| Project/Area Number |
15J04389
|
|---|
| Research Category |
Grant-in-Aid for JSPS Fellows
|
| Allocation Type | Single-year Grants |
|---|
| Section | 国内 |
|---|
| Research Field |
Material processing/Microstructural control engineering
|
|---|
| Research Institution | Kyoto University |
|---|
Principal Investigator |
高 斯 京都大学, 工学研究科, 特別研究員(DC2)
|
|---|
| Project Period (FY) |
2015-04-24 – 2017-03-31
|
| Project Status |
Declined (Fiscal Year 2016)
|
| Budget Amount *help |
¥1,900,000 (Direct Cost: ¥1,900,000)
Fiscal Year 2016: ¥900,000 (Direct Cost: ¥900,000)
Fiscal Year 2015: ¥1,000,000 (Direct Cost: ¥1,000,000)
|
|---|
| Keywords | yield point / ultrafine grain material / mechanical property / strain localization |
|---|
| Outline of Annual Research Achievements |
The objectives of the present research for year 2015-2016 have been achieved. The yield point phenomenon in ultrafine grained (UFG) interstitial free (IF)steel has been systematically studied by mechanical tests, microstructure observation and Digital Image Correlation (DIC) technique.
Accumulative roll-bonding (ARB) process and subsequent annealing were applied to the IF steel to fabricate the specimens having various mean grain sizes from conventional range (larger than tens micron-meters) to ultrafine range. It was found by the tensile test that discontinuous yielding appeared in the IF steel when the mean grain size was decreased to smaller than 2 micron meters. The yield stress showed an “extra-hardening”. Namely, it became higher than that predicted by the Hall-Petch relationship extrapolated from the conventionally coarse grain size range. Meanwhile, the uniform elongation of the material greatly decreased as the mean grain size became smaller than 2 micron. By the digital image correlation (DIC) technique, it was found that the dramatic decreasing in the uniform elongation is attributed to the initial severe strain localization occurred with the discontinuous yielding.
In conclusion, the present work investigated the yield point phenomena in ultrafine grained IF steel in details and deepened the understanding of the grain size effect on the strength and ductility of the materials. Further research works are expected on how to diminish the yield point phenomena and enhance the tensile ductility of the materials having ultra-fine grain sizes.
|
| Research Progress Status |
翌年度、交付申請を辞退するため、記入しない。
|
| Strategy for Future Research Activity |
翌年度、交付申請を辞退するため、記入しない。
|
Report
(1 results)
Research Products
(1 results)
