1993 Fiscal Year Final Research Report Summary
Developing of Scanning Photoacoustic Microscope
| Project/Area Number |
03555090
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
計測・制御工学
|
|---|
| Research Institution | KANAZAWA TECHNICAL COLLEGE |
|---|
Principal Investigator |
TOKUNAGA Yoshiaki Kanazawa Technical College, Department of Electrical Engineering, Professor, 電気工学科, 教授 (00072174)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MINAMIKAWA Toshiharu Industrial research Institute of ISHIKAWA Researcher, 機械電子部, 研究員
SENTOKU Eiichi Kanazawa Technical College, Department of Mechanical Engineering, Professor, 機械工学科, 教授 (20154677)
|
|---|
| Project Period (FY) |
1991 – 1993
|
| Keywords | PHOTOACOUSTIC EFFECT / SCANNING PHOTOACOUSTIC MICROSCOPE / EPOXY RESIN / BACKING MATERIAL / THERMAL WAVE / He-Ne LASER / Ar ION LASER |
|---|
| Research Abstract |
We developed the hardware and software of scanning photoacoustic microscope(SPAM) composed of low price parts. We found that our SPAM could be used well to understand fundamental characteristics of a surface flaw on machinable ceramic, surface and subsurface flaws in epoxy and the distribution of carbon fiber in the CFRP as an equipment of nondestructive testing.
Amplitude and phase of a photoacoustic signal generated from an epoxy resin on various backings(aluminum, white acrylic resin and black-coated white acrylic resin) were measured by this SPAM.
The experimental results were as follows.
The photoacoustic signals for light-reflective backings were generated from the epoxy resin on the backing, while photoacoustic signals for light-absorptive backing were generated from the backing itself. We proposed a "model for PA imaging of" a drilled hole in the epoxy resin sample.
|
Research Products
(20 results)
