| Project/Area Number |
23KF0107
|
|---|
| Research Category |
Grant-in-Aid for JSPS Fellows
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 外国 |
|---|
| Review Section |
Basic Section 21030:Measurement engineering-related
|
|---|
| Research Institution | The University of Tokyo |
|---|
Principal Investigator |
J・J Delaunay 東京大学, 大学院工学系研究科(工学部), 准教授 (80376516)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
XING DI 東京大学, 大学院工学系研究科(工学部), 外国人特別研究員
|
|---|
| Project Period (FY) |
2023-07-26 – 2026-03-31
|
| Project Status |
Granted (Fiscal Year 2023)
|
| Budget Amount *help |
¥3,000,000 (Direct Cost: ¥3,000,000)
Fiscal Year 2025: ¥100,000 (Direct Cost: ¥100,000)
Fiscal Year 2024: ¥1,400,000 (Direct Cost: ¥1,400,000)
Fiscal Year 2023: ¥1,500,000 (Direct Cost: ¥1,500,000)
|
|---|
| Keywords | metasurface / emission / polarization |
|---|
| Outline of Research at the Start |
An optical functional structure sustaining coherent chiral light emission at a low threshold of energy is proposed, fabricated, and characterized. The proposed structure is applied in a chiral detection scheme for use in chiral molecules pharmaceutical research.
|
| Outline of Annual Research Achievements |
Structures that support a bound-state-in-the-continuum (BIC) lasing mode on a photonic crystal were designed by simulation. These structures made of dielectric materials were patterned into nanocylinder arrays to support a resonance mode with a high-quality factor (quasi-BIC mode). Solution-processed quantum dots (QDs) were integrated on top of the nanocylinder array to form an isolated cavity. Due to the existence of side edges, the lasing mode is better confined within the cavity and shows lower scattering losses in the lateral direction. In summary, a single-mode BIC laser using CsPbBr3 QDs having a narrow linewidth of around 0.1 nm and a small footprint (10 × 10 μm^2) was demonstrated. This lasing structure is the smallest among the existing solution-processed BIC laser.
|
| Current Status of Research Progress |
Current Status of Research Progress
2: Research has progressed on the whole more than it was originally planned.
Reason
Cavity structures supporting BIC lasing mode have been designed. Direct fabrication of well-defined patterns of quantum dots (QDs) via a solution process was proposed to take advantage of the pattern edges to reduce losses through the cavity edges. A miniaturized BIC laser (10 × 10 μm^2) with a low threshold has been demonstrated. The results were published in Advanced Functional Materials a leading journal in the field of nanotechnology.
|
| Strategy for Future Research Activity |
We will break the symmetry of the employed nanostructures to produce a high Q factor chiral lasing emission. For this purpose, simulations and experimental verifications will be used to design and optimize the chiral structure. To characterize the experimental result, an angle-resolved spectrometer will be built. This setup can characterize the polarization properties of the far field emission in off normal direction. Finally, a chiral emission with a high Q factor will be demonstrated.
|
