• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to project page

1994 Fiscal Year Final Research Report Summary

Study on Fabrication of 3D Modeling by Photo-Hardening Process based on 3D Shape Measurement Data

Research Project

Project/Area Number 05650108
Research Category

Grant-in-Aid for General Scientific Research (C)

Allocation TypeSingle-year Grants
Research Field 機械工作・生産工学
Research InstitutionTokyo University of Agriculture and Technology

Principal Investigator

YOSHIZAWA Toru  Tokyo University of Agriculture and Technology, Faculty of Technology, Professor, 工学部, 教授 (80020387)

Co-Investigator(Kenkyū-buntansha) OTANI Yukitoshi  Tokyo University of Agriculture and Technology, Faculty of Technology, Research, 工学部, 助手 (10233165)
Project Period (FY) 1993 – 1994
KeywordsOptical Lithography / Resin model / Three-dimensional shape measurement / Photo-hardening resin / Hardening analysis / Reverse engineering
Research Abstract

The purpose of this research is to establish the 3D shape measurement without contact for the 3D resin modeling and solid modeling by photo-hardening resin.
Two methods of surface profile measurement such as the moiretopography using frequency modulation and the grating projection method by one-step phase shifting are proposed. As these methods have high speed measurement and high sensitivity, they are very useful for 3D resin modeling.
Moreover this research work is succeed to analyze the hardening process in photo-hardening resin. Two method are applied for this analysis. One is the refractive index distribution measurement by CT method. The other is the birefringence distribution measurement by phase shifting technique to analyze the residual stress occurred in the hardening process. By these method, the optimum condition for the photo-hardening process is determined.
The 3D shape measurement without contact for 3D resin modeling and solid modeling by photo-hardening resin are succeed This project has gotten excellent result for the reverse engineering

  • Research Products

    (16 results)

All Other

All Publications (16 results)

  • [Publications] 大谷幸利: "光硬化性樹脂の硬化過程の解析(II)-屈折率分布時間変化の測定-" 精密工学会秋季学術講演会講演論文集. 551-552 (1993)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 大谷幸利: "光硬化性樹脂の硬化過程の解析(III)-内部ひずみ分布の測定-" 精密工学会春季学術講演会講演論文集. 583-584 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 吉澤徹: "周波数変調による縞走査法-第1報・モアレ計測への応用-" 精密工学会春季学術講演会講演論文集. 795-796 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] Y.Otani: "Two-dimensional Birefringence Measurement using the Phase Shifting Technique" Optical Engineering. 33. 1604-1609 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] R.Gu: "One-step phase shift 3-D surface profilometry with grating projection" Optics and Lasers in Engineering. 21. 61-75 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 田中康司: "ワンステップ位相シフト法を用いた三次元計測" 光計測シンポジウム講演論文集. 18-19 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] R.Gu: "One-step phase shift system with 8-pixel-pitch fringe pattern" 精密工学会秋季学術講演会講演論文集. 235-236 (1993)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] 田中康司: "One-step GRASPによる動的形状計測" 精密工学会秋季学術講演会講演論文集. 55-56 (1994)

    • Description
      「研究成果報告書概要(和文)」より
  • [Publications] Yukitoshi Otani: "Hardening analysis in photo-hardening resin (II) -Measurement of temporal change of refractive index" Proc.Jpn.Soc.Precision Engineering. 551-552 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Yukitoshi Otani: "Hardening analysis in photo-hardening resin (III) - Measurement of residual stress" Proc.Jpn.Soc.Precision Engineering. 583-574 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Toru Yoshizawa: "Fringe scanning method by frequency modulation (1st report) Application for Moire topography" Proc.Jpn.Soc.Precision Engineering. 795-796 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Yukitoshi Otani: "Two-dimensional birefringence measurement using the phase shifting technique" Optical Engineering. 33. 1604-1609 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] R.Gu: "One-step phase shift 3-D surface profilometry with grating projection" Optics and Lasers in Engineering. 21. 61-75 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Yasushi Tanaka: "3D Measurement by one-step phase shifting method" Optical Metrology Symposium. 18-19 (1994)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] R.Gu: "One-step phase shift system with 8-pixel-pitch fringe pattern" Proc.Jpn.Soc.Precision Engineering. 235-236 (1993)

    • Description
      「研究成果報告書概要(欧文)」より
  • [Publications] Yasushi Tanaka: "Dynamic shape measurement by One-step GRASP (Grating Projection method for Profiling)" Proc.Jpn.Solc.Precision Engineering. 55-56 (1994)

    • Description
      「研究成果報告書概要(欧文)」より

URL: 

Published: 1996-04-15  

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi