1996 Fiscal Year Final Research Report Summary
Preparation of ferroelectric BaMgF_4films on GaAs for the control of two-dimensional electron gas
Project/Area Number |
07455134
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 一般 |
Research Field |
Electronic materials/Electric materials
|
Research Institution | TOKYO INSTITUTE OF TECHNOLOGY |
Principal Investigator |
TOKUMITSU Eisuke TOKYO INSTITUTE OF TECHNOLOGY,PRECISION AND INTELLIGENCE LABORATORY,ASSOCIATE PROFESSOR, 精密工学研究所, 助教授 (10197882)
|
Co-Investigator(Kenkyū-buntansha) |
AIZAWA Koji TOKYO INSTITUTE OF TECHNOLOGY,PRECISION AND INTELLIGENCE LABORATORY,RESEACH ASSO, 精密工学研究所, 助手 (40222450)
ISHIWARA Hiroshi TOKYO INSTITUTE OF TECHNOLOGY,PRECISION AND INTELLIGENCE LABORATORY,PROFESSOR, 精密工学研究所, 教授 (60016657)
|
Project Period (FY) |
1995 – 1996
|
Keywords | ferroelectric thin film / GaAs / BaMgF_4 / high electron mobility transistor (HEMT) / two dimensional electron gas / moleculat beam epitaxy (MBE) |
Research Abstract |
In this project, we have proposed a new device, ferroelectric-gate high electron mobility transistor (F-HEMT), in which two dimensional electron gas (2DEG) can be controlled by the polarization of the ferroelectric film. In order to realize the device, we have investigated the growth of ferroelectric BaMgF_4 thin films on AlGaAs/GaAs HEMT structures using molecular beam epitaxy (MBE). An MBE system used in this project consists of a road-rock chamber and two growth chambers, where one is used for Ga (Al) As growth and the other for BaMgF_4 growht. First, we have shown that the (140) -oriented BaMgF_4 films can be grown on GaAs substrates above 500゚C.However, it has been found that electron mobility of 2DEG decreases when the BaMgF_4 film is grown above 600゚C,because of the inter-diffusion of the constituent elements. In addition, 2-step growth method has been proposed to grow high quality BaMgF_4 films, where the thin (140) -oriented BaMgF_4 layr is grown at 550゚C for a short time followed by the low temperature (300゚C) growth of amorphous BaMgF_4 films. Good ferroelectric properties and sharp interfaces have been obtained by annealing the BaMgF_4 films grown by the 2-step method. We have also studied the dry etching of BaMgF_4 thin films using Ar/Cl_2 as etching gases and found that the etching damage is less serious for the film etched by dry-etching process than by the normal wet chemical etching. Finally, we have fabricated BaMgF_4/AlGaAs/GaAs F-HEMTs for the first time and shown that the device has proper transistro characteristics with non-volatile memory function because of the ferroelectric nature of the BaMgF_4 film.
|
Research Products
(13 results)