| Project/Area Number |
16F16063
|
|---|
| Research Category |
Grant-in-Aid for JSPS Fellows
|
| Allocation Type | Single-year Grants |
|---|
| Section | 外国 |
|---|
| Research Field |
Applied materials
|
|---|
| Research Institution | Hokkaido University |
|---|
Principal Investigator |
O・B Wright 北海道大学, 工学研究院, 教授 (90281790)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MEZIL SYLVAIN 北海道大学, 工学(系)研究科(研究院), 外国人特別研究員
|
|---|
| Project Period (FY) |
2016-04-22 – 2018-03-31
|
| Project Status |
Completed (Fiscal Year 2017)
|
| Budget Amount *help |
¥2,300,000 (Direct Cost: ¥2,300,000)
Fiscal Year 2017: ¥1,100,000 (Direct Cost: ¥1,100,000)
Fiscal Year 2016: ¥1,200,000 (Direct Cost: ¥1,200,000)
|
|---|
| Keywords | Computed tomography / Picosecond ultrasonics / Nanoscale / Imaging |
|---|
| Outline of Annual Research Achievements |
The chosen sample for GHz CT testing is a glass fibre containing two holes along the main axis of its cylinder. Our approach is to excite acoustic waves from one side of the sample and to rotate the probe beam on the opposite side to evaluate the propagated acoustic field for various angles (with a fixed pump excitation spot). Then the fibre is rotated along its axis and the operation is repeated.
We realised 3D time-domain acoustic simulations using PZFLex software in a similar geometry. The simulated silica fibre is 5 μm diameter. The two axial air holes of diameter around 1 μm are considered to be vacuum so that no acoustic wave can propagate. This allowed us to demonstrate the detection of both holes with their correct position and also get an estimate of the hole size and shape.
The experimental setup was developed to match the particular needs of controlling probe and sample orientations. The setup has been validated on flat glass, and experiments are still ongoing in order to detect the acoustic signal and experimentally demonstrate acoustic computed tomography down to sub-micrometre scale.
|
| Research Progress Status |
29年度が最終年度であるため、記入しない。
|
| Strategy for Future Research Activity |
29年度が最終年度であるため、記入しない。
|
