Development of new coating film having both high adhesion and high abrasive-wear-resistance for cutting tools
| Project/Area Number |
20560120
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Production engineering/Processing studies
|
|---|
| Research Institution | Nara National College of Technology |
|---|
Principal Investigator |
WADA Tadahiro Nara National College of Technology, 機械工学科, 教授 (10141912)
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Project Status |
Completed (Fiscal Year 2010)
|
| Budget Amount *help |
¥4,550,000 (Direct Cost: ¥3,500,000、Indirect Cost: ¥1,050,000)
Fiscal Year 2010: ¥1,040,000 (Direct Cost: ¥800,000、Indirect Cost: ¥240,000)
Fiscal Year 2009: ¥1,170,000 (Direct Cost: ¥900,000、Indirect Cost: ¥270,000)
Fiscal Year 2008: ¥2,340,000 (Direct Cost: ¥1,800,000、Indirect Cost: ¥540,000)
|
|---|
| Keywords | 切削 / 工具摩耗 / コーテッド工具 / 焼入れ鋼 / W系被膜 |
|---|
| Research Abstract |
In cutting, coated cemented carbide tools seem to be effective tool materials. TiN or (Ti, Al) N are generally used as the coating film. A titanium-tungsten based coating films have been developed. The titanium-tungsten based coating films exhibited a superior critical scratch load. However, the hardness of the titanium-tungsten based coating films were lower than that of (Ti, Al) N coating film. So, titanium-tungsten-silicon based coating films, namely (Ti, W, Si) N, (Ti, W, Si) C or (Ti, W, Si) (C,N) coating film, have been developed. These newly titanium-tungsten-silicon based coating films exhibit both superior critical scratch load and hardness as compared with TiN, (Ti, Al) N coating film.
|
Report
(4 results)
Research Products
(10 results)
