High Efficiency WPT System Using Hybrid Metasurface and Reactive Impedance Surface
Project/Area Number |
22KF0292
|
Project/Area Number (Other) |
21F51046 (2021-2022)
|
Research Category |
Grant-in-Aid for JSPS Fellows
|
Allocation Type | Multi-year Fund (2023) Single-year Grants (2021-2022) |
Section | 外国 |
Review Section |
Basic Section 21060:Electron device and electronic equipment-related
|
Research Institution | Kyushu University |
Principal Investigator |
Pokharel R.K. 九州大学, システム情報科学研究院, 教授 (60398568)
|
Co-Investigator(Kenkyū-buntansha) |
ALI MOHAMED 九州大学, システム情報科学研究院, 外国人特別研究員
|
Project Period (FY) |
2023-03-08 – 2024-03-31
|
Project Status |
Completed (Fiscal Year 2023)
|
Budget Amount *help |
¥2,200,000 (Direct Cost: ¥2,200,000)
Fiscal Year 2023: ¥400,000 (Direct Cost: ¥400,000)
Fiscal Year 2022: ¥600,000 (Direct Cost: ¥600,000)
Fiscal Year 2021: ¥1,200,000 (Direct Cost: ¥1,200,000)
|
Keywords | WPT system / hexagonal resonators / metamaterial / human phantom / Metamaterial / WPT / High Impedance Substrate |
Outline of Research at the Start |
Wireless charging of biomedical implants will make the life of patients with implants much easier. However, it is associated with significant design challenges - efficiency degradation and the need to meet standards for exposure to electromagnetic fields. In this proposal, we will introduce a novel metamaterial and HIS to improve the performance of the WPT system.
|
Outline of Annual Research Achievements |
In FY 2023, a novel WPT system for biomedical implants was developed. The proposed system consists of symmetric Tx and Rx. Each is composed a square ring resonator and a hexagonal resonator. This approach enhances the coupled magnetic field, as well as isolates the driver/load resistances. The proposed structure employs stacked metamaterials (MTM) between the Tx and Rx, with a near-zero permeability property acting as a lens to focus the magnetic coupled field at the Rx. This results in a significant improvement in system efficiency and an increase in transmission distance. A human phantom model is then used to test the design characteristics inside the tissue. The proposed WPT system provides a PTE of 49% at a transfer distance of 20mm with an embedded depth of 10mm inside the human tissue.
|
Report
(3 results)
Research Products
(5 results)