Electrode Materials for Protonic Ceramic Fuel Cells
Project/Area Number |
23656478
|
Research Category |
Grant-in-Aid for Challenging Exploratory Research
|
Allocation Type | Multi-year Fund |
Research Field |
Metal making engineering
|
Research Institution | Kyoto University |
Principal Investigator |
UDA Tetsuya 京都大学, 大学院・工学研究科, 准教授 (80312651)
|
Project Period (FY) |
2011 – 2012
|
Project Status |
Completed (Fiscal Year 2012)
|
Budget Amount *help |
¥3,900,000 (Direct Cost: ¥3,000,000、Indirect Cost: ¥900,000)
Fiscal Year 2012: ¥1,820,000 (Direct Cost: ¥1,400,000、Indirect Cost: ¥420,000)
Fiscal Year 2011: ¥2,080,000 (Direct Cost: ¥1,600,000、Indirect Cost: ¥480,000)
|
Keywords | 各種製造プロセス / プロトン伝導体 / 中温型燃料電池 / 高効率水素製造 / 電気化学 / スマートグリッド |
Research Abstract |
We investigated electrode materials for protonic ceramic fuel cells. For anode materials, electroless-plating process of nickel on barium zirconate was established. But the performance was much lower than that of Pd-plated electrode. A technique for increasing surface area using acrylic beads was also investigated.In addition, water content in BaBa_<0.5>Sr_<0.5>Co_<0.8>Fe_<0.2>O_<3-d> was measured to find mix conductor of proton and hole.
|
Report
(3 results)
Research Products
(7 results)