• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

1994 Fiscal Year Final Research Report Summary

EFFECT OF MAGNETIC PRESSURE ON THE INITIAL STAGE OF SOLIDIFICAION OF MOLTEN METAL

Research Project

Project/Area Number 04555162
Research Category

Grant-in-Aid for Developmental Scientific Research (B)

Allocation TypeSingle-year Grants
Research Field 金属加工(含鋳造)
Research InstitutionNAGOYA UNIVERSITY

Principal Investigator

ASAI Shigeo  NAGOYA UNIVERSITY,ENGINEERING PROFESSOR, 工学部, 教授 (80023274)

Co-Investigator(Kenkyū-buntansha) NISHIOKA Shinichi  NIHONKOUKAN CO., LTD.RESARCHER, 総合材料研究所, 統括スタッフ
NAKATA Masasi  NIHONKOUKAN CO., LTD.RESARCHER
Project Period (FY) 1992 – 1994
KeywordsOscillation marks, / Continuously casting, / Surface quality of cast metal, / Soft contacting solidification, / Magnetic pressure, / Electromagnetic processing of materials, / Process metallurgy,
Research Abstract

In order to improve of the surface quality of continuously cast steels, a continuous caster with high frequency magnetic field applied from the outside of the mold has newly been developed. In a continous casting mold with imposition of the magnetic field the meniscus motion of a molten galliumused as a simultor of a molten steel was measured by a laser level senor. Moreover, a molten tin, used as another simulator was continuously cast into the mold with imposition of the magnetic field, and new functions created by the magnetic field were studied from the vied point of the control ofinitial solidification in continuously cast metals.
It is found that the surface quality of the continuously cast tin can be drastically improved by use of the magnetic field, i.e. the intermittent high frequency magnetic field can produce a smooth surface. It is noticed that the surface quality of continuously cast metals depends on the period and the timing of imposing the magnetic field in a cycle of mold oscillation. The amount of electric current required to get the same surface quality decreases in the oprder of the imposiotion of thecontinuous and the intermittent magnetic fields and the synchronized imposition of it.

  • Research Products

    (18 results)

All Other

All Publications (18 results)

  • [Publications] 佐々健介ら: "交流磁場印加連鋳モ-ルドにおける鋳片の表面性状に及ぼすメニスカス挙動" 鉄と鋼. 79. 1075-1081 (1993)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 李延挙ら: "磁場を印加した連鋳鋳型における溶湯波動挙動" 鉄と鋼. 79. 1260-1265 (1993)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] T. Li et al: "Control of Initial Solidification in Continuous Casting by Imposing a High Frequency Magnetic Field from the Outsidc of a Mold." U. S. -Jap. coop. Sci. Prog. Seminar on 'Solidification proc. for the 21STcent. 'Lenox, Mass. , U. S. A. ,. 213-224 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] T. Li et al: "Dynamic meniscus Behavior in Continuous Casting Mold with Intermittent High Frequency Magnetic Field and Surface Quality of Products." Int. Symp. on Elec. mag. Proc. of Mat. (EPM'94) Nagoya, Japan. Oct. 25-28. 242-247 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] T. Li et al: "Stydy of Meniscus Behavior and Suface Properties durinmg Casting in a High Frequency Magnetic Field" Metallurgical Transaction B. 26B. in press (1995)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] T. Li et al: "Improvement of Surface Quality of Continuously Cast Metals by Imposing Intermittent High Frequency Magnetic Field from Outside of a Mold," The 2nd. Pacific Rim Int. Conf. on Advanced Mat. and Proc. , Kyongiu Korea, Jun. 1955. (1995)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] Kensuke Sassa, Tingju Li, Shigeo Asai :"Dynamic Meniscus Behavior Influencing on Surface Condition of Products Cast in Continuous Caster with Alternating Magnetic Field Applied from the Outsideof a Mold." TETSU-TO-HAGANE. Vol.79, No.9. 1075-1081 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Wave Behavior of Melt in a Continuous Casting Mold with Imposition of Magnetic Field." TETSU-TO-HAGANE. Vol.79, No.10. 1260-1265 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Shiniji Nagaya, Kensuke Sassa, Shigeo Asai :"Stydy of Meniscus Behavior and Suface Properties durinmg Casting in a High Frequency Magnetic Field." Metallurgical Trans-action B. 26B (in press). (1995)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Control of Initial Solidification in Continuous Casting by Imposing a High Frequency Magnetic Field from the Outside of a Mold." U.S.Jap.coop.Sci.prog.Seminar on 'Solidification proc. for the 21STcent.' Lenox, Mass., U.S.A. 213-224 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Dynamic meniscus Behavior in continuous Casting Mold with Intermittent High Frequency Magnetic Field and Surface Quality of Products." Int.Symp.on Elec.mag.Proc.of Mat. (EPM'94) Nagoya, Japan.OCT.25-28. 242-247 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Improvement of Surface Quality of Continuously Cast Metals by Imposing Intermittent High Frequency Magnetic Field from Outside of a Mold" The 2nd.Pacific Rim Int.Conf.on Advanced Mat.and Proc., Kyongiu Korea, Jun.(1995)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Wave Behavior of Melt in a Continuous Casting Mold Applying Magnetic Field" Current Advances in Materials and Processes. Vol.5. 3 (1992)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Kensuke Sassa, Tingju Li, Shigeo Asai :"Effect of Applied Magnetic Field on the Meniscus Behaviuor in a Continuous Casting" Current Advances in Materials and Processes. Vol.5. 4 (1992)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Effect of Imposition of High Frequency Magnetic Field on the State of Molten Metal Pool." Current Advances in Materials and Processes. Vol.6. 4 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"A Direct Observation of Behavior of Melt Meniscus in a Mold with Imposition of High Frequency Magnetic Field" Current Advances in Materials and Processes. Vol.6. 1127 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Shinji Nagaya, Kensuke Sassa, Shigeo Asai :"Effect of Imposition of High Frequency Magnetic Field on Meniscus Behavior in a Continuous Casting Mold." Current Advances in Materials and Processes. Vol.7. 15 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Tingju Li, Kensuke Sassa, Shigeo Asai :"Improvement of Surface Quality of Cast Metal by Synchronizing Imposition of Intermittent High Frequency Magnetic Field with Mold Oscillation." Current Advances in Materials and Processes. Vol.7. 900 (1994)

    • Description
      「研究成果報告書概要(欧文)」より

URL: 

Published: 1996-04-15  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi