Project/Area Number |
25600039
|
Research Category |
Grant-in-Aid for Challenging Exploratory Research
|
Allocation Type | Single-year Grants |
Research Field |
Nanomaterials engineering
|
Research Institution | Kyoto University |
Principal Investigator |
TSUJI Nobuhiro 京都大学, 工学(系)研究科(研究院), 教授 (30263213)
|
Project Period (FY) |
2013-04-01 – 2014-03-31
|
Project Status |
Completed (Fiscal Year 2013)
|
Budget Amount *help |
¥4,030,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥930,000)
Fiscal Year 2013: ¥4,030,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥930,000)
|
Keywords | ナノ結晶 / 超微細粒金属 / 再結晶 / 圧延 / 巨大ひずみ加工 / 力学特性 / 強度 / 延性 / 変形 / 転位 / 粒成長 / 塑性不安定 / 強加工 |
Research Abstract |
The purpose of this experimental study was to obtain fully-recrystallized nano structures having mean grain sizes much smaller than 1 um in various metallic alloys. Fully-recrystallized nano crystals were successfully obtained by simple cold-deformation and annealing processes in Fe-31Mn-3Al-3Si, Fe-22Mn-0.6C, Cu-6.8Al (mass%) and some high entropy alloys. All alloys showing fully-recrystallized nano structures exhibited both high strength and large tensile elongation at room temperature.
|