| Project/Area Number |
17206033
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (A)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Electron device/Electronic equipment
|
|---|
| Research Institution | Sendai National College of Technology |
|---|
Principal Investigator |
MIYAGI Mitsunobu Sendai National College of Technology, Professor (90006263)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SAITO Seichi Tohoku Univ., Graduates School of Medicine, Associate Professor (80235043)
IWAI Katsumasa Sendai National College of Technology, Research Associate (10361130)
MATSUURA Yuji Tohoku Univ., Graduates School of Engineering, Associate Professor (10241530)
BABA Kazutaka Sendai National College of Technology, Professor (10192709)
石 芸尉 東北大学, 大学院・工学研究科, 助教授 (90323063)
|
|---|
| Project Period (FY) |
2005 – 2007
|
| Project Status |
Completed (Fiscal Year 2007)
|
| Budget Amount *help |
¥48,490,000 (Direct Cost: ¥37,300,000、Indirect Cost: ¥11,190,000)
Fiscal Year 2007: ¥11,180,000 (Direct Cost: ¥8,600,000、Indirect Cost: ¥2,580,000)
Fiscal Year 2006: ¥15,340,000 (Direct Cost: ¥11,800,000、Indirect Cost: ¥3,540,000)
Fiscal Year 2005: ¥21,970,000 (Direct Cost: ¥16,900,000、Indirect Cost: ¥5,070,000)
|
|---|
| Keywords | Hollow Fiber / Laser Treatment / Endoscope / Infrared Laser |
|---|
| Research Abstract |
A dielectric-coated metallic hollow fiber is one of the commonly used infrared fibers in medical field nowadays. We developed a flexible hollow fiber for multi-wavelength medical laser treatment in endoscope.
1. Development of a hollow fiber for multi-wavelength laser light transmission
In the fabrication of the cyclic olefin polymer (COP) coated silver (COP/Ag) hollow glass optical fiber, a liquid-phase coating method is normally used for the COP layer. The uniformity of the COP layer is one of the most important factors to obtain hollow fibers with high-performance. Low-loss properties have been attained in several key wavelength bands in the visible or infrared region for medical laser transmission. We proposed a closed loop-flowing method in order to coat a uniform COP layer. The method was successfully applied to the fabrication of hollow fiber.
2. Development of a ultra-flexible hollow fiber with biocompatibility and high reliability
We developed hollow fibers with polycarbonate (PC) capillaries for use as a supporting tube. By adjusting the drawing temperature in the fabrication of the PC capillaries, we obtained uniform PC capillaries with a smooth inner surface. We attained low loss properties for Er: YAG laser light transmission.
3. Development of micro output devices with a high performance
In order to change the output direction and focal distance of laser light in a small operation space, we developed glass sealing hollow fibers. We showed that the distal tips functioning as focusing optics when the shapes of sealed end surfaces are properly fabricated.
4. Construction and evaluation of a laser catheter
Er : YAG laser light and green pilot beam were simultaneously delivered through the endoscope with small losses even when it was sharply bent with a bending radius as small as 1 centimeter. Er : YAG laser light was delivered to reach a model calculus by using a hollow fiber and fragmentation efficiency were evaluated.
|
