Development of Displacement Control Design Method
Project/Area Number |
23360239
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Field |
Building structures/materials
|
Research Institution | Tohoku University |
Principal Investigator |
INOUE Norio 東北大学, 工学(系)研究科(研究院), 名誉教授 (50250725)
|
Co-Investigator(Kenkyū-buntansha) |
IKAGO Kohju 東北大学, 大学院・工学研究科, 准教授 (20521983)
IKENAGA Masahiro 東北大学, 大学院・工学研究科, 助教 (50552402)
|
Project Period (FY) |
2011-04-01 – 2014-03-31
|
Project Status |
Completed (Fiscal Year 2013)
|
Budget Amount *help |
¥19,760,000 (Direct Cost: ¥15,200,000、Indirect Cost: ¥4,560,000)
Fiscal Year 2013: ¥5,070,000 (Direct Cost: ¥3,900,000、Indirect Cost: ¥1,170,000)
Fiscal Year 2012: ¥8,840,000 (Direct Cost: ¥6,800,000、Indirect Cost: ¥2,040,000)
Fiscal Year 2011: ¥5,850,000 (Direct Cost: ¥4,500,000、Indirect Cost: ¥1,350,000)
|
Keywords | 免震構造 / 変位制御設計 / ダンパー / 地震入力レベル / 多目的最適設計 / 連結機構摩擦ダンパー / MRダンパー / 回転慣性質量ダンパー / 同調粘性マスダンパー / 性能可変オイルダンパー / 振動実験 |
Research Abstract |
A new design strategy is required to achieve a higher performance seismic isolation system, which satisfies multiple design criteria for multiple earthquake input levels; a moderate input level as frequently experienced one, a severe input level as the design input level, and an extreme input level. This research work developed new energy dissipating devices that changes their control properties in direct response to isolator displacements, and proposed the "displacement design" strategies for seismic isolated buildings, which enabled more efficient displacement control of isolator displacement without increasing floor response accelerations in the superstructure.
|
Report
(4 results)
Research Products
(58 results)