In-situ Observation of Frictional Area by Ultra High Speed and Long Period Observation System
Project/Area Number |
24686022
|
Research Category |
Grant-in-Aid for Young Scientists (A)
|
Allocation Type | Partial Multi-year Fund |
Research Field |
Design engineering/Machine functional elements/Tribology
|
Research Institution | Kyushu University |
Principal Investigator |
YAGI Kazuyuki 九州大学, 工学(系)研究科(研究院), 准教授 (50349841)
|
Project Period (FY) |
2012-04-01 – 2015-03-31
|
Project Status |
Completed (Fiscal Year 2014)
|
Budget Amount *help |
¥18,460,000 (Direct Cost: ¥14,200,000、Indirect Cost: ¥4,260,000)
Fiscal Year 2014: ¥3,250,000 (Direct Cost: ¥2,500,000、Indirect Cost: ¥750,000)
Fiscal Year 2013: ¥7,410,000 (Direct Cost: ¥5,700,000、Indirect Cost: ¥1,710,000)
Fiscal Year 2012: ¥7,800,000 (Direct Cost: ¥6,000,000、Indirect Cost: ¥1,800,000)
|
Keywords | トライボロジー / その場観察 / 焼付き / 摩耗粉 / 塑性流動 / 撮影システム / 摩耗 / 表面分析 |
Outline of Final Research Achievements |
The objective of this study is to develop an in situ observation system for frictional areas that could capture at a high frame rate for long time. The developed observation system is used for observing instantaneous phenomena such as wear debris generation, plastic flow behavior and occurrence of scuffing. The developed observation system comprises of four CCD camera and flashing light. The observation system controls independently the capturing timing of each camera to succeed in increasing the frame rate of four capturing images. Plastic flow behavior during scuffing can clearly be observed by the present observation system. The plastic flow speed increased with increasing sliding speed. However, the plastic flow speed was more than one-digit smaller than the sliding speed.
|
Report
(4 results)
Research Products
(3 results)