1990 Fiscal Year Final Research Report Summary
Development of "Dynamic Crack Microscope"
| Project/Area Number |
01850025
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research (B).
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
材料力学
|
|---|
| Research Institution | Research Center for Advanced Science and Technology, University of Tokyo |
|---|
Principal Investigator |
KISHI Teruo RCAST, Robotics, Professor, 先端科学技術研究センター, 教授 (40011085)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
OHARA Yoshinobu Sekisui Plastics Co., Ltd, Central Research Lab. Chief Engineer, 中央研究所セラミックス研究室, 研究員
INABA Hidehiro Fuji Ceramic Co., Ltd, Manufacture engineer, 生産部生産二課, 研究員
SHIWA Mitsuharu RCAST Advanced Materials, Research Associate, 先端科学技術研究センター客員研究員, 助手
ENOKI Manabu RCAST, Robotics, Research Associate, 先端科学技術研究センター, 助手 (70201960)
TAKEDA Nobuo RCAST, Robotics, Associate Professor, 先端科学技術研究センター, 助教授 (10171646)
|
|---|
| Project Period (FY) |
1989 – 1990
|
| Keywords | Acoustic Emission / AE source characterization / Low noise & high sensitivity sensor / Digital signal processor / Parallel processing / Pipe line processing / High resolution location |
|---|
| Research Abstract |
A high sensitivity and low noise integrated acoustic emission sensor has been successfully developed to detect microcrack. This sensor is designed by both the piezoelectric element vibration mode and the electric circuit of first stage amplifier which minimizes by eliminating the signal loss and noise. This sensor is sold from the cooperative company of this project.
AE data acquisition and analysis system have been also successfully developed. The high speed data acquisition system consists of the analog to digital converter (8bit/20MHz/6ch), the multi processing digital signal processors of each AE channel, the pipe line signal processing using digital signal processor for AE source location and the host personal computer (80386SX/80387SX) to display and analyze data. The system capability is as follows : the data acquisition speed with 6ch is 70 events/sec, the maximum number of storage events are 7000, the resolution of source location is a few hundred micron meter, the calculation time of source characterization is less than one second each event. This system will be on sale from the cooperative company as "Dynamic Crack Microscope".
Preliminary AE tests were carried out for ceramic materials and this Dynamic Crack Microscope has demonstrated great potential for the investigation of fracture mode of each micro crack and fracture mechanism in the fiber reinforced composite materials.
|
Research Products
(16 results)
