Advanced production and distribution method considering total optimization under the JIT supply process environment

• Project/Area Number: 19510144
• Research Category: Grant-in-Aid for Scientific Research (C)
• Allocation Type: Single-year Grants
• Section: 一般
• Research Field: Social systems engineering/Safety system
• Research Institution: Kanazawa University
• Principal Investigator: YOO Jaekyu Kanazawa University, 経済学経営学系, 教授 (20324494)
• Co-Investigator(Kenkyū-buntansha): SHIMIZU Yoshiaki 豊橋技術科学大学, 工学部, 教授 (10109085)
• Project Period (FY): 2007 – 2009
• Project Status: Completed (Fiscal Year 2009)
• Budget Amount: ¥4,420,000 (Direct Cost: ¥3,400,000、Indirect Cost: ¥1,020,000); Fiscal Year 2009: ¥1,300,000 (Direct Cost: ¥1,000,000、Indirect Cost: ¥300,000); Fiscal Year 2008: ¥1,430,000 (Direct Cost: ¥1,100,000、Indirect Cost: ¥330,000); Fiscal Year 2007: ¥1,690,000 (Direct Cost: ¥1,300,000、Indirect Cost: ¥390,000)
• Keywords: 経営工学 / システム工学 / 生産管理 / 多目的最適化手法 / TOCスケジューリング手法 / スケジューリング手法

Research Abstract

We developed an advanced manufacturing system called Pull-Push type production method. It is possible in promoting the process efficiency while keeping production flexibility. Moreover, we tried to apply the proposed method to a distribution system of the supply chain. After all, we clarified that the proposed method is superior to JIT production for changes in production environment.

Research Products

• [Journal Article] 混合品種組立てラインへの製品投入順序に関する多目的解析 (2009)
  • Author(s): 清水良明、和気憲矢、柳在圭
  • Journal Title: システム制御情報学会誌 53 Pages: 49-57
  • NAID: 10024985735
  • Peer Reviewed
• [Journal Article] 混合品種組立てラインへの製品投入順序に関する多目的解析 (2009)
  • Author(s): 清水良明
  • Journal Title: システム制御情報学会誌 53 Pages: 49-57
  • NAID: 10024985735
  • Peer Reviewed
• [Presentation] Multi-Objective Optimization Planning of Mixed-Model Assembly Line, Proc. (2010)
  • Author(s): Shimizu Y., Waki T., Yoo JK.
  • Organizer: 11th Asia Pacific Industrial Engineering & Management Systems Conference
  • Place of Presentation: Renaissance Hotel Melaka (Melaka, Malaysia)
  • Year and Date: 2010-12-08
• [Presentation] Multi-Objective Optimization Planning of Mixed-Model Assembly Line (2010)
  • Author(s): Yoshiaki Shimizu, Toshiya Waki, Jae-Kyu Yoo
  • Organizer: Proc.11th Asia Pacific Industrial Engineering & Management Systems Conference
  • Place of Presentation: Renaissance Hotel Melaka (Melaka, Malaysia)
  • Year and Date: 2010-12-08
• [Presentation] Hybrid Meta-Heuristic Approach for Multi-Commodity Logistics Optimization over Planning Horizon (2009)
  • Author(s): Shimizu Y., Fujiku T., Yoo JK.
  • Organizer: Proc.4th Int.Symp.on Scheduling
  • Place of Presentation: Nagoya Institute of Technology (Nagoya, Japan)
  • Year and Date: 2009-07-04
• [Presentation] A Hybrid Meta-Heuristic Approach for Multi-Commodity Logistics Optimization over Planning Horizon (2009)
  • Author(s): Yoshiaki Shimizu, Takashi Fujikura, Jae-Kyu Yoo
  • Organizer: Proc.4th, Int.Symp.on Scheduling
  • Place of Presentation: Nagoya Institute of Technology (Nagoya)
  • Year and Date: 2009-07-04
• [Presentation] A Pratical TOC Scheduling Method Using Pull-Push Production Concept (2008)
  • Author(s): Yoo JK., Shimizu Y.
  • Organizer: The 9^<th> Asia pacific Industrial Engineering & Management System
  • Place of Presentation: Nusa Dua Beach Hotel (Bali, Indonesia)
  • Year and Date: 2008-12-05
• [Presentation] A Practical TOC Scheduling Method Using Pull-Push Production Concept (2008)
  • Author(s): JK. Yoo
  • Organizer: The 9^<th> Asia pacific Industrial Engineering & Management System & 2008 Chinese Institute of lndustrial Engineers Conference
  • Place of Presentation: Indonesia(Bali)
  • Year and Date: 2008-12-05
• [Presentation] Comparison of Multi-objective Analysis Methods Applied to a Sequencing Planning of Mixed-model Assembly Line (2008)
  • Author(s): Shimizu Y., Waki T., Yoo JK.
  • Organizer: The 9^<th> Asia pacific Industrial Engineering & Management System
  • Place of Presentation: Nusa Dua Beach Hotel (Bali, Indonesia)
  • Year and Date: 2008-12-04
• [Presentation] Comparison of Multi-objective Analysis Methods Applied to a Sequencing Planning of Mixed-model Assembly Line (2008)
  • Author(s): JK. Yoo
  • Organizer: The 9^<th> Asia pacific Industrial Engineering & Management System & 2008 Chinese Institute of lndustrial Engineers Conference
  • Place of Presentation: Indonesia(Bali)
  • Year and Date: 2008-12-04
• [Presentation] Multi-Objective Analysis For A Sequencing Planning Of Mixed-Model Assembly Line (2008)
  • Author(s): Shimizu Y., Waki T., Yoo JK.
  • Organizer: 2008 International Symposium on Flexible Automation (ISFA)
  • Place of Presentation: Georgia Institute of Technology, (Atlanta, Georgia, USA)
  • Year and Date: 2008-06-24
• [Presentation] Multi-Objective Analysis For A Sequencing Planning Of Mixed-Model Assembly Line (2008)
  • Author(s): JK. Yoo
  • Organizer: 2008 International Symposium on Flexible Automation (ISFA)
  • Place of Presentation: USA(Atlanta, Georgia)
  • Year and Date: 2008-06-24
• [Presentation] A Practical Method for Solving Simultaneous Sequencing Problem of Mixed-Model Assembly Line and Paint Line under Multiple Objectives (2007)
  • Author(s): Yoo JK., Moriyama T., Shimizu Y.
  • Organizer: Proc.8th Asia Pacific Industrial Engineering & Management Systems Conference
  • Place of Presentation: Ambassador Hotel (Kaohsiung, Taiwan)
  • Year and Date: 2007-12-12
• [Presentation] A Practical Method for Solving Simultaneous Sequencing Problem of Mixed-Model Assembly Line and Paint Line under Multiple Objectives (2007)
  • Author(s): 柳 在圭
  • Organizer: The 8th Asia pacific Industrial Engineering & Management System & 2007 Chinese Institute of Industrial Engineers Conference
  • Place of Presentation: 台湾(高雄)
  • Year and Date: 2007-12-12
• [Presentation] Multi-objective Decision Making Support toward Flexible Product Design Optimization (2007)
  • Author(s): 清水良明
  • Organizer: Proc.8th Asia Pacific Industrial Engineering & Management Systems Conference
  • Place of Presentation: Ambassador Hotel (Kaohsiung, Taiwan)
  • Year and Date: 2007-12-11
• [Presentation] Multi-objective Decision Making Support toward Flexible Product Design Optimization (2007)
  • Author(s): 清水 良明
  • Organizer: The 8th Asia pacific Industrial Engineering & Management System & 2007 Chinese Institute of Industrial Engineers Conference
  • Place of Presentation: 台湾(高雄)
  • Year and Date: 2007-12-11
• [Presentation] 多目的最適化手法による生産ラインの製品投入順序づけ (2007)
  • Author(s): 柳在圭、森山卓也、清水良明
  • Organizer: 日本機械学会年次大会
  • Place of Presentation: 関西大学(大阪)
  • Year and Date: 2007-09-10
• [Presentation] 多目的最適化手法による生産ラインの製品投入順序づけ (2007)
  • Author(s): 柳 在圭
  • Organizer: 日本機械学会年次大会
  • Place of Presentation: 大阪(関西大学)
  • Year and Date: 2007-09-10