| Project/Area Number |
13650208
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Thermal engineering
|
|---|
| Research Institution | University of Tsukuba |
|---|
Principal Investigator |
ABE Yutaka University of Tsukuba, Institute of Engineering Mechanics and Systems, Associate Professor, 機能工学系, 助教授 (10241720)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
成合 英樹 筑波大学, 機能工学系, 教授 (70134210)
|
|---|
| Project Period (FY) |
2001 – 2002
|
| Project Status |
Completed (Fiscal Year 2002)
|
| Budget Amount *help |
¥3,900,000 (Direct Cost: ¥3,900,000)
Fiscal Year 2002: ¥1,500,000 (Direct Cost: ¥1,500,000)
Fiscal Year 2001: ¥2,400,000 (Direct Cost: ¥2,400,000)
|
|---|
| Keywords | Reduced gravity / New materials / Ultrasonic wave / Levitated droplet / Melted material / Melting point / Droplet deformation / Visual data analysis |
|---|
| Research Abstract |
Under the micro-gravity environment, pure and high performance materials expected to be manufactured. It is possible to establish under-cooled condition for high temperature melted material levitated in space. The pure and high performance material is expected to be manufactured from the under-cooled condition. The purpose of the present study is to establish the technology of the high power ultrasonic wave system to levitate and control the high temperature melted material in space under the micro-gravity environment. From the results of the present study, it is confirmed that the simulated high temperature melted can be hold in a certain position in space by the ultrasonic standing wave. It is also clarified that the physical properties such as surface tension and viscosity can be measured with the present high power ultrasonic wave system. Furthermore, it is clarified that the temperature transient of the malted material can be established from above the melting temperature to below the melting temperature.
|
