1995 Fiscal Year Final Research Report Summary
Active Sound Insulation Using Piezoelectric Composite Film
| Project/Area Number |
06452188
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
Dynamics/Control
|
|---|
| Research Institution | Tohoku University |
|---|
Principal Investigator |
TANI Junji Tohoku University, Institute of Fluid Science, Professor, 流体科学研究所, 教授 (30006192)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
QIU Jinhao Tohoku University, Institute of Fluid Science, Research Professor, 流体科学研究所, 助手 (60241585)
JIANG Zhongwei Tohoku University, Faculty of Engineering, Associate Professor, 工学部, 助教授 (60225357)
TAKAGI Toshiyuki Tohoku University, Institute of Fluid Science, Associate Professor, 流体科学研究所, 助教授 (20197065)
SASAKI Minoru Gifu University, Faculty of Engineering, Associate Professor, 工学部, 助教授 (20183379)
CHONAN Seiji Tohoku University, Faculty of Engineering, Professor, 工学部, 教授 (20005424)
|
|---|
| Project Period (FY) |
1994 – 1995
|
| Keywords | Vibration Control / Sound Insulation / Piezoelectric Film / Composite Material / Self-Sensing |
|---|
| Research Abstract |
In order to make quiet environment the active noise control has been studied by means of the superposition of two sound with opposite phase. Furthermore the active vibration control has been studied to deaden noise generated from structures. However it is difficult to actively insulate sound due to spill-over.
In this study, a self-sensing actuator with perfect collocation was developed for the active vibration control and active sound insulation. As the self-sensing actuator, the piezoelectric film (PVDF) was used. A method using the phase discriminator was proposed to separate the sensor signal from the mixed signal of sensor and actuator.
To deaden the sound generated from structures and insulate the sound, the active vibration control of the thin plate and cylindrical shell was studied by means of the self-sensing actuator in conjunction with H* control theory, mu synthesis and sliding mode control theory. The effectiveness of the present method is verified by simulations and experiment.
|
