Development of fabrication technology for micro channel and μTAS using a new controlled abrasives processing technology under electric field
| Project/Area Number |
16560110
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Akita Prefectural R&D Center (2005)
Akita Prefectural Institute Industrial Technology (2004) |
|---|
Principal Investigator |
AKAGAMI Yoichi Akita Prefectural R&D Center, Senior Researcher, 主任研究員 (00373217)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
UMEHARA Noritsugu Nagoya Univ., Advanced Materials and Manufacturing Laboratory Department of Mechanical Science and Engineering Graduate School of Engineering, Professor, 大学院・工学研究科機械理工学専攻, 教授 (70203586)
KATO Masaru Akita Prefectural R&D Center, Researcher, 研究員 (90390921)
|
|---|
| Project Period (FY) |
2004 – 2005
|
| Project Status |
Completed (Fiscal Year 2005)
|
| Budget Amount *help |
¥3,700,000 (Direct Cost: ¥3,700,000)
Fiscal Year 2005: ¥1,800,000 (Direct Cost: ¥1,800,000)
Fiscal Year 2004: ¥1,900,000 (Direct Cost: ¥1,900,000)
|
|---|
| Keywords | abrasives / functional fluid / AC electric field / Diamond / silicone oil / channel of micro / μTAS |
|---|
| Research Abstract |
In this research, it aims at the development of medical equipment that has high reliability..a cheap uniting the high precision processing technology and Medical Technology it.
Concretely, the processing technology is developed new the use of the a new controlled abrasives processing technology under electric field.
When the exchange electric field is given to a particle dispersion fluid that distributes dispersion particle abrasives to the solvent ; the arrangement control of abrasives under the AC electric field is a possible technology as for the silicone oil that is the non conductivity fluid. The minute style road can be created on the glass substrate by using this technology That is, it aimed to obtain a processing technology. that was more excellent than it processed it from the industrial method that used a chemical etching such as the acids process with the machine tool in the environment or more.
|
Report
(3 results)
Research Products
(16 results)
