1993 Fiscal Year Final Research Report Summary
Research on development of a high qualoty digital recorder for impulse measurements and the performance test methods
| Project/Area Number |
04650249
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
電力工学
|
|---|
| Research Institution | Nippon Institute of Technology |
|---|
Principal Investigator |
HARADA Tatsuya Nippon Institute of Technology, Ultra High Voltage Research Center, Professor, 工学部・超高圧放電研究センター, 教授 (10183568)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
SAEKI Masamori Nippon Institute of Technology, Ultra High Voltage Research Center, Assistant Pr, 超高圧放電研究センター, 助教授 (40049713)
TAKAHASHI Hisao Sony/Tektronix Corporation, System Product Design Engineering, Chief, テクトロニクス株式会社・第二開発部, デザインリーダ
|
|---|
| Project Period (FY) |
1992 – 1993
|
| Keywords | Digital recoder / Reference measuring system / Impulse test / Calibration / Internal noise / Performance test / Pulse generator / Interference |
|---|
| Research Abstract |
(1) By improving a 10 bit, 200MS/s digital recorder for general purposes, a high quality degital recorder which has satisfied the requirements on non-linearities of amplotude and time base, impulse scale factor, internal noise level, interferance and so on of International Standard (IEC) 1083-1. "Digital recorders for measurements in high-voltage impulse tests."
(2) A calibration pulse generator for digital recorders was developped. the generator is enable to generate full, copped lightning and switching impulse voltages specified in IEC 1083-1. The accuracies of of their peak values and time parameters are satisfied the requirements of IEC 1083-1.
Influence of the internal noise of digital recorders on the measuring accuracy was charified by computor simulation in detail. In order to eliminate the measuring errors due to the internal noise, new correction methods were proposed. The method increased remarkably the measuring accuracy of digital recorders for lightning and switching impulse voltages.
High quality reference measuring systems for impulse voltages and currents have been developped by connecting the digital recorder mentioned above to reference voltage diveders and current shunts developped by autors in 1991.
|
Research Products
(8 results)
