1998 Fiscal Year Final Research Report Summary
Super-precision machining using of activate surface phenomenon on the very small electric field
| Project/Area Number |
09450061
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
機械工作・生産工学
|
|---|
| Research Institution | Okayama University |
|---|
Principal Investigator |
NAKAJIMA Toshikatsu Okayama Univ., Faculty of Engineering, Professor, 工学部, 教授 (80026038)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
OHASHI Kazuhito Okayama Univ., The Graduate Shool of Natural and Technology, Reseach Asistant, 大学院・自然科学研究科, 助手 (10223918)
TSUKAMOTO Sinya Okayama Univ., Faculty of Engineering, Asistant Professor, 工学部, 助教授 (80163773)
|
|---|
| Project Period (FY) |
1997 – 1998
|
| Keywords | super-precision / grinding machining / activate surface phenomenon / very small electric field / condition optimization / tool condition / workpiece condition / relative movement condition |
|---|
| Research Abstract |
In order to put "Super-precision machining using of activate surface phenomenon on the very small electric field" to practical use, following two stage research has been carried out.
(1)Condition optimization of super-precision machining using of activate surface phenomenon on the very small electric field The phenomena in grinding machining are interacted by the tool condition, workpiece condition, relative movement condition, interference condition between workpiece and wheel, machining condition and cooling condition. In the case of super-precision grinding machining using of activate surface phenomenon on the very small electric field, the phenomena are interacted by the intensity of very small electric field and the maximum of cutting depth. Then in this approach the condition optimization of super-precision machining using of activate surface phenomenon on the very small electric field are searched by the objectively evaluation of surface roughness, machining accuracy of workpiece and alteration layer of workpiece.
(2) Experimental and theoretical research of super-precision machining using of activate surface phenomenon on the very small electric field
From the research results the grinding surface of the super-precision machining using of activate surface phenomenon on the very small electric field are generated by the huge group of cutting grooves, but the depth are constant by the intensity of very small electric field, so on the surface finish of workpiece is carried out as good condition.
|
