1991 Fiscal Year Final Research Report Summary
Production of high energy density plasma by inductive energy sturage Pulsed Power Generator
| Project/Area Number |
02680013
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
プラズマ理工学
|
|---|
| Research Institution | Kumamoto University |
|---|
Principal Investigator |
AKIYAMA Hidenori Kumamoto Univ. Dept. of Engineering Associate, 工学部, 助教授 (50126827)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MAEDA Sadao Kumamoto Univ. Dept of Engineering Prof., 工学部, 教授 (10040370)
|
|---|
| Project Period (FY) |
1990 – 1991
|
| Keywords | Plasma / Pulsed power / Inductive energy storage / High energy density / Gas-puff 2-pinch / Soft x-ray / Pinch |
|---|
| Research Abstract |
The productions of the high temperature and high density plasmas with 10^<20>/cm^3 and several key become possible by the development of pulsed power technology, because the extremely high power over 100GW can be supplied into the plasma. The applications of high energy density plasmas cover the wide fields such as soft x-ray and neutron sources, x-ray lasers, charged particle beam sources, accelerators and et al. .
The conventional pulsed power generators, which consist of the Marx bank and the water capacitor have been used as the electric source for the production of high energy density plasma. However, since these pulsed power generators are large, heavy and expensive, it was very difficult to mount and maintain-except the institutes. Therefore, the number of researchers is limited.
The aim of this research is to show that the light-weight and compact pulsed power generator using the inductive energy storage can be used to produce the high energy density plasma. The gas-puff 2-pinch plasma is used as the load of the pulsed power generator. The inductive energy storage pulsed power generator, ASO-II, which was developed at Kumamoto university, is used here. The soft x-ray from the high energy density plasma is compared between the cases with and without the opening switches. The ASO-II with the opening switch produces the current with faster rise time than ASO-II without it. The intensity of soft x-ray from the high energy density plasma was larger in the case using the current with the faster rise time, even though the current was smaller at the tine when the soft x-ray was produced. Therefore, the inductive energy storage pulsed power generator is effective to produce the high energy density plasmas.
|
