1999 Fiscal Year Final Research Report Summary
Development of micro plasma display pannel driven by radio frequency
Project/Area Number |
09555111
|
Research Category |
Grant-in-Aid for Scientific Research (B)
|
Allocation Type | Single-year Grants |
Section | 展開研究 |
Research Field |
電子デバイス・機器工学
|
Research Institution | Keio University |
Principal Investigator |
MAKABE Toshiaki Keio University, Department of Electronics and Electrical Engineering, Professor, 理工学部, 教授 (60095651)
|
Co-Investigator(Kenkyū-buntansha) |
YOSHIOKA Toshihiro NEC Corporation, Display Device Research Laboratory, Assistant Manager, 主任研究員
NAKANO Nobuhiko Keio University, Department of Electronics and Electrical Engineering, Assistant Professor, 理工学部, 専任講師 (40286638)
|
Project Period (FY) |
1997 – 1999
|
Keywords | Micro Cell Plasma (MCP) / Radio frequncy plasma / Plsma Display Pannel / Xe / Ne mixture / Chemical Ionization / Relaxation Continum (RCT) model / Plasma modeling / Capacitively coupled plama (CCP) |
Research Abstract |
(1) The fundamental basis of the research is in the "relation between the driving frequency and the maintained plasma size". The sustaining voltage as a function of pressure, distance and frequency is first investigated by using 1D-t modeling up to the size of micro cell. (2) Conventional plasma display panel, which consists of three electrodes parallel plate system covered by a thin insulator, driven at 100 kHz is numerically investigated as for the writing, scanning, and erasing. As a result, the function of these three electrodes has been clarified, The significant disadvantage of the conventional PDP driven at low frequency results from a large energy loss by the transport of massive ions produced in the cell to the wall. (3) Direct numerical procedure of the Boltzmann equation has been applied to investigate the influence of the gas mixture between Xe and Ne on the electron swarm parameter. The database of the electron swarm papameter has been constructed. (4) A capacitively coupled cylindrical cell plasma with micro meter size is proposed for "the Micro-Cell-Plasma". The characteristics of MCP driven at 50 MHz are simulated and discussed in detail.
|