| Project/Area Number |
16360447
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Earth system and resources enginnering
|
|---|
| Research Institution | KYUSHU UNIVERCITY (2005-2006)
Akita University (2004) |
|---|
Principal Investigator |
SASAKI Kyuro Kyushu University, School of Engineering, Professor, 工学研究院, 教授 (60178639)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SUGAI Yuichi Kyushu University, School of Engineering, Research Associate, 工学研究院, 助手 (70333862)
大川 浩一 秋田大学, 工学資源学部, 助手 (00375221)
|
|---|
| Project Period (FY) |
2004 – 2006
|
| Project Status |
Completed (Fiscal Year 2006)
|
| Budget Amount *help |
¥14,100,000 (Direct Cost: ¥14,100,000)
Fiscal Year 2006: ¥1,300,000 (Direct Cost: ¥1,300,000)
Fiscal Year 2005: ¥8,500,000 (Direct Cost: ¥8,500,000)
Fiscal Year 2004: ¥4,300,000 (Direct Cost: ¥4,300,000)
|
|---|
| Keywords | Methane Hydrate / Horizontal Wells / Hot Water Injection / Dissociation / Gas production / Reservoir / Model Experiment / Numerical Simulation |
|---|
| Research Abstract |
The gas production system from methane hydrate layers by hot water injection using with dual horizontal wells have been investigated. In order to simulate gas production process in hot water chamber generated in methane hydrate layers, physical and numerical models have been presented. In this study, experiments and numerical simulations for the processes were carried out using two-dimensional scaled physical models to investigate fluids flow characteristics and the production performances. The thermal simulator, CMG's STARS, was used to simulate the experimental chamber growths of the physical and field models. The numerical simulations for the processes were also successfully carried out with a two-components (water and oil or methane hydrates), three-phases (water, methane hydrates and methane gas) and three-dimensional numerical model matching with the physical model. The results from the history-matched numerical simulations were found to be in good agreement with those of the experiments on productions and chamber shapes by using the Intermediate3-Stone1 wettability model. The simulations of field productions using dual horizontal wells 500 m in length were carried out to evaluate cumulative gas production during three years hot water injection with 500ton/day that was varied from 5×10^6 to 9×10^6 m^3. The production process was predicted to be economical, since convective heat transfer on the chamber boundary and gravity force on dissociated methane gas are expected. Even if there are horizontal thin mud layers with very low permeability between the dual horizontal wells, overall cumulative gas production becomes larger than that of homogeneous hydrate layers.
|
