Transient Stability Analysis Method for Wind Power Generation with using Induction Generators
| Project/Area Number |
17560262
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
電力工学・電気機器工学
|
|---|
| Research Institution | University of the Ryukyus |
|---|
Principal Investigator |
SENJYU Tomonobu University of the Ryukyus, Faculty of Engineering, Professor, 工学部, 教授 (40206660)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
URASAKI Naomitsu University of the Ryukyus, Faculty of Engineering, Associate Professor, 工学部, 助教授 (70305184)
|
|---|
| Project Period (FY) |
2005 – 2006
|
| Project Status |
Completed (Fiscal Year 2006)
|
| Budget Amount *help |
¥3,300,000 (Direct Cost: ¥3,300,000)
Fiscal Year 2006: ¥1,300,000 (Direct Cost: ¥1,300,000)
Fiscal Year 2005: ¥2,000,000 (Direct Cost: ¥2,000,000)
|
|---|
| Keywords | Wind Power Generation / Transient Stability / Induction Generator |
|---|
| Research Abstract |
Transient stability assessment of wind power generator is one of main issues in power system security and operation. The transient stability for the wind power generator is determined by its corresponding critical clearing time (CCT). Conventionally, determination of the induction generator CCT involves a large number of trial and error methods that requires repetitive runs of related time domain simulation. In this paper, we present transient stability analysis technique for induction generator used in wind power generating system at three-phase fault conditions. The proposed method saves time in consuming the repetitive runs of related time domain simulation. The validity of the developed technique is confirmed by the results obtained from trial and error method using Matlab/Simulink.
|
Report
(3 results)
Research Products
(4 results)
