1995 Fiscal Year Final Research Report Summary
Surface Modification in Dental Alloys by Ion Engineering
| Project/Area Number |
06671962
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
補綴理工系歯学
|
|---|
| Research Institution | Nagasaki University |
|---|
Principal Investigator |
HISATSUNE Kunihiro Nagasaki University, School of Dentistry, Associate Professor, 歯学部, 助教授 (20037526)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
BABA Koumei Nagasaki Technology Center, Research Associate, 研究員
YASUDA Katsuhiro Nagasaki University, School of Dentistry, Professor, 歯学部, 教授 (50013884)
UDOH Kouichi Nagasaki University, School of Dentistry, Instructor, 歯学部, 助手 (60145266)
TANAKA Yasuhiro Nagasaki University, School of Dentistry, Instructor, 歯学部, 助手 (10217086)
|
|---|
| Project Period (FY) |
1994 – 1995
|
| Keywords | dental alloy / surface modification / ion implanting / ion plating / ion mixing |
|---|
| Research Abstract |
The purpose of the present work is to obtain fundamental data for introducing ion engineering techniques in dental alloys. Ion implantation, plating and mixing techniques were employed. Ion implantation improved remarkably the corrosion resistance. A superlattice structure was formed by annealing after the implantation. However, it is a problem for the implantation surface to have rough surface. Ion plating produced a homogeneous coating surface and improved the strength and corrosion resistance. We got best results by ion mixing technique, which corresponds to use at the same time ion implantation and ion plating. This method has an additional merit which we can control the thickness of surface modification. During the present work, we also discuss the ordering mechanism in CuAu I,the formation of which is expected by annealing after the surface modification in dental gold alloy. The ordering proceeded in three stages (I,II and III). Stage I corresponds to the ordering by migration and annihilation of quenched-in excess divacancies. This ordering stage will be available on ion mixing treatment sample, because of be possible at room temperature.
|
Research Products
(12 results)
