Development of replicated aspherical mirrors for next-generation hard X-ray telescopes and evaluation of optical properties

• Project/Area Number: 18360073
• Research Category: Grant-in-Aid for Scientific Research (B)
• Allocation Type: Single-year Grants
• Section: 一般
• Research Field: Production engineering/Processing studies
• Research Institution: Chubu University
• Principal Investigator: NAMBA Yoshiharu Chubu University, 工学部, 教授 (40029129)
• Co-Investigator(Kenkyū-buntansha): CAO Guohui 中部大学, 先進計測研究センター, 研究員 (80424927)
• Project Period (FY): 2006 – 2008
• Project Status: Completed (Fiscal Year 2008)
• Budget Amount: ¥16,830,000 (Direct Cost: ¥15,000,000、Indirect Cost: ¥1,830,000); Fiscal Year 2008: ¥3,900,000 (Direct Cost: ¥3,000,000、Indirect Cost: ¥900,000); Fiscal Year 2007: ¥4,030,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥930,000); Fiscal Year 2006: ¥8,900,000 (Direct Cost: ¥8,900,000)
• Keywords: X線天文学 / 精密研磨 / 精密部品加工 / 人工衛星 / 光学特性 / 非球面金型 / レプリカ反射鏡 / ナノテクノロジー

Research Abstract

本研究は、次世代の硬X線望遠鏡用非球面レプリカ反射鏡を製作する基盤加工技術を開発することが主目的であり、最大径600mmの非球面金型が製作可能な超精密非球面加工装置を開発し、超精密ダイヤモンド切削により直径300mmの無電解ニッケル製非球面金型を製作した。金型の表面粗さ0.3nm rms以下を得るため、研磨法の開発を行い、直径300mm、ミラー長210mmの回転放物面・回転双曲面からなる大型金型を表面粗さ0.23nm rmsに仕上げることに成功した。

Research Products

• [Journal Article] 研磨加工 (2009)
  • Author(s): 難波義治
  • Journal Title: 精密工学会誌 75, 1 Pages: 74-75
  • NAID: 110007028785
  • Peer Reviewed
• [Journal Article] 研磨加工 (2009)
  • Author(s): 難波義治
  • Journal Title: 精密工学会誌 75 Pages: 74-75
  • NAID: 110007028785
• [Journal Article] Straightness Error Compensation for Ultra-Precision Machining Based on a Straightness Gauge (2008)
  • Author(s): G. Cao and Y. Namba
  • Journal Title: Key Engineering Materials 381-382 Pages: 105-108
  • Peer Reviewed
• [Journal Article] The NeXT x-ray telescope system (2008)
  • Author(s): Y. Ogasaka, H. Kunieda, Takuya Miyazawa, Peter Serlemitsos, Y. Namba
  • Journal Title: status update, Proc. SPIE 7011
• [Journal Article] Ultra-Precision Polishing of Electroless Nickel Molding Dies for Shorter Wavelength Applications (2008)
  • Author(s): Y. Namba, T. Shimomura, A. Fushiki, A. Beaucamp, I. Inasaki, H. Kunieda, Y. Ogasaka and K. Yamashita
  • Journal Title: Annals of the CIRP 57, 1 Pages: 337-340
  • Peer Reviewed
• [Journal Article] Single-point diamond turning of aspheric mirror with inner reflecting surfaces (2008)
  • Author(s): K. S. Chon, Y. Namba and K. H. Yoon
  • Journal Title: J. Key Engineering Materials 364-366 Pages: 39-42
  • Peer Reviewed
• [Journal Article] Fabrication of soft X-ray microscope mirror using epoxy replication method (2008)
  • Author(s): K. S. Chon, Y. Namba, K. W. Kim, S. Kang and K. H. Yoon
  • Journal Title: Opt. Eng 47, 1
  • Peer Reviewed
• [Journal Article] Ultra-Precision Polishing of Electroless Nickel Molding Dies for Shorter Wavelength Applications (2008)
  • Author(s): Namba, Yoshiharu
  • Journal Title: Annals of the CIRP 57 Pages: 337-340
  • Peer Reviewed
• [Journal Article] The NeXT x-ray telescope system : status update (2008)
  • Author(s): Ogasaka, Yasushi
  • Journal Title: Proc. SPIE 7011
• [Journal Article] Straightness Error Compensation for Ultra-Precision Machining Based on a Straightness Gauge (2008)
  • Author(s): Cao, Guohui
  • Journal Title: J. Key Engineering Materials 381-382 Pages: 105-108
  • Peer Reviewed
• [Journal Article] Fabrication of soft X-ray microscope mirror using epoxy replication method (2008)
  • Author(s): Chon, Kwon Su
  • Journal Title: Optical Engineering 47
  • Peer Reviewed
• [Journal Article] Single-point diamond turning of aspheric mirror with inner reflecting surfaces (2008)
  • Author(s): Chon, Kwon Su
  • Journal Title: J. Key Engineering Materials 364-366 Pages: 39-42
  • Peer Reviewed
• [Journal Article] Thinfoil multilayer-supermirror hard x-ray telescope for InFOCuS/SUMIT balloon experiments and NeXT satellite program (2007)
  • Author(s): Y. Ogasaka, H. Kunieda, J. Tueller, Y. Soong, Y. Namba
  • Journal Title: Proc. SPIE 6688
• [Journal Article] Figure tolerance of a Wolter type I mirror for the soft X-ray microscope (2007)
  • Author(s): K. S. Chon, Y. Namba and K. H. Yoon
  • Journal Title: Appl. Opt 46, 14 Pages: 2663-2669
  • Peer Reviewed
• [Journal Article] Figure tolerance of a Wolter type 1 mirror for the soft X-ray microscope (2007)
  • Author(s): Chon, Kwon Su
  • Journal Title: Applied Optics 46 Pages: 2663-2669
  • Peer Reviewed
• [Journal Article] Wolter type I x-ray focusing mirror using multilayer coatings (2006)
  • Author(s): K. S. Chon, Y. Namba and K. H. Yoon
  • Journal Title: Appl. Opt. 45, 19 Pages: 4609-4616
  • Peer Reviewed
• [Journal Article] Fabrication of Condenser Mirror for a Soft X-ray Microscope, Proc (2006)
  • Author(s): K. S. Chon, Y. Namba and K. H. Yoon
  • Journal Title: 8th International Conference on X-ray Microscopy, IPAP Conf. Series, 7, The Institute of Pure and Applied Physics, Tokyo Pages: 121-123
  • Peer Reviewed
• [Journal Article] Development and performance of the advanced hard x-ray telescope for the balloon experiment (2006)
  • Author(s): Takuya Miyazawa, Ryo Shibata, Yasushi Ogasaka, Yoshihiro Fukaya, Yoshiharu Namba
  • Journal Title: Proc. SPIE 6626
• [Journal Article] Optimization of a Wolter type I mirror for a soft X-ray microscope (2006)
  • Author(s): K. S. Chon, Y. Namba and K. H. Yoon
  • Journal Title: Prec. Eng 30, 2 Pages: 223-230
  • Peer Reviewed
• [Journal Article] Optimization of a Wolter type I mirror for a soft X-ray microscope (2006)
  • Author(s): Kwon Su Chon
  • Journal Title: Precision Engineering 30,2 Pages: 223-230
• [Journal Article] Wolter type I x-ray focusing mirror using multilayer coatings (2006)
  • Author(s): Kwon Su Chon
  • Journal Title: Applied Optics 45,19 Pages: 4609-4616
• [Presentation] 強誘電体単結晶PMN-PTの超精密研削 (2009)
  • Author(s): 高橋秀彰
  • Organizer: 2009年度精密工学会第16回学生会員卒業研究発表講演会
  • Place of Presentation: 中央大学, 東京
  • Year and Date: 2009-03-11
• [Presentation] 精密工学研究室の研究成果の概要 (2009)
  • Author(s): 難波義治
  • Organizer: 精密工学会総合生産システム専門委員会
  • Place of Presentation: 中部大学, 春日井
  • Year and Date: 2009-03-09
• [Presentation] 次世代X線望遠鏡用非球面金型の加工と計測, 超精密加工と超高精度計測の融合シンポジウム (2009)
  • Author(s): 難波義治
  • Organizer: 中部大学名古屋キャンパス
  • Place of Presentation: 名古屋(3-15)
  • Year and Date: 2009-03-06
• [Presentation] 次世代X線望遠鏡用非球面金型の加工と計測 (2009)
  • Author(s): 難波義治
  • Organizer: 超精密加工と超高精度計測の融合シンポジウム
  • Place of Presentation: 中部大学, 名古屋
  • Year and Date: 2009-03-06
• [Presentation] 精密工学研究室の研究成果の概要 (2009)
  • Author(s): 難波義治
  • Organizer: 精密工学会ナノ精度機械加工専門委員会
  • Place of Presentation: 中部大学, 春日井
  • Year and Date: 2009-02-26
• [Presentation] Ultra-Precision Machining (2008)
  • Author(s): Namba, Yoshiharu
  • Organizer: Special Seminar of Shanghai Jiao Tong University
  • Place of Presentation: 上海交通大学, 上海, 中国
  • Year and Date: 2008-11-27
• [Presentation] Precision Shape Measurement of Large Aspheric Optics Based on Error Compensation, Proc (2008)
  • Author(s): Guohui Cao and Yoshiharu Namba
  • Organizer: the 6th China-Japan International Conference on Ultra-Precision Machining, Hunan University
  • Place of Presentation: Changsha, China(114-118)
  • Year and Date: 2008-11-24
• [Presentation] Precision Shape Measurement of Large Aspheric Optics Based onError Compensation (2008)
  • Author(s): Cao, Guohui
  • Organizer: The 6th China-Japan International Conf. on Ultra-Precision Machining
  • Place of Presentation: 湖南大学, 長沙, 中国
  • Year and Date: 2008-11-24
• [Presentation] テーブルトップ硬X線望遠鏡用非球面反射鏡の超精密加工 (2008)
  • Author(s): 鈴木聖広, 難波義治, 小川大介
  • Organizer: 日本機械学会第7回生産加工・工作機械部門講演会, 長良川国際会議場
  • Place of Presentation: 岐阜(311-312)
  • Year and Date: 2008-11-22
• [Presentation] 誤差補正による非球面光学素子の超精密形状計測 (2008)
  • Author(s): 曹国輝, 難波義治
  • Organizer: 日本機械学会第7回生産加工・工作機械部門講演会, 長良川国際会議場
  • Place of Presentation: 岐阜(273-274)
  • Year and Date: 2008-11-22
• [Presentation] テーブルトップ硬X線望遠鏡用非球面反射鏡の超精密加工 (2008)
  • Author(s): 鈴木聖広
  • Organizer: 日本機械学会第7回生産加工・工作機械部門講演会
  • Place of Presentation: 長良川国際会議場, 岐阜
  • Year and Date: 2008-11-22
• [Presentation] 誤差補正による非球面光学素子の超精密形状計測 (2008)
  • Author(s): 曹 国輝
  • Organizer: 日本機械学会第7回生産加工・工作機械部門講演会
  • Place of Presentation: 長良川国際会議場, 岐阜
  • Year and Date: 2008-11-22
• [Presentation] プラスチックのレーザフォーミングにおける内部応力と変形特性の検討 (2008)
  • Author(s): 田中俊輔
  • Organizer: 日本機械学会第7回生産加工・工作機械部門講演会
  • Place of Presentation: 長良川国際会議場, 岐阜
  • Year and Date: 2008-11-21
• [Presentation] フェムト秒レーザ照射による金属表面のナノ構造生成 (2008)
  • Author(s): 斉 立涛
  • Organizer: 日本機械学会第7回生産加工・工作機械部門講演会
  • Place of Presentation: 長良川国際会議場, 岐阜
  • Year and Date: 2008-11-21
• [Presentation] Fabrication Technology for Next-Generation Hard X-Ray Mirrors Using Ultra-Precision Aspherical Molding Dies (2008)
  • Author(s): Yoshiharu Namba
  • Organizer: Proc. the 13th International Machine Tool Engineers'Conference, Tokyo Big Sight
  • Place of Presentation: Tokyo(201)
  • Year and Date: 2008-10-30
• [Presentation] Fabrication Technology for Next-Generation Hard X-Ray Mirrors Using Ultra-Precision Aspherical Molding Dies (2008)
  • Author(s): Namba, Yoshiharu
  • Organizer: Proc. the 13th International Machine Tool E ngineers' Conference
  • Place of Presentation: Tokyo Big Sight, Tokyo
  • Year and Date: 2008-10-30
• [Presentation] Ultraprecision polishing of electroless nickel molding dies and manufacturing of replicated aspheric Pt/C multilayer mirrors (2008)
  • Author(s): Namba, Yoshiharu
  • Organizer: Japan/us Design Meeting on ASTRO-H Satellite
  • Place of Presentation: JAXA/ISAS, 相模原
  • Year and Date: 2008-09-25
• [Presentation] 超精密加工・形状計測と評価 (2008)
  • Author(s): 難波義治
  • Organizer: 2008年度精密工学会秋季大会シンポジウム
  • Place of Presentation: 東北大学, 仙台
  • Year and Date: 2008-09-18
• [Presentation] NeXT WG : 開発の現状(IV) : 非球面斜入射反射鏡の製作 (2008)
  • Author(s): 小賀坂康志
  • Organizer: 日本天文学会2008年秋季年会
  • Place of Presentation: 岡山理科大学, 岡山
  • Year and Date: 2008-09-12
• [Presentation] 非球面斜入射反射鏡の製作 (2008)
  • Author(s): 難波義治
  • Organizer: 2008年秋季第69回応用物理学会学術講演会講演予稿集, 中部大学
  • Place of Presentation: 春日井(75)
  • Year and Date: 2008-09-04
• [Presentation] 非球面光学素子の形状計測 (2008)
  • Author(s): 曹国輝, 難波義治
  • Organizer: 2008年秋季第69回応用物理学会学術講演会講演予稿集, 中部大学
  • Place of Presentation: 春日井(68)
  • Year and Date: 2008-09-04
• [Presentation] 中部大学先進計測研究センターの概要 (2008)
  • Author(s): 難波義治
  • Organizer: 2008年秋季第69回応用物理学会学術講演会
  • Place of Presentation: 中部大学, 春日井
  • Year and Date: 2008-09-04
• [Presentation] 非球面光学素子の形状計測 (2008)
  • Author(s): Cao, Guohui
  • Organizer: 2008年秋季第69回応用物理学会学術講演会
  • Place of Presentation: 中部大学, 春日井
  • Year and Date: 2008-09-04
• [Presentation] 非球面斜入射反射鏡の製作 (2008)
  • Author(s): 難波義治
  • Organizer: 2008年秋季第69回応用物理学会学術講演会
  • Place of Presentation: 中部大学, 春日井
  • Year and Date: 2008-09-04
• [Presentation] 次世代X線非球面反射鏡の製作 (2008)
  • Author(s): 難波義治
  • Organizer: 精密加工研究会第67回例会
  • Place of Presentation: 東北大学, 仙台
  • Year and Date: 2008-05-16
• [Presentation] Influence of Irradiation Method on Laser Forming Characteristics of Plastics (2008)
  • Author(s): Yasuhiro Okamoto, Yoshiyuki Uno, Zazuli Mohid and Yoshiharu Namba
  • Organizer: Proc. of International Workshop on Thermal Forming and Welding Distortion
  • Place of Presentation: Bremen, Germany(385-393)
  • Year and Date: 2008-04-23
• [Presentation] Influence of Irradiation Method on Laser Forming Characteristics of Plastics (2008)
  • Author(s): Okamoto, Yasuhiro
  • Organizer: The Second International Workshop on Thermal Forming and Welding Distortion
  • Place of Presentation: Bremen, Germany
  • Year and Date: 2008-04-23
• [Presentation] Precision Laser Adjustment Using CW Diode Laser (2008)
  • Author(s): Litao Qi and Yoshiharu Namba
  • Organizer: Proc. of International Workshop on Thermal Forming and Welding Distortion
  • Place of Presentation: Bremen, Germany(119-131)
  • Year and Date: 2008-04-22
• [Presentation] Precision Laser Adjustment Using CW Diode Laser (2008)
  • Author(s): Qi, Litao
  • Organizer: The Second International Workshop on Thermal Forming and Welding Distortion
  • Place of Presentation: Bremen, Germany
  • Year and Date: 2008-04-22
• [Presentation] Pt/C多層膜非球面レプリカ反射鏡の開発 (2008)
  • Author(s): 難波義治
  • Organizer: レーザー研シンポジウム2008
  • Place of Presentation: 大阪大学, 吹田
  • Year and Date: 2008-04-17
• [Presentation] 硬X線顕微鏡用非球面反射鏡の製作技術の開発 (2008)
  • Author(s): 小川大介, 難波義治
  • Organizer: 日本機械学会東海支部第57期講演会講演論文集
  • Place of Presentation: 名古屋大学, 名古屋(135-136)
  • Year and Date: 2008-03-11
• [Presentation] 硬X線顕微鏡用非球面反射鏡の製作技術の開発 (2008)
  • Author(s): 小川大介
  • Organizer: 日本機械学会東海支部第57期講演会
  • Place of Presentation: 名古屋大学,名古屋
  • Year and Date: 2008-03-11
• [Presentation] 硬X線望遠鏡用無電解ニッケル金型の超精密研磨 (2008)
  • Author(s): 細野昭洋
  • Organizer: 日本機械学会東海学生会第39回学生員卒業研究発表会
  • Place of Presentation: 名古屋大学,名古屋
  • Year and Date: 2008-03-10
• [Presentation] Pt/C多層膜の原子間力顕微鏡による計測 (2008)
  • Author(s): 佐藤哲郎
  • Organizer: 日本機械学会東海学生会第39回学生員卒業研究発表会
  • Place of Presentation: 名古屋大学,名古屋
  • Year and Date: 2008-03-10
• [Presentation] 半導体レーザを用いたSUS304薄板のレーザ・フォーミング (2008)
  • Author(s): 窪野善規
  • Organizer: 日本機械学会東海学生会第39回学生員卒業研究発表会
  • Place of Presentation: 名古屋大学,名古屋
  • Year and Date: 2008-03-10
• [Presentation] 超精密加工の最前線-見えない光を利用するためのものづくり技術- (2008)
  • Author(s): 難波義治
  • Organizer: SME東京支部2月例会
  • Place of Presentation: 大田区生活センター,東京
  • Year and Date: 2008-02-15
• [Presentation] 超精密加工技術の応用 (2008)
  • Author(s): 難波義治
  • Organizer: 砥粒加工学会「賛助会員会テクノフェア2008」特別講演会
  • Place of Presentation: 大田区産業プラザ,東京
  • Year and Date: 2008-02-15
• [Presentation] X線用集光光学素子の製作 (2008)
  • Author(s): 難波義治
  • Organizer: レーザー学会「レーザーによるXUV〜X線発生とその応用」専門委員会
  • Place of Presentation: 大阪大学,吹田
  • Year and Date: 2008-02-07
• [Presentation] Manufacturing X-ray Optics by Molding Technology (2008)
  • Author(s): Yoshiharu Namba
  • Organizer: The 3 rd International Symposium on X-ray Imaging Science
  • Place of Presentation: Wonkwang University, Ikusan, Korea(143-149)
  • Year and Date: 2008-01-25
• [Presentation] Manufacturing X-ray Optics by Molding Technology (2008)
  • Author(s): Namba, Yoshiharu
  • Organizer: The 3 rd International Symposium on X-ray Imaging Science
  • Place of Presentation: Wonkwang Univ. Ikusan, Korea
  • Year and Date: 2008-01-25
• [Presentation] YAGレーザを用いたレーザフォーミングにおける照射方法の検討 (2007)
  • Author(s): 田中俊輔
  • Organizer: 2007年度精密工学会中国四国支部広島地方学術講演会
  • Place of Presentation: ビューポートくれ,呉
  • Year and Date: 2007-11-16
• [Presentation] 硬X線望遠鏡用非球面金型の製作 (2007)
  • Author(s): 難波義治
  • Organizer: 第9回X線結像光学シンポジウム講演予稿集
  • Place of Presentation: 中部大学名古屋キャンパス, 名古屋(29-30)
  • Year and Date: 2007-11-03
• [Presentation] 硬X線望遠鏡用非球面金型の製作 (2007)
  • Author(s): 難波義治
  • Organizer: 第9回X線結像光学シンポジウム
  • Place of Presentation: 中部大学,名古屋
  • Year and Date: 2007-11-03
• [Presentation] X線顕微鏡用無電解ニッケル非球面金型の超精密ダイヤモンド切削 (2007)
  • Author(s): 小川大介, 難波義治, Kwon Su Chon and Kwon-Ha Yoon
  • Organizer: 第9回X線結像光学シンポジウム講演予稿集
  • Place of Presentation: 中部大学名古屋キャンパス, 名古屋(113-114)
  • Year and Date: 2007-11-02
• [Presentation] X線顕微鏡用無電解ニッケル非球面金型の超精密ダイヤモンド切削 (2007)
  • Author(s): 小川大介
  • Organizer: 第9回X線結像光学シンポジウム
  • Place of Presentation: 中部大学,名古屋
  • Year and Date: 2007-11-02
• [Presentation] Development of Large Ultra-Precision Diamond Turning Machine for Making Next Generation Hard X-Ray Telescopes, Proc (2007)
  • Author(s): Yoshiharu Namba, Takuji Shimomura, Toshiyuki Shimizu, Hideyo Kunieda, Yasushi Ogasaka, Yuzuru Tawara, Koujun Yamashita
  • Organizer: ASPE 2007 Annual Meeting
  • Place of Presentation: Dallas, TX., U.S.A.(65-68)
  • Year and Date: 2007-10-17
• [Presentation] Development of Large Ultra-Precision Diamond Turning Machine for Making Next Generation Hard X-Ray Telescopes (2007)
  • Author(s): Namba, Yoshiharu
  • Organizer: American Society for Precision Engineering Annual Meeting
  • Place of Presentation: Fairmont Hotel, Dallas, TX, U. S. A.
  • Year and Date: 2007-10-17
• [Presentation] Straightness Error Compensation for Ultra-Precision Machining Based on a Straightness Gauge (2007)
  • Author(s): Guohui Cao and Yoshiharu Namba
  • Organizer: Proc. 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII2007)
  • Place of Presentation: Sendai, Japan(605-608)
  • Year and Date: 2007-09-25
• [Presentation] Straightness Error Compensation for Ultra-Precision Machining Based on a Straightness Gauge (2007)
  • Author(s): Cao, Guohui
  • Organizer: Proc. 8th International Symposium on Measurement Technology and Intelligent Instruments
  • Place of Presentation: Tohoku University, Sendai, Japan
  • Year and Date: 2007-09-25
• [Presentation] Manufacturing of Replicated Optics for Extremely Short Wavelength Applications, Proc (2007)
  • Author(s): Yoshiharu Namba
  • Organizer: of the 3rd SPIE International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT07)
  • Place of Presentation: Chengdu, China
  • Year and Date: 2007-07-09
• [Presentation] Manufacturing of Replicated Optics for Extremely Short Wavelength Applications (2007)
  • Author(s): Namba, Yoshiharu
  • Organizer: 3rd SPIE International Symposium on Advanced Optical Manufacturing and Testing Technology
  • Place of Presentation: Golden Bull Hotel, Chengdu, China
  • Year and Date: 2007-07-09
• [Presentation] Ultra-Precision Machining of Electroless Nickel Molding Dies for Aspheric Hard X-Ray Telescope Mirrors (2007)
  • Author(s): Y. Namba
  • Organizer: The 2nd Korea-Japan Conference on Nano Biomedical Imaging and X-ray Microscopy
  • Place of Presentation: Jeju, Korea
  • Year and Date: 2007-03-02
• [Presentation] Single-point diamond turning of aspheric mirror with inner reflecting surfaces (2007)
  • Author(s): K. S. Chon, Y. Namba and K. H. Yoon
  • Organizer: Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007)
  • Place of Presentation: Hong Kong(24)
  • Year and Date: 2007-01-11
• [Presentation] Trends of Optics Manufacturing, Proc (2007)
  • Author(s): Y. Namba and S. Kitagawa
  • Organizer: Asia Pacific Conference on Optics Manufacture 2007 (APCOM 2007)
  • Place of Presentation: Hong Kong(4)
  • Year and Date: 2007-01-11
• [Presentation] 硬X線望遠鏡用非球面反射鏡製作法の提案 (2006)
  • Author(s): 難波義治, 下村拓路, 清水敏之
  • Organizer: 日本機械学会第6回生産加工・工作機械部門講演会, 生産性国際交流センター
  • Place of Presentation: 葉山(251-252)
  • Year and Date: 2006-11-25
• [Presentation] Manufacturing of Replicated Pt/C Multilayer Mirrors for Hard X-Ray Telescopes (2006)
  • Author(s): Y. Namba, A. Fushiki, H. Kunieda, Y. Ogasaka, Y. Tawara and K. Yamashita
  • Organizer: Proc. ASPE 2006 Annual Meeting
  • Place of Presentation: Monterey, CA., U.S.A.(407-410)
  • Year and Date: 2006-10-17
• [Presentation] Direct Machining of Inner Reflecting Surfaces for a Soft X-ray Microscope, Proc (2006)
  • Author(s): Kwon Su Chon, Yoshiharu Namba and Kwon-Ha Yoon
  • Organizer: ASPE 2006 Annual Meeting
  • Place of Presentation: Monterey, CA., U.S.A.(399-402)
  • Year and Date: 2006-10-17
• [Presentation] X線望遠鏡用無電解ニッケル金型の超精密研磨法 (2006)
  • Author(s): 下村拓路, 難波義治
  • Organizer: 2006年度精密工学会秋季大会学術講演会講演論文集
  • Place of Presentation: 宇都宮大学, 宇都宮(799-800)
  • Year and Date: 2006-09-22
• [Presentation] Fabrication of a Condenser Mirror for a Soft X-ray Microscope, Proc (2006)
  • Author(s): Kwon Su Chon, Yoshiharu Namba and Kwon-Ha Yoon
  • Organizer: 8th Int. Conf. X-ray Microscopy
  • Place of Presentation: Himeji, Japan(121-123)
  • Year and Date: 2006-07-26
• [Book] 超精密研削加工(機械工学便覧デザイン編β3, 加工学・加工機器) (2006)
  • Author(s): 難波義治
  • Publisher: 日本機械学会
• [Book] 機械工学便覧デザイン編β3加工学・加工機器 (2006)
  • Author(s): 伊東誼
  • Total Pages: 262
  • Publisher: 財団法人日本機械学会
• [Remarks] 実行委員長 : 超精密加工と超高精度計測の融合シンポジウム, 中部大学名古屋キャンパス, 名古屋(2009).(2009年3月6日)
• [Remarks] Conference Chair, 6th China Japan International Conference on Ultra-Precision Machining, Changsha, China(2008).(2008年11月24日-25日)
• [Remarks] Conference Chair, Advanced Optical Manufacturing Technologies, AOMATT 2008, Chengdu, China(2008).(2008 年11月19日-21日)
• [Remarks] 主催 : 精密工学会秋季大会学術講演会シンポジウム「実用化を目指したナノレベルでの極限光学素子の加工, 計測, 評価」, 東北大学, 仙台 (2008). (2008年9月18日)
• [Remarks] Conference Chair : The 3rd International Symposium on X-ray Imaging Science, Wonkwang University, Ikusan, Korea (2008). (2008年1月25日)
• [Remarks] 実行委員長:第9 回X 線結像光学シンポジウム, 中部大学名古屋キャンパス, 名古屋(2007).(2007年11月2日-3日)
• [Remarks] Conference Chair : Japan-Korea Optics Manufacturing Symposium, Chubu University, Nagoya (2007). (2007 年8 月8 日)
• [Remarks] 主催 : 平成18 年度中部大学生産技術開発センター研究発表会, 「次世代硬X線望遠鏡の開発と課題」, 中部大学名古屋キャンパス, 名古屋(2007).(2007年3月16日)
• [Remarks] Conference Chair : The 2nd Korea-Japan Conference on Nano Biomedical Imaging and X-ray Microscopy, Jeju, Korea(2007).(2007年3月2日)
• [Remarks] 難波義治 : 超精密非球面金型を使用する次世代X 線反射鏡の製作技術開発, 第13回国際工作機械技術者会議論文集, 東京ビッグサイト, 東京(2008)p.38.(2008年10月30日-11月4日)
• [Remarks] 難波義治 : 超精密非球面金型を用いたX線反射鏡の製作技術開発, 中部大学フェアー-産官学連携・人づくり・ものづくり-,中部大学, 春日井 (2008). (2008年9月19日)
• [Remarks] 難波義治 : 生産技術開発センター, 2008年秋季第69回応用物理学会学術講演会展示会,中部大学, 春日井(2008).(2008年9月2-5日)
• [Remarks] 難波義治 : 次世代超精密加工技術, 砥粒加工学会「賛助会員会テクノフェア2008」, 大田区産業プラザ, 東京 (2008).(2008年2月14日-16日)
• [Remarks] 難波義治 : 次世代超精密加工技術, 砥粒加工学会, 大田区産業プラザ, 東京(2007).(2007年2月16日)
• [Remarks] 難波義治 : X線レプリカ反射鏡の製作技術, JIMTOF2006工作機械関連のニューテクノロジーポスター展, 東京ビッグサイト, 東京(2006).(2006年11月1日-8日)
• [Remarks]
  • URL: http://www-mech.chubu.ac.jp/Mech_Labs/namba/default.htm