Project/Area Number |
22K20439
|
Research Category |
Grant-in-Aid for Research Activity Start-up
|
Allocation Type | Multi-year Fund |
Review Section |
0302:Electrical and electronic engineering and related fields
|
Research Institution | National Institute of Advanced Industrial Science and Technology |
Principal Investigator |
Nakajima Yuki 国立研究開発法人産業技術総合研究所, 計量標準総合センター, 研究員 (60965424)
|
Project Period (FY) |
2022-08-31 – 2024-03-31
|
Project Status |
Completed (Fiscal Year 2023)
|
Budget Amount *help |
¥2,860,000 (Direct Cost: ¥2,200,000、Indirect Cost: ¥660,000)
Fiscal Year 2023: ¥1,430,000 (Direct Cost: ¥1,100,000、Indirect Cost: ¥330,000)
Fiscal Year 2022: ¥1,430,000 (Direct Cost: ¥1,100,000、Indirect Cost: ¥330,000)
|
Keywords | SIトレーサブル / 光周波数コム / ミリ波 |
Outline of Research at the Start |
第6世代移動通信システム(6G)では300 GHz帯のミリ波の使用が検討されている。本研究は、その際に重要となるSIトレーサブルな周波数を持つミリ波発生技術に資するものである。ミリ波発生法として、300 GHz離れた2つの連続発振(CW)レーザーを用いた差周波発生がある。この際、2つのCWレーザーを光コムに位相同期し、光コムの周波数間隔を制御することで差周波数の制御が可能である。これまで、CWレーザーを何番目の光コムモードに位相同期したのかを表すコムモード次数の決定には、精密波長計測など複雑高価な補助測定が必要であった。そこで本研究では、正確かつ安価なコムモード次数決定法を提案・実証する。
|
Outline of Final Research Achievements |
By phase-locking two CW lasers with an optical comb synchronized to UTC, an accurate millimeter-wave band frequency can be synthesized in the form of a difference frequency. To determine the millimeter-wave band frequency, it is necessary to determine the mode number difference between the two comb modes which interfer CW lasers. This research aims to determine the mode number difference more easily than before by modulating the repetition frequency of the optical comb and measuring the modulation depth of the beat frequency of the optical comb and laser. In this study, the measurement accuracy of the modulation depth was verified, and a value close to the accuracy required for mode number difference determination was obtained.
|
Academic Significance and Societal Importance of the Research Achievements |
ミリ波・テラヘルツ波は、次世代移動通信に代表されるさまざまな分野への応用が期待されており、実用化にはUTCに基づいた正確な周波数合成が重要である。光コムを用いて周波数を合成する場合、従来は波長計等の高価な装置を用いた測定を元にミリ波帯・テラヘルツ帯周波数を決定する必要があり、その手順は複雑であった。本手法は周波数の決定にそうした補助測定を必要としないため、幅広い分野への寄与が期待される。
|