• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

1994 Fiscal Year Final Research Report Summary

Development of 150 kJ Pulsed Power Generator using Inductive Energy Storage

Research Project

Project/Area Number 04558004
Research Category

Grant-in-Aid for Developmental Scientific Research (B)

Allocation TypeSingle-year Grants
Research Field プラズマ理工学
Research InstitutionKumamoto University

Principal Investigator

AKIYAMA Hidenori  Kumamoto University Engineering, Professor, 工学部, 教授 (50126827)

Co-Investigator(Kenkyū-buntansha) KATSUKI Sunao  Kumamoto University Engineering, Research Associate, 工学部, 助手 (80233758)
MAEDA Sadao  Kumamoto University Engineering, Professor, 工学部, 教授 (10040370)
Project Period (FY) 1992 – 1994
KeywordsPULSED POWER / INDUCTIVE ENERGY STORAGE / OPENING SWITCH / FUSE / PLASMA OPENING SWITCH / CLOSING SWITCH / HIGH VOLTAGE / HIGH CURRENT
Research Abstract

The pulsed power technology is growing as one of important basic technologies, which are related to free electron lasers, x-ray lasers, x-ray microscope, nuclear fusion, high power microwave and so on. The aim of this research is to develop the 150kJ pulsed power generator, which is compact, light-weight and economical. The obtained results are summarized as follows ;
(1) The experiments were carried out to generate a extremely high voltage. The Marx bank with the total capacitance of 25nF and the output voltage of 400kV is connected with a coil of 3.3mH and a copper wire of 60 cm in length and 0.03 mm in diameter. The voltage calculated from the obtained current waveform reached 20MV.
(2) The 150kJ capacitor bank was fabricated. Its bank was charged within 20 second by the electric power source of 8kJ/s.
(3) The risetime of several ten's ns was achieved by the plasma opening switch using a laser-produced plasma.
(4) Though the plasma flow switch can control the conduction time, the matching with load was difficult.
(5) Both the conduction and opening times were able to controlled by a combination of copper fuse and plasma opening switch as two-staged opening switch.

  • Research Products

    (12 results)

All Other

All Publications (12 results)

  • [Publications] 秋山 秀典: "パルスパワー高度利用技術" 電気学会誌. 115. 164-169 (1995)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 下村 直行: "オープニングスイッチとしての水中銅線ヒューズの抵抗変化" 電気学会論文誌. 115-A. (1995)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 下村 直行: "自己積分型ロゴスキーコイルの共振特性" 電気学会論文誌. 114-B. 33-37 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] K,Takasugi: "X-ray Generation from a Gas-Puff Z-Pinch by a Pulsed Power Generator with a Self-Crowbar Switch" Rev.Sci.Instrum.64. 2403-2404 (1993)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 秋山 秀典: "パルスパワー発生技術" プラズマ・核融合学会誌. 69. 192-196 (1993)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] T.Fukuzawa: "Plasma Erosion Opening Switch Using Lasar-Produced plasma" IEEE Trans.on Plasma Science. 20. 447-451 (1992)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] H.Akiyama: "Pulsed Power Application Technology" Transaction of IEE Japan. Vol.115. 164-169 (1995)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] N.Shimomura, M.Nagata and H.Akiyama: "Resistance Change of Copper Fuses in Water as Opening Switches" Transaction of IEE Japan. Vol.115-A. (1995)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] N.Shimomura, M.Nagata and H.Akiyama: "Resonance Characteristics of Self-Integrating Rogowski Coils" Transaction of IEE Japan. Vol.114-B. 33-37 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] K.Takasugi, H.Akiyama, at al: "X-Ray Generation from a Gas Puff Z-Pinch by a Pulsed Power Generator with a Self-Crowbar Switch" Rev.Sci.Instrum.Vol.64. 2403-2404 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] H.Akiyama: "Technology of Pulsed Power Generator" Journal of Plasma and Fusion Research. 192-196 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] T.Fukuzawa, S.Ihara, S.Maeda and H.Akiyama: "Plasma Erosion Opening Switch Using Laser-Produced Plasma" IEEE Trans.on Plasma Science. Vol.20. 447-451 (1992)

    • Description
      「研究成果報告書概要(欧文)」より

URL: 

Published: 1996-04-15  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi