1992 Fiscal Year Final Research Report Summary
Forming Robot for Artificial Organ Components
| Project/Area Number |
02555052
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
機械力学・制御工学
|
|---|
| Research Institution | Waseda University |
|---|
Principal Investigator |
TSUCHIYA Kiichi Waseda University, Professor, 理工学部, 教授 (70063469)
|
|---|
| Project Period (FY) |
1990 – 1992
|
| Keywords | Soft Solid Model / Robot Arm / Silicone Rubber / Building a Nest |
|---|
| Research Abstract |
Considering the method to form various models conveniently, many methods of forming were tried and developed. But monolithic forming of complex structures was exceedingly difficult. It was necessary to introduce a new system of forming, efficient, inexpensive and convenient. To improve such conditions, we proposed a unique method on the formation of a solid model by stacking cross-sectional layers without a mold.Each layer was fabricated b y extrusion of the fluid material ( silicone rubber ) by using dispenser system. Dispenser was manipulated by the robot arm controlled by a computer. To stack a bit steadily, the angle of extruding was controlled by the forming stage. T o form an unstable model, setting the forming stage upper and extruding from lower to upper ( stacking a layer downward ), we named that " Downward Formation ".In case that a solid model had a stable cross section to form, by inclination g the forming stage, considering that plane as a cross section for extruding, we named that " Stable Plane Formation ". This system improved efficiency in forming various models.
|
Research Products
(6 results)
