A multi-objective life-cycle design support system for Improving Performance and CO2 Savings at the early phase of design
Project/Area Number |
26870628
|
Research Category |
Grant-in-Aid for Young Scientists (B)
|
Allocation Type | Multi-year Fund |
Research Field |
Social systems engineering/Safety system
Design engineering/Machine functional elements/Tribology
|
Research Institution | Meiji University |
Principal Investigator |
Inoue Masato 明治大学, 理工学部, 専任准教授 (60365468)
|
Project Period (FY) |
2014-04-01 – 2017-03-31
|
Project Status |
Completed (Fiscal Year 2016)
|
Budget Amount *help |
¥4,030,000 (Direct Cost: ¥3,100,000、Indirect Cost: ¥930,000)
Fiscal Year 2016: ¥520,000 (Direct Cost: ¥400,000、Indirect Cost: ¥120,000)
Fiscal Year 2015: ¥1,170,000 (Direct Cost: ¥900,000、Indirect Cost: ¥270,000)
Fiscal Year 2014: ¥2,340,000 (Direct Cost: ¥1,800,000、Indirect Cost: ¥540,000)
|
Keywords | ライフサイクル設計 / 多目的設計支援 / 環境負荷削減 / 初期設計段階 / セットベース設計 / 設計工学 / 設計支援システム / 環境配慮設計 / 多目的満足化 / エージェント技術 / CAD |
Outline of Final Research Achievements |
Preplanning the life cycle options for each part of a product and evaluating the environmental loads of the product at the early phase of design by applying 3D-CAD lead to resource recycling and significant reductions in the environmental loads for the whole product life cycle. The early phase of design contains multiple sources of uncertainties. This paper proposes a life cycle design support system based on 3D-CAD, which enables a sat-isficing design for both the product performances and the reduction of the environmental loads. The proposed system supports to define the life cycle options and to obtain multi-satisfactory design solution sets by applying a preference set-based design method, which enables a flexible and robust design under various sources of un-certainties. The present study applies the proposed system to a multi-objective problem for technical and envi-ronmental performance requirements as an example problem, that is, a cleaner model created by 3D-CAD.
|
Report
(4 results)
Research Products
(49 results)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
[Presentation] A Case Study in Quantitative Estimation of the CO2-Emissions Reduction from 50 Major Reuse Parts for Japanese Automobile based on Data of Vehicle Inspection Certificate2016
Author(s)
Masato Inoue, Sota Takahashi, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Junji Sugimoto, Katsumi Ishizuka, Katsumi Oppata, Shigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani and Akihiro Hayakawa
Organizer
The 12th Biennial International Conference on EcoBalance (EcoBalance 2016)
Place of Presentation
Kyoto
Year and Date
2016-10-03
Related Report
Int'l Joint Research
-
-
[Presentation] Reliability Engineering in face of Shorten Product Life Cycles: Challenges, Technique Trends and Method Approaches to Ensure Product Reliability2016
Author(s)
Stefan Bracke, Simon Kutz, Masato Inoue, Hanno Gottschalk, Marcin Hinz, Edoardo Patelli, Christoph Hartl, Berna Ulutas, Pasacal Bonnaud, and Peter Moers
Organizer
European Safety and Reliability (ESREL 2016)
Place of Presentation
Glasgow
Year and Date
2016-09-25
Related Report
Int'l Joint Research
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
[Presentation] Environmental Load Evaluation of Reuse Parts for Automobiles2014
Author(s)
Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Akihiko Sasaki, Motohiro Tamaki, Akihiko Sano, Hironori Tani, Akihiro Hayakawa and Masato Inoue
Organizer
The 3rd International Conference on Design Engineering and Science (ICDES2014)
Place of Presentation
Pilsen, CZECH
Year and Date
2014-08-31 – 2014-09-03
Related Report
-
-
-
-
-
-
-
-