| Project/Area Number |
11694171
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
設計工学・機械要素・トライボロジー
|
|---|
| Research Institution | TOKYO METROPOLITAN INSTITUTE OF TECHNOLOGY |
|---|
Principal Investigator |
FUKUDA Shuichi TOKYO METROPOLITAN INSTITUTE OF TECHNOLOGY, DEPARTMENT OF PRODUCTION, INFORMATION AND SYSTEMS ENGINEERING, PROFESSOR, 工学部, 教授 (90107095)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
WATANABE Tomio OKAYAMA PREFECTURAL UNIVERSITY, DEPARTMENT OF INFORMATION ENGINEERING, PROFESSOR, 情報工学部, 教授 (30167150)
MURAKAMI Tamotsu UNIVERSITY OF TOKYO, DEPARTMENT OF MECHANICAL ENGINEERING, ASSOCIATE PROFESSOR, 大学院・工学研究科, 助教授 (20212251)
NAKAJIMA Naomasa UNIVERSITY OF THE AIR, DEPARTMENT OF LIBERAL ARTS, PROFESSOR, 教養学部, 教授 (00011073)
伊藤 照明 徳島大学, 工学部, 助教授 (90284306)
OKUBO Masashi OKAYAMA PREFECTURAL UNIVERSITY, DEPARTMENT OF INFORMATION ENGINEERING, ASSOCIATE PROFESSOR, 情報工学部, 助教授 (10233074)
TAKADA Hajime YOKOHAMA NATIONAL UNIVERSITY, DEPARTMENT OF MECHANICAL ENGINEERING, PROFESSOR (20154792)
|
|---|
| Project Period (FY) |
1999 – 2001
|
| Project Status |
Completed (Fiscal Year 2001)
|
| Budget Amount *help |
¥9,200,000 (Direct Cost: ¥9,200,000)
Fiscal Year 2001: ¥3,400,000 (Direct Cost: ¥3,400,000)
Fiscal Year 2000: ¥1,300,000 (Direct Cost: ¥1,300,000)
Fiscal Year 1999: ¥4,500,000 (Direct Cost: ¥4,500,000)
|
|---|
| Keywords | INTERACTIVE / CLOSED LOOP / INTEGRATION OF DESIGN AND MANUFACTURING / RAPID PROTOTYPING / CAD / E-LEARNING / HANDS ON EXPERIMENT / TELEOPERATION / インタラクティブ / クローズドループ / 設計と生産の統合 / ラピッドプロトタイピング / CAD / e遠隔学習 / ハンズオン実験 / テレオペレーション / 多様化 / 遠隔生産 / プロトタイピング / クローズドループ製品実現 / 設計・生産の統合 / システム試作 |
|---|
| Research Abstract |
IN THIS RESEARCH PROJECT, A SYSTEM TO CONNECT CAD AND RAPID PROTOTYPING EQUIPMENT THROUGH THE INTERNET WAS DEVELOPED. THE DEVELOPED METHODOLOGY CAN BE EASILY EXTENDED TO REMOTE LABORATORY ACTIVITIES. A REMOTE LABORATORY EXPERIMENT WAS CARRIED OUT SUCCESSFULLY BETWEEN STANFORD UNIVERSITY AND JAPAN. SUCH A CLOSED LOOP SYSTEM WILL IMMEDIATELY REFLECT THE CUSTOMER'S TASTE SO THAT A KANSEI-BASED CAD SYSTEM WAS ALSO DEVELOPED.
|
