modeling and form-modification by changing the form-parameters with the Kansei Language was performed.
(4) The basic and detail design of the assisting system for the style design was done and the system was developed.
(5) The concept design of a system which constructs high quality surface form with the engineering parameters such as the high light lines and the curvature distribution by the Lansei Language was performed.
(6) The basic and detail design of a system to construct high quality surface form was done and the system was then developed.
|
