1995 Fiscal Year Final Research Report Summary
Formation of Fine Powder Membrane and Surface Reforming of Fluidizing Particles by Atomization Coating Method
| Project/Area Number |
06650863
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
化学工学一般
|
|---|
| Research Institution | Kyushu Institute of Technology |
|---|
Principal Investigator |
MATSUNO Yoshizo Kyushu Institute of Technology, Faculty of Engineering, Professor, 工学部, 教授 (20039093)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
OGURA Hironao Kyushu Institute of Technology, Faculty of Engineering, Assoctant Professor, 工学部, 助手 (40253554)
KAGE Hiroyuki Kyushu Institute of Technology, Faculty of Engineering, Associate Professor, 工学部, 助教授 (80142355)
|
|---|
| Project Period (FY) |
1994 – 1995
|
| Keywords | Coating, / Fluidized Bed, / Vibro-Fluidized Bed, / Circulating Fluidized Bed, / Glass bead, / Thermal operating factor, / Humidity, / Agglomeration |
|---|
| Research Abstract |
Using a fluidized bed coater, coating of glass beads with nylon and silica powder was carried out in order to investigate the effects of various operating conditions on coating efficiensy. Further, the possibility of the powder coating of fluidizing particles by the use of the vibro-fluidized bed and the circulating fluidized bed, which were considered to prevent the agglomeration among core particles in their coating processes, was investigated.
1.The coating efficiency was strongly related to the moisture content of the coating layr and the wettability of coating layr surface, and high coating efficiency was obtained under the experimental conditions when the coating layr contained a high moisture content.
2.A new index R was introduced and was defined as the ratio of the humidity of the outlet fluidizing gas to the humidity of the gas saturated adiabatically in the bed. It was confirmed that effect of thermal operating factors, such as bed temperature, humidity of fluidizing gas and feed rate of powder suspension, on the coating efficiency could be evaluated well by the index.
3.High coating efficiency was obtained and the progress of agglomeration among core particles was prevented with high amplitude and high frequency of vibration in vibro-fluidized bed.
4.Fluidizing particles were successfully coated with fine powder in circulating fluidized bed. Coating free of agglomeration among core particles was possible enough by the fluidizing gas of room temperature because of the effective heat transfer and active movement of particles in circulating fluidized bed.
|
Research Products
(12 results)
