1993 Fiscal Year Final Research Report Summary
Real-time Estimation of Thermal Deformation of Machine Tool by Using Duhamel's Theorem
| Project/Area Number |
04452127
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
機械工作
|
|---|
| Research Institution | Tokyo University of Agriculture & Technology |
|---|
Principal Investigator |
NISHIWAKI Nobuhiko Tokyo Univ. of Agri. & Tech., Faculty of Tech. Professor, 工学部, 教授 (90016626)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MOTIZUKI Sadanari Tokyo Univ. of Agri. & Tech., Faculty of Tech. Professor, 工学部, 教授 (10013715)
|
|---|
| Project Period (FY) |
1992 – 1993
|
| Keywords | Machine tool structure / Duhamel's Theorem / Thermal deformation and / or distortion / Heat transfer coefficient / Thermal contact resistance |
|---|
| Research Abstract |
In this paper, a new method is thought out to estimate the thermal deformation and/or distorition caused by the inner and outer heat sources by using Duhamel's theorem. In this method, it is needed to measure the heat transfer coefficient on the structure surface, the thermal contact resistance between the guideways, and the power of heating the machine tool structure. In this study, the floowing results are obtained. (1)The heat transfer coefficient on the structure surface can be obtained by attaching the metal foil or thermal insulator and measuring the temperature of them. (2)The thermal contact resistance between the guideways can be measured utilizing ultrasonics. (3)The power of heating the machine tool structure can be obrained by using Duhamel's theorem. (4)The thermal deformation and/or distortion of machine tool structure can be obtained by superposing until thermal deformation and/or distortion.
|
