Fabrication of interface between nanomaterials using dielectrophoresis and its application to sensing devices
| Project/Area Number |
20360184
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Measurement engineering
|
|---|
| Research Institution | Kyushu University |
|---|
Principal Investigator |
SUEHIRO Junya Kyushu University, 大学院・システム情報科学研究院, 教授 (70206382)
|
|---|
| Co-Investigator(Renkei-kenkyūsha) |
OKADA Tatsuo 九州大学, 大学院・システム情報科学研究院, 教授 (90127994)
IMASAK Kiminobu 九州産業大学, 工学部・電気情報工学科, 准教授 (40264072)
NAKANO Michihiko 九州大学, 大学院・システム情報科学研究院, 助教 (00447856)
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Project Status |
Completed (Fiscal Year 2010)
|
| Budget Amount *help |
¥18,720,000 (Direct Cost: ¥14,400,000、Indirect Cost: ¥4,320,000)
Fiscal Year 2010: ¥4,160,000 (Direct Cost: ¥3,200,000、Indirect Cost: ¥960,000)
Fiscal Year 2009: ¥4,940,000 (Direct Cost: ¥3,800,000、Indirect Cost: ¥1,140,000)
Fiscal Year 2008: ¥9,620,000 (Direct Cost: ¥7,400,000、Indirect Cost: ¥2,220,000)
|
|---|
| Keywords | 誘電泳動 / ナノ界面 / カーボンナノチューブ / ガスセンサ / バイオセンサ / 界面活性剤 / スピンカラム / 濾過 / エネルギー障壁 / 半導体カーボンナノチューブ / 自己組織化 / 界面 / パラジウムナノ粒子 / 水素センサ / 半導体ナノワイヤ |
|---|
| Research Abstract |
This project aimed to develop a new fabrication method of interfaces between various nano-sized material using dielectrophoresis, which can be applicable to new types of sensing devices. Interfaces between carbon nanotubes and biological cells, as well as between carbon nanotubes and catalytic metallic nano particles were successfully fabricated and applied to biosensor and chemical sensor.
|
Report
(4 results)
Research Products
(25 results)
