1992 Fiscal Year Final Research Report Summary
Preparation and characterization of polyaniline as cathode material of rechargeable battery in nonaqueous electrolyte
| Project/Area Number |
03453086
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
工業物理化学・複合材料
|
|---|
| Research Institution | KYOTO UNIVERSITY |
|---|
Principal Investigator |
TAKEHARA Zen-ichiro Department of Industrial Chemistry, Faculty of Engineering, Professor, 工学部, 教授 (00025892)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
UCHIMOTO Yoshiharu Department of Industrial Chemistry, Faculty of Engineering, Instructor, 工学部, 助手 (50193909)
KANAMURA Kiyoshi Department of Industrial Chemistry, Faculty of Engineering, Instructor, 工学部, 助手 (30169552)
OGUMI Zenpachi Department of Industrial Chemistry, Faculty of Engineering, Professor, 工学部, 教授 (60110764)
|
|---|
| Project Period (FY) |
1991 – 1992
|
| Keywords | Polyaniline / Aniline / Rechargeable Lithium Battery / Non-aqueous Solvent / Electropolymerization / Diffusion / Tetrafluoroborate / Discharge and Charge Characteristics |
|---|
| Research Abstract |
The new method for the electropolymerization of aniline was developed in order to improve the discharge and charge characteristics of the nonaqueous battery with polyaniline cathode. Polyaniline has been prepared using the electropolymerization in acidic aqueous media. This preparation method is very convenient to obtain the active polyaniline. However, the prepared polyaniline was partly oxidized and included a large amount of water. These properties are not suitable for the cathode material of nonaqueous battery. In this study, the electropolymerization of aniline using nonaqeous electrolyte was performed. From the reaction mechanisms, the proton source is necessary to obtain the active polyaniline. However proton dose not exist in an aprotic solvent. In this study, aniline tetrafluoroborate (ATFB) was used as an starting material. In this case, both aniline and proton are supplied to the electrolyte, simultaneously. The galvanostatic electropolymerization of aniline in the electrolyte containing ATFB was conducted. The polyaniline was obtained on the electrode, that was confirmed by FT-IR spectra. The electrochemical activity of the prepared polyaniline was slightly better than that of polyaniline prepared in aqueous solution. However, at high discharge current, the discharge capacity of polyaniline prepared in nonaqueous solution was smaller than that prepared in aqueous solution. This fact may be due to the difference in the morphology of polyaniline. The morphology of polyaniline depends the kind of solvent. When acetnitrile was used as a solvent, polyaniline having the fibril structure was obtained. The electrochemical activity was better than polyaniline prepared in aqueous solution even at high discharge current.
|
Research Products
(2 results)
